Stone–Geary meets CES: the properties of an extended linear expenditure system

system

of changing lifestyles.More recently, Guerra et al. (2022) used a LES demand specification within a CGE model to evaluate the deadweight loss of taxation, while De Boer et al. ( 2023) compared LES with alternative econometric specifications of the demand system.
The advances in computing software have greatly facilitated the widespread use of CGE models.This diffusion has had two significant consequences worth mentioning.On the positive side, general equilibrium analysis has become a common instrument in the economist's toolkit, enabling the study of situations that would have been unthinkable a few decades ago.However, on the negative side, some contributions have fallen victim to the 'black box syndrome' , meaning that the structure of the models becomes opaque, and the underlying theoretical properties are often forgotten or neglected, making it difficult to rationalize the results.The more complex a model is, the more likely it is to fall into the syndrome if we do not explicitly clarify the basic theoretical properties that justify its structure.For these reasons, it is necessary that the functional forms adopted within the context of a model, CGE or otherwise, are adequately justified in terms of their empirical representativeness and well understood in terms of their theoretical implications.The increasing use of LES-type specifications falls within this consideration; hence, the need to understand their technical properties in detail as a minimum guarantee that the implications of their use are well understood and that the interpretations derived from the results are in accordance with the theory used.
In the above context, the Stone-Geary function still exhibits some limitations that do not align well with empirical evidence.One such limitation is the unitary elasticity of substitution implicit in the base Cobb-Douglas function.Another limitation is that the proportion of supernumerary income in the demand function is fixed and is not responsive to changes in prices.These limitations have led to the adoption of more general utility functions of the Stone-Geary variety, as seen in the structural change literature (Herrendorf et al. 2013;Comin et al. 2021) or in CGE modeling (Bchir et al. 2002).These extensions of LES use a constant elasticity of substitution (CES, Arrow et al. 1961) shifted function instead of the typical Cobb-Douglas function.However, the technical background and the conceptual advantages of using this extension to remove some of the limitations of standard LES have not been explored in detail.
The purpose of this brief note is therefore twofold.First, we demonstrate how the use of CES shifted functions helps eliminate constraints affecting the LES system, providing a formal explanation for this.We also explicitly demonstrate various properties of this formulation, properties that are often ignored or insufficiently known in some cases.Second, we illustrate how the standard LES identification procedure in CGE modeling (Jussila et al. 2012) easily generalizes to the case of a shifted CES function.For this purpose, we rely on recent estimates of the income elasticity of demand in the Spanish economy (Garcia-Villar 2018).
The paper adopts the following structure.In Sect.2, we recall the essential properties of the LES system.In Sect.3, we demonstrate the properties of the CES shifted expenditure system and compare it with the properties of standard LES.Section 4 presents an example of a calibrated demand function under the CES shifted property.Section 5 concludes.

The Cobb-Douglas shifted linear expenditure system
For the n-good case the Stone-Geary utility function is defined by: where z j ≥ 0 are minimum levels of consumption and α j non-negative weights that add up to 1.The solution to the utility maximization problem under the budget constraint imposed by income level m and given minimum consumptions z j yields demand functions: These demand functions satisfy that the expenditure on good j includes a fixed partgiven by the value at the current price of the minimal consumption of j-and a variable part that is a fixed proportion α j of the supernumerary (i.e., leftover) income:

Extension to CES utility functions
The CES utility function takes the form: In this expression θ = (σ − 1)/σ and σ = 1/(1 − θ) , where 0 ≤ σ < ∞ is the elasticity of substitution, which takes non-negative values only, and thus -∞ < θ ≤ 1.If desired, the nonnegative coefficients in (4) a j can be defined to add up to 1.We now shift the CES function using the minimum consumption levels z j ≥ 0: The shifted CES function inherits most of the properties of the standard CES function (monotonicity, convexity, differentiability but not homotheticity).The solution of the utility maximization problem (1) u(x 1 , x 2 , ..., (2) (3) involves combining the standard procedure 1 under a simplifying change of variable.We obtain the demand functions for the CES shifted utility: The expenditure system becomes now: with This demand system satisfies the following properties: Property 1 The terms s j (p) are non-negative proportions.Their sum over j is clearly 1.But unlike the fixed proportions in the standard LES system (3), the proportions s j (p) in (9) are price and substitution elasticity dependent.
Property 2 When σ = 1, which represents the LES Cobb-Douglas case, the proportions become constant.Indeed:

Property 3 The own derivatives have opposite signs depending on the substitution elasticity:
Take the derivative from expression (9) to obtain: The sign of the derivative depends only on whether σ < 1 or σ > 1.For complementary goods (0 < σ < 1) any increase in the price of good j will require a larger fraction of the (7) 1 See Varian (1992), Chapter 7, and Jehle and Reny (2011), Chapter 1.
leftover income to be devoted to the good getting more expensive.The reason is that for complements consumptions tend to move in the same direction and the good getting relatively more expensive will be the most affected in terms of expenditure.The consumer needs to devote a greater proportion of the leftover income to purchase the good in question.We can see this more clearly in the limit case of perfect complements.In this extreme case, consumption proportions are constant and, even if the allotted income falls, the share of leftover income needed for the good whose price increase becomes larger.The opposite occurs when goods tend to be substitutes (σ > 1).

Property 4
The cross derivatives have opposite signs depending on the substitution elasticity: The same intuition as in Property 3 helps to explain why.If good i becomes more expensive, and goods are complements, demand for j will fall too but the share s j (p) becomes smaller for good j since it is getting relatively cheaper than good i.
Property 5 Similar to the standard LES, the CES utility function with minimal consumptions is no longer homothetic.We calculate the marginal rate of substitution MRS i,j for the utility in (5) and along a ray x j = β • x i with β > 0 we obtain: whose value depends on the value of x i and thus the marginal rate of substitution is not constant.One of the criticisms to the use (or abuse) of homothetic utilities in applied work is that the real world does not seem to be homothetic.The shifted CES utility function with minimal consumption levels does not suffer from this problem.
We can visually illustrate the absence of homothecy in two ways.In Fig. 1, for example, we show how the marginal rate of substitution changes along a ray that passes through the coordinate origin.In Fig. 2, in contrast, we set a value for the marginal rate of substitution and verify that there is no ray passing through the origin that gives rise to that set value.

A calibrated demand function
When econometric estimates are not available, a circumstance we often face, an alternative to implement demand systems in numerical general equilibrium models (Dervis et al 1982;Shoven and Whalley 1984) is to use the simpler method of calibration.This method uses all available information to derive demand functions that are consistent with the data and the restrictions on parameters implied by utility maximization (Dawkins et al 2001).The goal of calibration is to have an empirical specification of expression (5) that has the property that when used to maximize utility, the solution endogenously yields the observed empirical data registered in some database.
A look at (5) shows that we need values for the n share coefficients a j , the elasticity of substitution σ (which gives us θ ) and the n minimum consumption levels z j .In total, 2n + 1 parameters.If the value of s is known, or assumed, this leaves 2n parameters Fig. 1 MRS not constant along a ray through the cartesian origin.Source: Our calculations using Graph (https:// www.padow an.dk) Fig. 2 MRS constant but not along a ray through the cartesian origin.Source: Our calculations using Graph (https:// www.padow an.dk) to be determined, or "calibrated".If we use input-output or social accounting matrix data, however, only n consumption observations are available.
We need some calibration tricks.The first one is to assume that all prices reflected in the database are unitary p j = 1.This entails a redefinition of the units in such a way that one physical unit has the worth of one currency unit.With this redefinition, all observed data in the database are now both value as well as physical units.This allows us to simplify expression (9) to: The second trick involves, when they are available, the use of income elasticities of demand η j .From expression (7), we can easily check that where α j (1) is the share of expenditure on good j over total income at the initial unitary prices.Substituting ( 11) into (10) we obtain a system of linear equations that can be solved conditional on the value of σ.The system in (10) has multiple solutions since if a j is a solution so is μ•a j for any scalar μ.Remember, however, that from the definition of the CES function the sum of these coefficients can be directly normalized to be 1.Thus, the system in ( 10) is determined.
The final trick needs to deal with the determination of the subsistence levels z j .This step requires the use of the Frisch parameter φ (Frisch 1959) which measures the flex- ibility in the distribution of income between the fixed and the variable parts of consumptions.At the initial unitary prices this gives: Substituting into expression (8) we can solve for the subsistence levels: As an illustration of the calibration procedure, we borrow income elasticities calculated for the two-digit 12 ECOICOP sectors for the Spanish economy from Garcia-Villar ( 2018).The fact that these estimated income elasticities are not unitary challenges the typical use of homothetic utility functions in numerical general equilibrium since, most commonly, the typical selection of preferences give rise to unitary income elasticities.2This justifies departing from homothetic functions and endorses the use of LES or the CES extended Stone-Geary utility functions.We use the reported value of the Frisch parameter ( φ = −2 ) from Deaton and Muellbauer (1980) along with two sensible small deviations around it.The central elasticity of substitution value corresponds to the (10) widely used Cobb-Douglas case ( σ = 1 ) but, again, we introduce deviations from this unitary elasticity value to appraise the sensitivity of the results.Finally, we use expenditure data for the same classification of goods taken from the ECOICOP data published by the National Institute of Statistics for 2017. 3Table 1 shows the calibration of the utility function coefficients.
Table 1 shows the data on income elasticities and expenditure for 2017, whereas Tables 2 and 3 show the calibrated parameters for the shifted utility function.To validate our results, we compare our findings with the data published by the National Institute of Statistics of Spain for the first income quintile in the base year 2017.Since the published data are presented as percentages, we calculate corresponding percentages derived from the calibrated minima for the central case of the Frisch parameter φ = −2 .Table 4 pre- sents the comparison between model results and actual data for the Spanish economy.The striking similarity observed in the numerical results of the last two columns of the table lends support to the calibration exercise we have carried out.

Concluding remarks
The Stone-Geary linear expenditure system correctly captures some rigidity properties of consumption demand by recognizing the existence of minimum consumption thresholds for specific goods.In a conventional linear expenditure system (LES), any consumption surpassing these minimum thresholds is allocated using fixed share coefficients.However, when we consider broader substitution possibilities, as seen in the CES displaced utility functions we examine here, the shares of excess consumption become sensitive to prices and to the elasticity of substitution, thereby enhancing households' ability to to fluctuations in prices that affect their real income.This type of response captures a more realistic empirical characteristic and may help in enriching the modeling  of the demand side in numerical general equilibrium models.It may also enable more reliable and realistic assessments of the welfare implications of various policies.Moreover, the CES displaced functions, being non-homothetic, adequately reflect the empirical nature of income elasticities.This concurs with numerous econometric studies that indicate that income elasticities do not exhibit unitary values.These conceptual properties of the demand structure must be adequately understood to be able to discern the reasons for the results that a model, CGE or of any other type, generates, even if it is only in a first approximation, so as not to fall into the opacity of black box type results.
Notice also that the focus on utility demand theory presented here can readily be reframed within the context of production theory.In this case, the technology would require a minimum level of primary factors-labor and capital-in order to operate.As a result, the resulting cost function would distinguish between variable and fixed costs.This contrasts with the customary approach in computable general equilibrium analysis, where the inclusion of fixed costs often relies on ad hoc rules with little theoretical backing.The challenges of this extension for CGE modeling are more empirical than formal.Conceptually, the extension is straightforward, as it only requires a redefinition of the cost minimization problem under a displaced production function of the CES type explored here.However, on the empirical side, a concept similar to that of the Frisch parameter should be defined within production theory to enable the calibration of the minimum use of factors.

Table 1
Data on estimated elasticities and reported expenditures for 2017Source: National Institute of Statistics for expenditure, García-Villar (2018) for the income elasticities.Expenditure in millions of current Euros

Table 2
Utility coefficients for alternative substitution elasticity values and φ = −2

Table 3
Minimum consumptions for alternative values of the Frisch parameter φ

Table 4
Calculated minima for the central calibration (φ = − 2) versus actual data for the first income quintile in 2017 in expenditure proportions