General conformable estimators with finite-time stability

In this paper, some estimators are proposed for nonlinear dynamical systems with the general conformable derivative. In order to analyze the stability of these estimators, some Lyapunov-like theorems are presented, taking into account finite-time stability. Thus, to prove these theorems, a stability function is defined based on the general conformable operator, which implies exponential stability. The performance of the estimators is assessed by means of numerical simulations. Furthermore, a comparison is made between the results obtained with the integer, fractional, and general conformable derivatives.


Introduction
Fractional calculus, the generalization of calculus to noninteger orders, besides looking to extend the classical mathematical results, has had many applications to physical systems since the 1970s of the twentieth century. The first results in this area involved the Riemann-Liouville integral and the Riemann-Liouville and Caputo derivatives, which are still widely studied and used [1][2][3][4][5][6][7][8]. Nevertheless, other definitions of noninteger operators have been developed; some recent classifications of the main operators and their properties appear in [9,10].
Given that the Riemann-Liouville and Caputo derivatives may deal with singularity issues in the kernel, some operators with nonsingular kernel have been proposed, such as Caputo-Fabrizio [11] and Atangana-Baleanu [12] derivatives; these operators are currently being studied extensively, and they have been used for both theoretical results and applications [13][14][15][16][17].
Furthermore, another reason for proposing other noninteger operators is that the Riemann-Liouville and Caputo derivatives do not satisfy the main results of classical calculus, such as the Leibniz product rule, the chain rule, the semigroup property, and the fundamental theorem, which would be expected to occur naturally for their use in applications. In this sense, Khalil et al. proposed the so-called conformable derivative [18]; this operator satisfies the properties mentioned and other mathematical results. Later, Abdeljawad used this definition to extend more results in calculus and linear systems [19].
Moreover, Akkurt et al. proposed the so-called generalized fractional derivative [31], which generalizes the operators defined by Khalil and Katugampola, while still satisfying the results from integer calculus. This derivative is called general due to the freedom of choice of its kernel k(t), where its adequate selection permits to obtain other operators as particular cases.
Additionally, Zhao and Luo defined another general version, called the general conformable derivative (GCD) [32], which is based on the linear extended Gâteaux derivative. This operator also generalizes the Khalil and Katugampola derivatives, but in this case the kernel not only depends on time, but also on the order α. This operator also satisfies the desired results from classical calculus and encompasses other derivatives as special cases.
On the other hand, the problem of finite-time stability becomes relevant in applications of dynamical systems, where theoretical asymptotic stability is not useful, but it is desired that the system trajectories reach the equilibrium in a determined finite time. Thus, this theme has been studied and developed formally [33][34][35][36]; some applications and specific problems can be found in [37][38][39]. Moreover, this subject has been addressed for fractional-order systems [40][41][42] and even for systems with conformable derivatives [43][44][45]. However, it has been reported that, in general, nonlinear fractional-order systems cannot have finite-time stability, but just under certain considerations [46,47].
Given that the GCD generalizes other operators and satisfies the classical calculus rules, it is of great interest to use it to develop results in theory and applications, which would enclose existing or possible results using conformable-type derivatives. Hence, in this paper, some nonlinear estimators for dynamical systems that involve the GCD are proposed. In order to verify the stability of these estimators, an exponential-like function is defined, based on the operator in question, which implies exponential stability. Using this function, some Lyapunov-like theorems are proven; then, some finite-time stability conditions are added to these theorems. The performance of the designed estimators is evaluated with numerical simulations; for this, the models considered are a mechanical system and a chaotic oscillator.
This work is divided as follows. In Sect. 2, the GCD is defined from the original conformable derivative; its properties and some results are presented. In Sect. 3, the so-called general conformable exponential function is defined, and then some Lyapunov-like theorems for systems with the GCD are proven. Section 4 presents some definitions and conditions required for finite-time stability, and the Lyapunov-like theorems previously defined are extended to consider them. In Sect. 5, a pair of nonlinear estimators with general conformable dynamics are designed, and they are proven to be finite-time stable in the general conformable sense. In Sect. 6, numerical simulations are used to assess the performance of the estimators; the procedure is applied to the general conformable models of the simple pendulum and the Van der Pol oscillator, and a comparison is made with their integer and fractional versions. Finally, conclusions and results are discussed in Sect. 7.

General conformable derivative
In this section, some definitions are presented in order to introduce the GCD. Definition 1 ([18]) Given a function f : [0, ∞) → R, the conformable derivative (CD) of f of order α is defined by In order to extend and give a physical and geometrical interpretation to this derivative, the following definitions are required.
where U is a Banach space. We define the space of admissible variations for F, denoted by V, as follows: Definition 3 ([48]) Given F : U → R, we define the Gâteaux variation of F at u ∈ U on the direction ψ ∈ V, denoted by δF(u, ψ), as follows: if such a limit is well defined. Furthermore, if there exists u * ∈ U * such that we say that F is Gâteaux differentiable at u ∈ U, and u * ∈ U * is said to be the Gâteaux derivative of F at u, where ·, · U is the duality pairing between U and U * . Finally, we denote is just the directional derivative of f when ψ is a unit vector. Thus we have that and this holds ∀ψ ∈ R n .

Definition 4 ([32])
Suppose that X and Y are locally convex topological vector spaces, if the limit exists.

Definition 5 ([32])
Suppose that X and Y are locally convex topological vector spaces, if the limit exists.
The LEGD satisfies the same properties of the Gâteaux derivative. Moreover, regarding the concept of local fractional derivative (LFD), the following principles need to be considered [32]: P1. LFD should degenerate to the usual first-order derivative when the fractional order equals one. P2. LFD should have properties consistent with the classical derivative as much as possible. P3. LFD should have clear physical or geometrical interpretations. The LEGD satisfies P2 and P3. In order to satisfy P1, the following definition is introduced.

Definition 6 ([32]) A continuous real function ψ(t, α) is called a conformable function if it satisfies
Finally, the definition of the operator used in this work is presented. Definition 7 ([32]) Let ψ(t, α) be a conformable function and α ∈ (0, 1]. The general conformable derivative (GCD) is defined as if the limit exists.
Moreover, consider the operator proposed by Katugampola.
Remark 4 The GCD satisfies the same properties as the LEGD, as well as Rolle's and mean value theorems [32].
Remark 5 Henceforth, a function is said to be α-differentiable if it is differentiable in the sense of the GCD, with order α.
Furthermore, define the inverse operator of the GCD.
Then the α-order general conformable integral of f is defined as if the Riemann integral exists.
Moreover, consider the following result.
, then f is an increasing (respectively decreasing) function.
Proof The proof of this lemma follows from the mean value theorem for the GCD [32]. Remark Then

General conformable exponential stability
Consider the following class of nonlinear systems: where x ∈ R n , f : R + × R n → R n is a given nonlinear function satisfying f (t, 0) = 0 ∀t ≥ 0 and α ∈ (0, 1).
Definition 10 The origin of system (1) is said to be i) stable if, for every ε > 0 and t 0 ∈ R + , ∃δ(ε, t 0 ) such that, for any x 0 ∈ R n , iii) asymptotically stable if it is stable and attractive. iv) globally asymptotically stable if it is asymptotically stable for any x 0 ∈ R n .
The following definition is the essential tool to prove the stability results for this class of systems.
Remark 10 It is not difficult to verify that Now, the notion of general conformable exponential stability is introduced.

Definition 12 The origin of system (1) is general conformable exponentially stable (GCES) if
with t > t 0 and C, γ > 0.
The following theorems serve to prove stability in the sense of Lyapunov for the class of systems considered.
Theorem 2 Let x = 0 be an equilibrium point for system (1). Let V : R + × R n → R be an α-differentiable function and a i (i = 1, 2, 3) be arbitrary positive constants. If the following conditions are satisfied: Applying Lemma 2 to this inequality, we have Also from (i) we have with C = √ a 2 /a 1 and γ = a 3 /2a 2 . Therefore, the origin of system (1) is GCES.
Definition 13 A continuous function k : R + → R + is said to belong to class K if it is strictly increasing and k(0) = 0. It belongs to class K ∞ if lim t→+∞ k(t) = +∞.
Theorem 3 Let x = 0 be an equilibrium point for system (1).
To prove this, assume that L > 0. From conditions (i) and (ii) and Lemma 1, we have Thus from Lemma 2 we have which is a contradiction to the assumption for L. Therefore, L = 0 and from (i), lim t→∞ x(t) = 0, so we have for some C, γ > 0. Hence, the origin of system (1) is GCES.

Finite-time general conformable exponential stability
From Remark 6, dynamics with GCD can be seen as an integer-order dynamics weighted by a time-dependent term Thus, systems with GCD might be conceived as integer-order nonautonomous systems. Hence, the following definitions will be used [36].
Consider the integer order systeṁ where f : R + × R n → R n is a continuous function. φ x t (τ ) denotes a solution of (4) starting from (t, x), and S(t, x) represents the set of all its solutions. V denotes a neighborhood of the origin in R n , and B is an open ball centered at the origin of radius .
Here, the term T 0 (t, x) is called the settling time with respect to the initial conditions of system (4). 3. There exist a positive definite continuous function α : R + → R + such that the settling time with respect to the initial conditions of system (4) satisfies Now, consider again system (1) Its equivalent integer-order form iṡ where the conformable function ψ(t, α) is different from zero ∀t ∈ R + , ∀α ∈ (0, 1). (1), where f is continuous.

Proposition 1 Let the origin be an equilibrium point for system
with a positive definite continuous function r : then the origin of system (1) is finite-time stable. ii) If in addition V (t, x) is decrescent, then the origin of system (1) is uniformly finite-time stable. iii) If in addition system (1) is globally defined and V (t, x) is radially unbounded, then the origin of system (1) is globally finite-time stable.
Proof Considering system (1) as its integer-order version (5), the proof follows from the proof of Proposition 4.1 in [36].

Definition 18
Let the origin be an equilibrium point for system (1) Furthermore, if k 1 ∈ K ∞ and system (1) is globally defined, then the origin of system (1) is globally FGCES.
Proof From i and ii, the origin of system (1) is GCES (from Theorem 3), and thus there exists a continuous and differentiable Lyapunov function V (t, x).
Moreover, from the proof of Theorem 3, we get and, following the alternative form of the GCD, we havė ψ(t,α) ; it can be verified that r(0) = 0. Furthermore, by using the change of variables [0, Finally, from [36] we have Hence, the origin of system (1) is finite-time stable. Therefore, the origin of system (1) is FGCES.
Moreover, if k 1 ∈ K ∞ , it means that V (t, x) is radially unbounded. If, in addition, system (1) is globally defined, the origin of system (1) is globally finite-time stable. Therefore, the origin of system (1) is globally FGCES.

Design of nonlinear estimators
In this section, the stability results presented previously are used to design a pair of estimators for dynamical systems with the GCD. Then it is proven that the estimation error obtained is FGCES.
Consider the following class of commensurate-order nonlinear systems with single output: where α ∈ (0, 1), x ∈ R n is the state vector, u ∈ R m is the control input, y ∈ R is the output, and f : R n × R m → R n is a locally Lipschitz vector function in x and uniformly bounded in u.
Rewrite the system to its canonical form where A is an upper shift matrix (A : R n → R n , A i,j = δ i+1,j , with δ i,j the Kronecker delta), C = [1 0 0 . . . 0], the pair (A, C) is observable, and ϒ(x, u) is a nonlinear vector that satisfies the Lipschitz condition locally in a region D. The estimators will be designed based on this equivalent system; their estimation error is bounded by the general conformable exponential function (2).

LQR-based estimator
Consider the following estimator based on a linear quadratic regulator (LQR) [50]: wherex, K i ∈ R n , 1 ≤ i ≤ m. Consider the following lemma.

Lemma 3 ([50]) Given a stable n × m matrixÂ and γ > 0, there exists a positive definite, symmetric matrix P such that
if and only if there exists another positive definite, symmetric matrixP such that AP +PÂ T + γ 2PP + I < 0.
The following LMI is equivalent to (10) Now, for some ε > 0, Let υ = ϒ(x, u) -ϒ(x, u). Considering condition (8), the estimation error e = x -x, and the solution P of (11), we have Remark 12 An estimator is said to be finite-time general conformable exponentially stable if the estimation error e obtained with it is FGCES. (7) with pair (A, C) observable. IfĀ = A -K 1 C is stable and M i = P i-1 K i C is positive semidefinite for 2 ≤ i ≤ m, then the LQR-based estimator (9) is a finite-time general conformable exponentially stable estimator for system (6).

High-gain observer
Consider the following high-gain observer (HGO) [51]: where Remark 13 Given that F ∞ is constant, ψ D α F ∞ = 0, and hence it may be calculated from The coefficients of F ∞ are given by where α i,j is symmetric positive definite, independent of θ .

Theorem 6
The high-gain observer (17) is a finite-time general conformable exponentially stable estimator for system (6).
Proof From (7) and (17), the dynamics of e is with υ = ϒ(x, u) -ϒ(x, u). Consider V = e 2 F ∞ = e T F ∞ e a candidate Lyapunov function that satisfies the Rayleigh-Ritz inequality Moreover, from Remark 9 and (18) we have Thus, from condition (8), for θ > 2ϕ + 1, According to Theorem 2, from (20) and (21) it follows the origin of system (19) is GCES, and we have , and e 0 = e(t 0 ). Furthermore, from (21) and the properties of norms, we have . We have that r(0) = 0 and 0 Thus, the origin of system (19) is finite-time stable. Therefore, the origin of system (19) is FGCES, and hence system (17) is a finite-time general conformable exponentially stable estimator for system (6).

Numerical simulations
In this section, the results of numerical simulations of the estimation scheme proposed are presented. For this, the general conformable estimators were designed and applied based on the models of two dynamical systems with GCD. In addition, the performance of the scheme with integer, fractional, and general conformable dynamics is compared. The simulations were carried out using Simulink® from MATLAB®; moreover, to implement the fractional case, the noninteger fractional derivative from D. Valério was used [52].

Simple pendulum
Consider the extension of the simple pendulum to its noninteger order version, studied e.g. in [53][54][55]: where x 1 = θ (angular position), x 2 = ω (angular velocity), g = 9.81 m/s 2 , and L = 1 m. Rewriting it to the canonical form, we have L , and C = [1 0]. A mechanical system with noninteger dynamics has the effect of additional damping on the trajectories [54,55] which can be understood as an extra parameter that varies with the choice of the order. When using the GCD, due to the freedom to choose the order α as well as the conformable function ψ(t, α), the resulting system gets some additional time-varying parameters. For instance, the graphs of the states show that the oscillation frequency varies.
From (9) with m = 3, the LQR-based estimator for system (22) is     From these results it can be seen that the fractional case performs slightly better than the integer one, but it does not reach the equilibrium in the time scale shown (corresponding to 100 s); this can be appreciated also in a slightly increasing slope in the ISE for the fractional case. Moreover, the other cases present finite-time stabilization, but with the GCD operator, the signals converge faster and smoother.
Consider now HGO (17) for the pendulum system ψ D αx 1 =x 2 + 2θ (x 1 -x 1 ),  Simulations were performed using the same initial conditions of the former estimator with θ = 25 and the same conformable function. Figures 9 and 10 show the state estimations; it can be seen that the estimated signals reach the equilibrium around 0.25 seconds. Figures 11 and 12 show the comparison of the estimation errors obtained from the integer, fractional, and GCD operators for the same models and parameters in logarithmic time, while Figs. 13 and 14 show in major detail these comparisons. Finally, Figs. 15 and 16 show the performance measure of the errors, obtained using the ISE.
Similar to the results obtained from the LQR-estimator, it can be seen that the fractional case performs slightly better than the integer one; however, it does not reach the equilibrium in the time scale shown (corresponding to 100 s); a major amplification would show that the signals still fail to reach the origin. Also, a slightly increasing slope appears in the Figure 8 Comparison between the ISE for e 2 obtained from the LQR-based estimator with integer, fractional, and GCD for the simple pendulum Figure 9 Comparison between x 1 andx 1 obtained from the high-gain observer with the GCD for the simple pendulum Figure 10 Comparison between x 2 andx 2 obtained from the high-gain observer with the GCD for the simple pendulum Figure 11 Comparison between e 1 obtained from the high-gain observer with integer, fractional, and GCD for the simple pendulum ISE for the fractional case. Furthermore, the other cases present finite-time stabilization, but with the GCD operator, the signals converge faster and smoother.

Figure 12
Comparison between e 2 obtained from the high-gain observer with integer, fractional, and GCD for the simple pendulum   Comparison between the ISE for e 1 obtained from the high-gain observer with integer, fractional, and GCD for the simple pendulum

Van der Pol oscillator
The Van der Pol oscillator is a chaotic system proposed to study oscillations in vacuum tube circuits [56]. Its noninteger counterpart has been studied e.g. in [57][58][59]. The ex- Figure 16 Comparison between the ISE for e 2 obtained from the high-gain observer with integer, fractional, and GCD for the simple pendulum tended model is where ε is a control parameter. Rewriting it to its canonical form, we have This case may be seen as a master-slave synchronization problem. The Van der Pol system will perform as the master system, and the estimators will serve as the slaves, so they will look for synchronizing with it.
From (9) with m = 3, the LQR-based estimator for system (23) is        From these results it can be seen that the fractional case performs better than the other, with a smaller overshoot, but it does not reach the equilibrium in the time scale shown (corresponding to 100 s); this can be appreciated also in a slightly increasing slope in the ISE for the fractional case. Moreover, the other cases present finite-time stabilization, but with the GCD operator, the signals converge faster and smoother. Furthermore, Fig. 25 shows the phase portrait obtained withx 1 andx 2 . Now, consider HGO (17). For the Van der Pol oscillator, the observer is Simulations were performed using the same initial conditions of the former estimator with θ = 1 and the same conformable function. Figures 26 and 27 show the state estimations; it can be seen that the estimated signals reach the equilibrium around 2.5 seconds. Figures 28 and 29 show the comparison of the estimation errors obtained from the integer, fractional, and GCD operators for the same models and parameters in logarithmic time, while Figs. 30 and 31 show in detail these comparisons. Finally, Figs. 32 and 33 show the performance measure of the errors, which was obtained using the ISE.
Similar to the results obtained from the LQR-estimator, it can be seen that the fractional case performs better than the other, with a smaller overshoot, but it does not reach the equilibrium in the time scale shown (corresponding to 100 s); this can be appreciated in a slightly increasing slope in the ISE for the fractional case. Furthermore, the other cases Figure 27 Comparison between x 2 andx 2 obtained from the high-gain observer with the GCD for the Van der Pol oscillator Figure 28 Comparison between e 1 obtained from the high-gain observer with integer, fractional, and GCD for the Van der Pol oscillator

Figure 29
Comparison between e 2 obtained from the high-gain observer with integer, fractional, and GCD for the Van der Pol oscillator present finite-time stabilization, but with the GCD operator, the signals converge faster and smoother. Furthermore, Fig. 34 shows the phase portrait obtained withx 1 andx 2 .

Concluding remarks
In this paper, an LQR-based estimator and a high-gain observer were proposed for a class of nonlinear systems with the general conformable derivative on their dynamics. By defining a general conformable exponential function, the estimators were proven to be finitetime stable in the sense of the derivative used by means of Lyapunov-like theorems. Then, to validate the proposed estimation scheme, simulations were performed on the general conformable models of the simple pendulum and the Van der Pol oscillator. Later, the results obtained with the conformable operator were compared with those obtained with the integer and fractional versions of the systems.  Regarding the results, the fractional case generally had a smaller overshoot than the integer and conformable cases; however, for the time scales shown, the signals in the fractional case did not reach the equilibrium. Furthermore, the integer and conformable cases presented finite-time stability, but the conformable case had a better performance than the integer one, showing a faster convergence though with a similar overshoot. Hence, as it was stated formerly, the fractional case did not present finite-time stability; the integer and conformable cases did, but the latter outperformed the former in the simulation results. In the graphs shown, it may be appreciated that, with the general conformable operator, the estimation error converges faster and the ISE is much smaller than with the other derivatives.
Comparing the estimators, both presented an acceptable performance with both systems, and their different outcomes depended on the choice of their parameters.

Figure 33
Comparison between the ISE for e 2 obtained from the high-gain observer with integer, fractional, and GCD for the Van der Pol oscillator Figure 34 Phase portrait of the Van der Pol oscillator with the estimated states obtained from the high-gain observer Finally, it is worth to note that these results may be improved through an adequate selection of the estimator gains and the conformable function ψ(t, α), which also depends on the system to which this estimation scheme is applied.