Shape adaptive IRS based SAG IoT network

6G technology connects physical and digital, and ubiquitous 6G services will provide convenience to users around the world. The concept of the world-earth integrated network is to seamlessly integrate these three subnets to better adapt to future development. This article introduces the world-earth integrated network and shape-adaptive IRS antenna technology. The shape-adaptive IRS antenna described in this article is made of flexible materials, and the physical shape of the antenna can be changed according to different situations, and specific radiation beams can be generated according to functional requirements. And the effectiveness of the shape-adaptive IRS antenna technology has been proven in the simulation results.

space, air, and ground (SAGIN) will play an important role in some important social and production environments. For example, in no man's land, earthquake/flood, and other situations, satellite communication is used to obtain information in specific areas, and the information is widely transmitted through the interconnection with the ground cellular network, so as to realize large area rapid rescue and emergency communication. For another example, UAVs and other flying equipment are equipped with a variety of sensors and high-definition cameras to realize ubiquitous Internet of Things applications based on radar integration technology. Now, many companies are beginning to use the concept of SAGIN to carry out projects. SAGIN's wide coverage, large processing capacity, and flexibility make it useful in areas such as geographic information processing, highly sensitive traffic command (ITS) [4], military operations, and rescue of the wounded [5]. In particular, the satellite system will connect mountains, deep seas, polar regions, and villages into one. The use of airspace networks will improve the ability of high service requirements, and the high data rate access benefits from the massive deployment of systems in a region. The technology foreshadowing will provide a path for future communication development, especially for 5G and 6G [6][7][8]. On the other hand, intelligent reflective surface (IRS) technology is considered to be one of the prospective technologies of 6G [9][10][11]. Its main function is to control the signal amplitude through software programming according to the channel feedback information to achieve the purpose of enhancing the performance of the wireless link. It can be regarded as a large-scale passive antenna array, which has lower power consumption, higher efficiency, and reliability than traditional wireless communication equipment. And there is no need for complicated interference management between IRSs.
6G technology connects physical and digital, and ubiquitous 6G services will provide convenience to users around the world. The concept of the world-earth integrated network is to seamlessly integrate these three subnets to better adapt to future development. This article introduces the world-earth integrated network and shape-adaptive IRS antenna technology. The shape-adaptive IRS antenna described in this article is made of flexible materials, and the physical shape of the antenna can be changed according to different situations, and specific radiation beams can be generated according to functional requirements. Integrating IRS on aviation equipment can not only increase transmission capacity but also save platform space. For the question of whether the IRS antenna is effective, we can use the simulation results to show that the IRS antenna is effective.
The rest of this article will cover the following. In the second section, this article introduces the basis of SAGSIN, including its overall structure and four sub-networks. In the third section, this paper introduces the structure and implementation of shape-adaptive IRS. After that, the simulation results of human-machine recognition will be put in the fourth section. Finally, is the summary of this article.

The components of SAGIN
Space, air, and ground are the three-tier structure of SAGIN. As shown in Fig. 1, these three-tier structures can work without relying on others, or cooperate with each other Fig. 1 An architecture for space-air-ground integrated network. As shown in the figure, these three-tier structures can work without relying on others, or cooperate with each other to play a role, and by integrating heterogeneous networks between them, layered broadband wireless networks can be easily built

Near-space: HAPS
Aviation network is a mobile communication system that uses aircraft as a tool for information acquisition, processing, and dissemination. Intersecting the ground network base station (BS), it has the characteristics of low cost, fast laying, wide service range, and convenient regional wireless access.
At present, the energy supply of the High Altitude Platform Station (HAPS) system is mainly provided by solar energy plus energy storage, because solar panels are suitable for installation on it, and HAPS can provide wireless services to network users due to its low latency characteristics.
The era of portable data centers, smart signal conditioners, and smart machine learning is getting closer. HAPS can make the best choice for a large number of drones and smart cars. As shown in Fig. 2, the framework proposed in this article is as follows.
Compared with the original technology, HAPS no longer needs to install thousands of relay stations on the ground and can achieve efficient and reliable long-distance communication between satellites. At the same time, it can also be used as a data center to be distributed in various places. The satellite's trajectory, collision, and other information. In addition, with the help of satellites, HAPS can realize the function of fast handover. HAPS uses technologies such as edge intelligence to simplify calculations and manage large-scale unmanned aerial vehicles (UAV) groups, which will greatly facilitate the flow of goods. At the same time, the HAPS layer provides high-speed Internet and wireless communication systems in cities, mountains, oceans, and other areas to reduce dependence on satellites.

Air: mid-to low-altitude UAVs
Single UAV network has been widely used in military, civil, and public fields [15]. A single satellite communications hop (or double hop) provides command and control on the forwarding link, while monitoring product and drone parameters for simultaneous delivery on the return link. One of the main reasons for using multi-drone networks is the distributed processing capability of multi-drone networks. Specifically, they separately search for a number of suspicious targets and share information through collaborative communication. In addition, a transceiver-equipped drone can act as an aerial base station to expand communication coverage and increase network capacity. In addition to be a mobile relay or flight base station, the UAV can be used as a mobile cloud and fog computing system. The UAV-mounted cloud/fog provides a low-latency application unload opportunity for the mobile terminal. Drones can also enable Fog Computing to deliver high-quality streaming media, moving users through nearby wireless proxies and access points.

Terrestrial network: cellular network
A terrestrial network consists primarily of terrestrial communications systems, such as cellular networks, mobile ad hoc networks (MANET) [16], worldwide interoperability for microwave access (WiMAX) [17], and wireless local area networks (WLAN). Cellular networks, in particular, have evolved from the generation 1 (1G) to the generation 2 (2G) and the generation 3 (3G) after the generation 4 (4G) or advanced long-term evolution (LTE-A) [18], now, it is moving toward a 5G wireless network to support a variety of services. As for standardization, the Third Generation Partnership Project (3GPP) has created a set of standards for cellular/mobile networks.
5G is the latest generation of cellular mobile communication technology, which is an extension of 4G (LTE-A, WiMAX), 3G (UMTS, LTE), and 2G (GSM) systems. The performance goals of 5G are high data rates, reduced latency, energy savings, reduced costs, increased system capacity, and large-scale device connectivity.B5G has increasingly higher requirements for high data rate, high capacity, seamless coverage, low latency, high reliability, low power consumption and low cost, and the interconnection of everything. In the future, the demand for ultra-high-speed data transmission is not limited to land. With the development of technology, the space for human existence and activity is becoming wider and wider, and there are also communication needs in sea and airspace.
The 6G network will be a fully connected world, combining wireless terrestrial and satellite communications. Global seamless coverage is achieved by integrating satellite communications into 6G mobile communications, 6G communication technology is no longer a simple breakthrough in terms of network capacity and transmission speed, what's more important is to narrow the digital divide and connect everything.6G will use the terahertz (THz) frequency range, and the "densification" of 6G network will also reach the level that can't be achieved before.

Spectrum management
In SAGIN heterogeneous networks, different networks may use different wireless spectrum resources. Efficient management of the radio spectrum in SAGIN networks is required to make more efficient use of the radio spectrum and avoid inter-system interference in the future. Dynamic spectrum sharing is an important means to improve spectrum effectiveness and optimize network deployment. By adopting intelligent and distributed spectrum sharing access mechanism, the available spectrum range can be flexibly expanded and the spectrum usage rules can be optimized to meet the future demand of large bandwidth, ultra-high transmission rate, and multi-scene in threedimensional space. At the same time, it is necessary to actively promote blockchain cooperation, AI, dynamic spectrum sharing and other technologies to achieve intelligent spectrum sharing and supervision of SAGIN network.

Mobility management and network switching
Mobility management is the management of mobile terminal location information, security, and business continuity, and strives to achieve the best contact status of the terminal and the network to provide a guarantee for the application of various network services. Compared with the terrestrial communication network, the satellite network has a small overall capacity and limited single-star capacity, and to ensure the user experience, the satellite communication system needs to design suitable user access and switching strategies. This includes selecting suitable satellite beams and suitable satellite channels for the user. At the same time, because of the high-speed movement of satellites of loworbit satellite systems relative to the ground, each satellite may serve a length of only a few tens of seconds, and multiple satellite switching may be included in one operation. Satellite system switching can be divided into switching between beams within the same satellite and between beams of different satellites, as well as switching between stations across the ground. Besides, switching between different communication systems can be involved in air, sky, and earth.

New generation antenna and radio frequency technology
Compared to traditional antennas, the future antenna has the characteristics of miniaturization and large scale. It is said that the 6G system antenna will be "nano-antenna, " which will subversively change and traditional antennas and radio, integrated electronic products and new materials, empower ultra-large antenna technology, integrated RF front-end system key technologies.
At present, the theory and engineering design of VLAS are still faced with a large range of cross-band, space-space-earth coverage, and other problems. At the same time, it is necessary to actively explore the key components of high efficiency and easy integration of the front-end transceivers and receivers, as well as key technical issues such as the radiation and scattering of antennas, so as to break through the super-large-scale MIMO front-end system. In addition, the power consumption of the antenna system and the interference between the array elements are also the research hotspots. Intelligent reflector and configurable antenna system are some of the most promising technologies.

Basic introduction to IRS
Along with the rapid development of information metamaterial technology and the huge demand for 5G millimeter wave and 6G terahertz communications, the combination of information metamaterial technology and cellular mobile network technology has become a research hotspot in the wireless communication field. The "passive" reflection characteristic of IRS technology is one of the main research directions.
Generally, the function of the IRS plane is to reflect incident electromagnetic waves, and it is composed of a large number of artificial units. The reflection characteristics (including amplitude, phase, etc.) of each artificial unit are independently controllable. IRS can produce different numbers of reflected beams, and can also beam-form the reflected waves. With this feature, deploying IRS in a wireless network can artificially change the propagation environment of wireless signals to complete communication. Figure 3 shows a typical IRS structure, including three layers and an intelligent controller. The first layer is the reflecting surface of the IRS, which is composed of a large number of artificially designed electronic reflecting units. Each reflecting unit has at least two states to represent binary information. A large number of artificial units reflect the incident wave and form different reflected beams as a whole. The second layer is a metal shielding layer, they can prevent the leakage of energy behind the IRS signal. The third layer is the control circuit board, which can be designed and implemented by FPGA, etc., which is responsible for stimulating the simulation unit and adjusting the reflection characteristics of the simulation unit in real time. In addition, the IRS also includes an intelligent controller, which is the core control unit of the IRS. The intelligent controller is connected to the base station of the wireless network through a feeder or wireless and receives the IRS channel information sent by the base station, thereby completing the control circuit board to adjust the reflection characteristics of the artificial unit.
As a new auxiliary wireless network communication method, IRS has many advantages. First, the reflected signal is directed to the "blind" or weak coverage area of the wireless network through beamforming to enhance the energy of the received signal and improve the channel transmission rate, thus enhancing the wireless network coverage. Secondly, by adjusting the phase of the infrared reflected beam, it can reduce the energy of the interference signal and improve the spectral efficiency. Moreover, the IRS itself does not have any interference. Third, IRS allows full duplex mode to work with high efficiency of upstream and downstream transmission. Fourth, the IRS does not have radio frequency transmitting unit, the artificial unit is passive, the reflection of the incident wave does not consume energy. So IRS is a way of green communication. Fifth, IRS is made up of a large number of low-cost manual units, which are low cost to implement. In addition, IRS is relatively easy to deploy in both indoor and outdoor environments.
In general, IRS has signal enhancement capability and signal neutralization capability. The infrared signal enhancement function can improve the information transmission Fig. 3 The typical architecture of IRS. The figure shows a typical IRS structure, including three layers and an intelligent controller. The first layer is the reflecting surface of the IRS, which is composed of a large number of artificially designed electronic reflecting units. Each reflecting unit has at least two states to represent binary information rate and expand the coverage range of wireless signal. The signal neutralization capability can reduce intercell interference and multi-user interference and improve the SNR of received signals. At the same time, by suppressing the signal energy of "eavesdropper" users, secure communication can be realized. In addition, the simultaneous transmission of data and energy can also be achieved by deploying infrared spectra near the energy collection nodes, since energy can be obtained from wireless signals.

Shape-adaptive IRS
From the physical structure point of view, the surface of the IRS is composed of a large number of sub-wavelength artificial units. Logically, these artificial units can be periodically arranged horizontally or vertically in one dimension, or they can be arranged periodically in two dimensions. This is similar to the appearance of a traditional array antenna. Because in wireless communication systems, IRS is mainly used to reflect incident waves, so IRS can also be called a passive reflect array.
As a typical antenna array technology, phased array antenna (PAA) technology has achieved great success. Generally, PAA is composed of radio frequency circuit, power divider, phase shift circuit and power amplifier, antenna unit, and so on. In the drive type of the radio frequency circuit, the phase shift circuit sequentially shifts the phase of the signal transmitted from each antenna unit. At the same time, according to the desired beam, the power divider and amplifier distribute different signal energy in the number of antenna elements.
Learning from the implementation of PAA technology, IRS can also reconstruct the reflection characteristics of the IRS surface by changing the phase of the artificial unit in real time, thereby generating beams with different directions and different numbers of beams to support simultaneous multi-user communication, as shown in Fig. 4. In an IRS-assisted wireless communication system, the base station informs the FPGA controller of the number of reflected beams and the direction of beamforming through wireless or dedicated feeders. The latter calculates the phase of each artificial unit in reverse and adjusts the phase of each unit. Electromagnetic state, so as to obtain the desired pointing beam. Unlike PAA, which is usually suitable for narrowband applications, IRS with phase shift control can implement a variety of wideband applications.
IRS can realize communication similar to multi-user MIMO [19]. We consider performing linear transmission precoding on the AP. Therefore, the complex baseband transmission signal at the AP can be expressed as where s j is the j-th user transmission data and w j ∈ C M+1 is the corresponding beamforming vector. It is supposed as an independent random variable, whose mean and variance are zero and 1, respectively. The system model of a single user in MIMO IRS is where the baseband channels from AP to IRS, IRS to user k , and AP to user k are denoted as G ∈ C N ×M , h H r,k ∈ C 1×N and h H d,k ∈ C 1×M , respectively, k = 1, . . . , K and n k ∼ CN (0, σ 2 k ) denotes the additive white Gaussian noise (AWGN).We denote The parameters G and are as follows: (1) β n e jθ n . . . From the above model, it can be known that for an IRS containing N antenna elements, its receiving channel matrix G: Its reflection matrix H r : Suppose the channel vector is as follows: where V H x ∼ CN 0, I D k ,D k is the number of ray.
suppose the antenna configuration of the rectangular antenna array is where φ x,i ∈ [0, 2π) is direction angle and θ x,i ∈ (− π 2 , + π 2 ) is pitch angle. Suppose the antenna configuration of the rectangular antenna array is N = N ROW × N RING , The arc length between the two seismic sources is d. The projection distance of the n RING unit in the beam direction is d n RING φ x,i : a H θ x,i = 1 · · · e j2π d (n−1) sin θ x,i · · · e j2π d (N −1) sin θ x,i , Then, we can get: where NEW () indicates that a new vector is generated. By flexibly changing the electromagnetic state of each artificial unit, IRS can realize different applications. However, this has very high requirements for the calculation and control capabilities of the IRS controller and the design of the IRS manual unit. In order to reduce the complexity of IRS technology implementation, a physically deformable IRS can be designed to meet different application requirements. (19) . . In order to realize a physically deformable IRS, it is necessary to connect various artificial units on the surface of the IRS by an expandable soft material. The shape-adaptive IRS can flexibly change the shape through mechanical control, thereby alleviating the requirements for IRS controller and manual unit design, as shown in Fig. 5. In fact, the ability to adjust the direction of the IRS reflected beam through phase control is limited. When the UE moves outside the coverage of the IRS reflected signal, the shape of the IRS can be adjusted adaptively, such as the shape of the IRS according to the transformation form of the cylindrical patch antenna array, so that most of the artificial unit's reflected signal on its surface Pointing to the current location of the UE can provide the UE with continuous and uninterrupted high-quality communication services.
By changing the shape of the IRS, a larger adaptive shape gain can be obtained and the ability of the IRS to reflect signals can be enhanced. The general procedure is to first search for the signal range and open the antenna as large as possible to collect as many signals as possible. For a cylindrical patch antenna array, its shape will change from the original plane to a cylindrical shape [20]. Then, the base station analyzes the signal received by the IRS and determines the direction of the signal to the IRS. Next, the base station instructs the IRS controller to change the shape of the IRS so that it faces the target user area.

Experimental and results
In the simulation part, the main system configuration parameters are shown in Table 1. There will be 1 IRS in each cell and the antenna configuration of IRS is a rectangular antenna array with 8 × 8 elements, IRS is deployed under UAV and the deployment height is 100 m, IRS antenna downtilt angle is 90°. Three UEs will be deployed in each cell, and each UE's antenna will be configured with 1 element, UE height is 1.5 m. Each BS has 3 cells, and each cell covers a width of 120°. BS Transmit power is 50 dBm/Cell, the antenna configuration of BS is a rectangular antenna array  Fig. 6, the three CDF curves represent the three situations where IRS is not deployed, IRS is deployed, and shaped IRS is deployed. From Fig. 6, we can see that IRS can improve the SINR of the coverage area. At the same time, because the beamforming is more flexible, shaped IRS has more advantages than IRS in improving SINR.
From Figs. 7, 8, and 9, it can be seen that the received SINR of UE has increased. This is mainly due to the existence of IRS, which adds a reflection ray to the channel. This will increase the received power of UE and improve the overall system throughput.

Conclusion
This article puts forward the concept of an integrated world network and introduces the global ground integrated network and shape-adaptive IRS antenna technology. The proposed IRS shape-adaptive antenna is made of a flexible material, the physical shape of the antenna may be changed in real time, a radiation beam is formed in accordance with the specific requirements of its function, but also demonstrated the proposed antenna shape-adaptive IRS by simulation results.