Evaluating the accuracy of genomic prediction of growth and wood traits in two Eucalyptus species and their F1 hybrids

Background Genomic prediction is a genomics assisted breeding methodology that can increase genetic gains by accelerating the breeding cycle and potentially improving the accuracy of breeding values. In this study, we use 41,304 informative SNPs genotyped in a Eucalyptus breeding population involving 90 E.grandis and 78 E.urophylla parents and their 949 F1 hybrids to develop genomic prediction models for eight phenotypic traits - basic density and pulp yield, circumference at breast height and height and tree volume scored at age three and six years. We assessed the impact of different genomic prediction methods, the composition and size of the training and validation set and the number and genomic location of SNPs on the predictive ability (PA). Results Heritabilities estimated using the realized genomic relationship matrix (GRM) were considerably higher than estimates based on the expected pedigree, mainly due to inconsistencies in the expected pedigree that were readily corrected by the GRM. Moreover, the GRM more precisely capture Mendelian sampling among related individuals, such that the genetic covariance was based on the true proportion of the genome shared between individuals. PA improved considerably when increasing the size of the training set and by enhancing relatedness to the validation set. Prediction models trained on pure species parents could not predict well in F1 hybrids, indicating that model training has to be carried out in hybrid populations if one is to predict in hybrid selection candidates. The different genomic prediction methods provided similar results for all traits, therefore either GBLUP or rrBLUP represents better compromises between computational time and prediction efficiency. Only slight improvement was observed in PA when more than 5000 SNPs were used for all traits. Using SNPs in intergenic regions provided slightly better PA than using SNPs sampled exclusively in genic regions. Conclusions The size and composition of the training set and number of SNPs used are the two most important factors for model prediction, compared to the statistical methods and the genomic location of SNPs. Furthermore, training the prediction model based on pure parental species only provide limited ability to predict traits in interspecific hybrids. Our results provide additional promising perspectives for the implementation of genomic prediction in Eucalyptus breeding programs by the selection of interspecific hybrids. Electronic supplementary material The online version of this article (doi:10.1186/s12870-017-1059-6) contains supplementary material, which is available to authorized users.


Background
Eucalyptus species and their hybrids are the most widely planted hardwoods in tropical, subtropical and temperate regions, due to their fast growth, short rotation times, wide environmental adaptability and suitability for commercial pulp and paper production [1,2]. Interspecific hybrids of E.grandis and E.urophylla, in particular, are generally superior to their parents in growth, wood quality and biotic and abiotic stresses resistance, by inheriting both the fast growth and good rooting abilities of E.grandis while by maintaining disease tolerance and wide adaptability of E.urophylla [3]. A conventional breeding cycle toward clonal selection in hybrid populations involves mating, progeny trials, a small-scale clonal trial and a second expanded clonal trial, that together typically take between 12 and 18 years [1,4]. To accelerate the genetic gain per unit time, new methods that can help shorten the breeding cycles are greatly needed.
Genomic prediction or genomic selection (GS) is one of the most recent developments in genomics-assisted methods that are aimed at improving breeding efficiency and genetic gains. Genomic prediction provides a genome-wide paradigm for marker-assisted selection (MAS) [5,6]. In GS all genome-wide markers are fitted simultaneously in a model that relies on the principle of linkage disequilibrium (LD) to capture most of the relevant variation throughout the genome, whereas MAS focuses on discrete quantitative trait loci (QTLs) that have previously been detected, usually in underpowered experiments, and thus leaving most of the phenotypic variation unaccounted for [7]. GS are generally performed in three steps: (1) genotyping and phenotyping a 'reference' or 'training population' combined with the development of genomic prediction models that allow for prediction of phenotypes from genotypes; (2) validation of the predictive models in a 'validation population' , i.e. a set of individuals that did not participate in model training; (3) application of the models to predict the genomic estimated breeding values (GEBVs) of unphenotyped individuals which are then selected according to their GEBVs [6]. GS has been successfully implemented in the breeding of livestock [7,8] and crops [9,10] and several recent papers have also exemplified its great potential in forest tree breeding [11,12].
The accuracies of genomic prediction models vary depending on the statistical methods employed. Several methods have been developed for GS, including ridgeregression best linear unbiased prediction (rrBLUP), genomic best linear unbiased prediction (GBLUP), BayesA, BayesB, Bayesian LASSO, BayesR and reproducing kernel Hilbert space (RKHS) regression [7,13]. These methods mainly differ in the assumptions of the distribution and variances of marker effects. For rrBLUP all loci are a priori assumed to explain an equal amount of variance and thus assumes that marker effects follow a normal distribution where all effects are shrunk to a similar and small size. [6,14] In Bayesian methods (BayesA, BayesB, Bayesian LASSO and BayesR) the genetic variance explained by the ith locus, V gi , is assumed to themselves follow a prior distribution, p(V gi ). Therefore, the variance can vary across loci, and combining the information from the prior distribution with that of the data yields an estimate of V gi [6,15]. For instance, BayesA assumes that the genetic variance follow an inverted chi-square distribution whereas Bayesian LASSO assume the genetic variance follow a double exponential distribution. The GBLUP method computes the additive genetic merits from a genomic relationship matrix and is equivalent to rrBLUP under conditions that are generally met in practice [16]. The RKHS regression model is a linear combination of the basic function provided by the reproducing kernel [17]. Recent studies have indicated that the selection of suitable statistical methods relies on the actual data at hand and the pattern of phenotypic variation in the traits of interest and with reference population used [9,18].
Beside statistical methods, other factors are known to influence the accuracy of genomic prediction models, such as the size of the training population, number of markers employed, and relatedness between the training and validation population and, by extension, to the future selection candidates. Hayes et al. [19] found that for a given effective population size (N e ), increasing the size of reference population leads to improved accuracy of genomic predictions. Closer relationship between training population and selection candidates has also been reported to lead to a higher accuracy of genomic predictions, while enlarging the genetic diversity of the training population resulted in lower accuracy [20]. A number of simulation and empirical studies have shown that increasing the number of markers may improve the predictive accuracy as N e also increased [9,[21][22][23]. However, increasing the number of markers in small N e populations provides little or no improvement on predictive accuracy [24,25].
Going one step further from previous studies in forest trees, where individuals of the same breeding generation were allocated to training and validation sets for the evaluation of genomic prediction models, in this study we used both the parental and progeny generations of E. grandis, E. urophylla and their F 1 hybrids to build prediction models using different subsets of parents and progeny for training and validation sets. A multi-species single-nucleotide polymorphism (SNP) chip containing 60,904 SNPs [26] were used to provide high-density genotyping of the two generations. Based on these data, we developed genomic prediction models for height, circumference at breast height (CBH), volume, wood basic density and pulp yield, using a number of statistical methods and compared their performance to the traditional pedigree-based prediction. Furthermore, we evaluated the impact of varying the number of SNPs and the composition and size of training and validation sets on the predictive ability (PA) of genomic prediction.

Breeding population
The breeding population in this study was obtained through controlled crossings of 86 E. urophylla and 95 E. grandis trees (G0 population) following a incomplete diallel mating design, resulting in 16

Phenotyping
For the 958 G1 samples, height, volume, and circumference at breast height (CBH) were measured at age three and six years, respectively, and wood traits (basic density and pulp yield) were measured at age five years. For the 168 G0 parents, the same traits had been measured at age seven years for E. grandis and at age five years for E. urophylla. Briefly, height was measured using a Suunto hypsometer/height meter (PM-5/1520 series) and CBH was measured with a centimetre tape at 130 cm above ground. Wood properties were estimated by employing near-infrared reflectance spectra of sawdust samples collected at breast height using a FOSS NIRSystem 5000-M and applying calibration models developed earlier by Veracel S.A.. A mixed linear model was applied to minimize the impacts of environmental and age differences on each trait.
where Y is a vector of observations of a single trait; β is a vector of fixed effects, including overall mean, experimental sites and age differences; u is a vector of random additive genetic effect of individuals with a normal distribution, u~N(0, A σ 2 u ), A is a matrix of additive genetic relationships among individuals; b is a vector of random incomplete block effect nested in each experimental site; and e is a heterogeneous random residual effect in each experimental site. X, Z and W are incidence matrices for β, u and b, respectively. The phenotypes of each trait were then corrected by subtracting variation of sites, ages and blocks effects for all individuals, and were referred to adjusted phenotypes. The adjusted phenotypic traits were used for calculating the heritability of traits and for building genomic prediction models.

Genotyping and quality control
The 168 G0 and 958 G1 populations were genotyped using the Illumina Infinium EuCHIP60K [24] that contains probes for 60,904 SNPs. EUChip60K intensity data (.idat files) were obtained through GENESEEK (Lincoln, NE, USA). SNP genotypes were called using GenomeStudio (Illumina Inc., San Diego, CA, USA) following standard genotyping and quality control procedures with no manual editing of clusters as described earlier [26]. Further quality control of the genotyped samples was performed using PLINK [27]. Nine G1 individuals with sample call rate less than 70% or inbreeding coefficients greater than one were removed for further analyses. 10,240 SNPs were excluded due to low call rates (less than 70%) and 9243 SNPs were filtered out due to monomorphism or by having minor allele frequency (MAF) less than 0.01. Finally 117 SNPs were removed because they showed strong deviations from Hardy-Weinberg equilibrium (p-value <1 × 10 −6 ).
After quality control, missing genotypes of the remaining individuals were filled in by imputation. We first tested the accuracy of imputation methods across a range of missing data (2% -30%) by artificial removing SNPs from a fraction of our genotypes. Among the available family-based and population-based methods we assessed the following programs for imputation accuracy: BEAGLE [28], fastPHASE [29], MENDEL [30], random forest, SVD Impute, k-nearest neighbors [31], BLUP A matrix, Bayesian PCA, NIPALS, Probabilistic PCA [32]. BEAGLE provided the best accuracy for all missing data percentages, with accuracies exceeding 95% in all cases (Additional file 1). We therefore used BEA-GLE to impute missing genotypes at 41,304 SNPs retained after the filtering steps discussed above, across all 168 G0 and 949 G1 individuals. The imputed genotype data was subsequently used in all genomic prediction analyses. LD between SNP pairs were measured using the squared correlation coefficient (r 2 ) for SNPs located on the same chromosome. Following Remington et al. [33], the decay of LD versus physical distance was then modelled using a nonlinear regression method.
We further estimated population structure and pairwise genomic relationships among the 1117 individuals by performing principal components analysis (PCA) [34] and by calculating genomic relationships among individuals [14] using 10,213 independent SNPs (LD-pruned) (r 2 < 0.2) calculated in PLINK [27]. Pedigree-based genetic relationship was estimated by using ABLUP in ASReml (see below for further information).

Statistical methods for genomic prediction
Four statistical methods were assessed for their ability to estimate the parameters in eq. (1) and for predicting GEBVs. These methods include genomic best linear unbiased predictor (GBLUP) [5], ridge regression BLUP (rrBLUP) [6], Bayesian LASSO (BL) [35], and reproducing kernel Hilbert space (RKHS) regression [17]. These methods were chosen to represent the variety of available approaches for genomic prediction. GBLUP represents a method which does not rely on marker effect estimation; rrBLUP estimates marker effects using linear and penalized parameters; BL represents a linear, parametric and Bayesian method for marker effect estimation; whereas RKHS represents a non-linear semi-parametric method. The performance of the four genomic prediction methods was compared with that of the commonly used pedigree-based BLUP (ABLUP) [36].
The GEBVs were estimated using the following mixed linear model: where y is the vector of adjusted phenotypes of single trait, β is the vector of overall mean fitted as a fixed effect, a is the vector of random effects, and e is the vector of random residual effects. 1 and Z are incident matrix of β and a, respectively.

ABLUP
ABLUP is the standard method for predicting breeding values using the expected relatedness among individuals based on pedigree information [36]. For ABLUP, the vector of random additive effects (a) in Eq. (1) is assumed to follow a normal distribution a e N 0; Aσ 2 a À Á , where A is the additive numerator relationship matrix estimated from pedigree information and the σ 2 a is the additive genetic variance. The residual vector e is assumed as e e N 0; Iσ 2 e À Á , where I is the identity matrix. Under these assumptions, Eq. (1) can be re-written as: where σ 2 e and σ 2 a are estimated using a restricted maximum likelihood method. The estimated breeding values (â ) and fixed effects (β ) can be calculated directly from Eq. (2). ABLUP calculations were performed using ASReml 3.0 [37].

GBLUP
The GBLUP method is derived from ABLUP, but differs in that the matrix A in Eq. (2) is replaced with the genomic relationship matrix (G) that is calculated from where M is the matrix of samples with SNPs encoded as 0, 1, 2 (i.e. the number of minor alleles), P is the matrix of allele frequencies with the j-th column given by 2(p j − 0.5), where p j is the observed allele frequency of the samples [5]. In GBLUP, the random additive effects (a) in the Eq. (1) is assumed to follow a e N 0; Gσ 2 g , where σ 2 g is the genomic-based genetic variance and GEBVs (â ) are again calculated from equation (2) but with A −1 replaced by G −1 and σ 2 a replaced by σ 2 g . The GBLUP calculations were performed using ASReml 3.0 [37] and the G matrix was estimated using the "A.mat" function from the rrBLUP package in R [14].
rrBLUP As opposed to the previous two methods, rrBLUP alters the notations of parameters a and Z in the Eq. (1), where Z now refers to a design matrix for SNP effects, rather than an incident matrix and a refers to SNP effects that are assumed to follow a e N 0; Iσ 2 m À Á , where σ 2 m denotes the proportion of the genetic variance contributed by each SNP [6]. With these alterations, Eq. (2) becomes: where λ ¼ σ 2 e =σ 2 u is the ratio between the residual and marker variances. A prediction for the GEBV for each individual is calculated asĝ i ¼ Z T iâ from equation (3), where Z T i is the SNP vector for individual i andâ is the vector of estimated SNP effects. All calculations were performed using the "mixed.solve" function from the rrBLUP package in R [14].

Bayesian LASSO
The Bayesian LASSO (BL) method is the Bayesian treatment of LASSO regression as proposed by Legarra et al. [34]. In BL the vector of SNP effects, a in equation (1), is assumed to follow a hierarchical prior distribution with a e N 0; Tσ 2 is assigned as λ 2~G amma(r, δ). The residual variance σ 2 e is assigned as σ 2 e e χ −2 df e ; S e ð Þ. We implemented the BL method using the "BLR" function from the BLR package in R [38]. Here a Monte Carlo Markov Chains sampler was applied and prior parameters (df e , S e , r , δ , and λ 2 ) were defined following the guidelines proposed by de los Campos et al. [39]. The chain length was 20,000 iterations, with the first 2000 excluded as burn-in and with a subsequent thinning interval of 100.

RKHS assumes that the random additive effects in
, where K is computed by means of a Gaussian kernel that is given by K ij = exp(−hd ij ) [17]. h is a semi-parameter that controls how fast the prior covariance function declines as genetic distance increase and d ij is the genetic distance between two samples computed as d ij ¼ P p k¼1 x ik −x jk À Á 2 , where x ik and x jk are kth SNPs (k = 1,…,p) for the ith and jth samples, respectively. We implemented the RKHS method through the "BGLR" function from the BGLR package in R [40], which use a Gibbs sampler for the Bayesian framework and assigns the prior distribution of σ 2 g and σ 2 e as σ 2 g e χ −2 df g ; S g and σ 2 e e χ −2 df e ; S e ð Þ, respectively. Here we chose a multi-kernel model as suggested by Perez [40], where three h values were defined as The Gibbs chain length was 20,000 iterations with the first 2000 iterations discarded as burn-in and a thinning interval set to 100.

Heritability estimation
We estimated the pedigree-based narrow-sense heritability ( h 2 a ) using the relationship matrix from the ABLUP method, and the narrow-sense genomic heritability (h 2 g ) using the genomic relationship matrix from GBLUP (details in [41]). The respective heritabilities were calculated as: where σ 2 a is the additive variance estimated from ABLUP, while σ 2 g is the marker-based genetic variance estimated from GBLUP. σ 2 y is the phenotypic variance of the population.

Size and genetic composition of the training and validation sets
We simultaneously assessed the impact of the size and genetic participation of G0 and G1 individuals in the training set (TS) and validation set (VS) of the genomic prediction models. Regarding relative TS/VS sizes, we divided all 1117 (G0 and G1) individuals into five different size groups with a TS:VS ratio of 1:1, 2:1, 3:1, 4:1 or 9:1. The corresponding sizes of the TS/VS were respectively 558/559, 743/374, 836/281, 892/225 and 1003/114 individuals. Within these pre-established size compositions, four scenarios were employed where the participation of G0 and G1 individuals were evaluated to assess the impact of varying the degrees of relationship and diversity between TS and VS. In the first scenario (CV 1 ) assignment of individuals to either TS or VS was random. For the second scenario (CV 2 ) all G0 parents were assigned to the TS and complemented with a random selection of G1 individuals up to the required number in the set, while the VS was composed exclusively of the remaining G1 individuals. The third (CV 3 ) and fourth (CV 4 ) scenarios were built based on minimizing and maximizing relatedness between TS and VS. The relatedness-based assignment of individuals was determined using the procedure described in Spindel et al. [9]. Briefly, 1117 individuals were assigned to 182 clusters based on their genotypes using a k-means clustering algorithm implemented in the "pamk" function from the fpc package in R. This method attempts to minimize the distance between individuals in a cluster and the centre of that cluster. Using the relatedness estimates, CV 3 was then built by assigning individuals to TS and VS based on dissimilarity, such that individuals from the same cluster were not allowed to be both in the same TS or VS. For CV 4 individuals from same cluster were forced to be either in the TS or VS to increase relatedness within TS and VS [9].

Genomic prediction models
We evaluated the effects of the five statistical methods (GBLUP, rrBLUP, BL, RKHS and ABLUP), five TS/VS sizes and four TS/VS composition scenarios (5*5*4 = 100 models in total) on the predictive ability (PA) of genomic prediction. For each of the 100 models, 200 replicate runs were carried out for each trait and the performance of the models were evaluated in terms of their PA (r y,ĝ ), which is defined as the Pearson correlation between the adjusted phenotypes and the GEBVs of the samples in the VS. ANOVA was performed with all effects declared as fixed on 80 out of the 100 models tested (the 20 ABLUP models were excluded) to partition the total variance into different sources (genomic prediction method, TS/VS size and genetic composition). The significant differences we found were further assessed by means of a paired t tests (α = 5%), adjusted by a Bonferroni correction. The 80 models, as described above, were used for assessing the impact of TS/VS composition and TS/VS size, while all 100 models were used to evaluate the statistical methods against ABLUP. All available SNPs were used in all the analyses of these models. SNPs. The location and classification of each SNP was obtained by mapping SNPs onto the E.grandis genome using SnpEff [42]. Genomic prediction models were built for all four TS/VS compositions using only the two statistical methods (GBLUP and RKHS) that showed the best predictive performance in the previous analyses, using a TS/VS size ratio of 4:1 (892/224).

Phenotypic trait correlations
Growth (height, volume, and CBH) and wood properties (basic density and pulp yield) were measured for all 168 G0 and 949 G1 individuals. The raw phenotypic data were adjusted using a mixed linear model to minimize the impacts of environment and age differences. The pairwise correlations between the adjusted traits were described by calculating Pearson correlation coefficients (Fig. 1). Growth traits were correlated with each other. Interestingly, however, while CBH and volume at age three and six years were highly correlated (r = 0.92 and 0.95 respectively), height at age three was only weakly correlated with height at age 6 (r = 0.36). For wood properties traits, basic density was negatively correlated with pulp yield, although only weakly so (r = −0.28). Growth traits showed no correlations with wood traits (r = − 0.1 to 0.1).

Breeding population structure and relatedness
Population structure across G0 and G1 individuals was assessed by PCA based on 10,213 LD-pruned, independent SNPs (r 2 < 0.2). The first two PCs explained 6.07% and 3.8% of the total genetic variance (Fig. 2a) and clearly separated the G0 individuals of the two species, E.grandis and E.urophylla, with the E.grandis individuals further subdivided into two subgroups likely representing the two main provenances used in breeding programs in Brazil. The G1 individuals were generally projected into the space defined by their parents, but with a few outliers. The expected pedigree-based and realized genomic-based genomic relationships among G0 and G1 individuals were visualized using heatmaps (blue and red in Fig. 2b, respectively). The result of the genomic relationship analysis corroborated the PCA result, in which E. urophylla was clustered into a single group, whereas E. grandis formed two subgroups. The average values of the realized genomic relationships among what were considered to be full-sibs, half-sibs and unrelated individuals from the pedigree data were generally lower than the expected relationships values (0.309 vs. 0.5, 0.131 vs. 0.25 and 0.0056 vs. 0, respectively) ( Table 1). This result suggests that pedigree errors were likely present in this population. These putative pedigree errors in turn negatively affected our ability to estimate the heritability of traits based on pedigree information, which were considerably lower than those estimated using genomic-based realized genetic relationships (Table 2).

Predictive abilities with different statistical methods
Estimates of PAs were obtained using different statistical methods, compositions and sizes of TS/VS for each trait (Additional file 2). An ANOVA showed that all these factors had a significant effect on the PA (P-value <0.005) (Additional file 3). Across the four genomic prediction methods used (GBLUP, rrBLUP, BL, and RKHS) the average PA varied from 0.27 to 0.274 (Additional file 4). All the four methods outperformed the pedigreebased ABLUP prediction (mean PA = 0.121) by an average of 80%-200% across the eight traits (Fig. 3). RKHS yielded a slightly better PAs for six out of eight traits and this method was particularly suitable for predicting traits that displayed lower heritabilities, such as CBH and height. The other three methods generally gave similar results across all traits, although with a slightly better performance than RKHS for pulp yield (Fig. 3).

Impact of TS/VS compositions and relative sizes on predictive ability
The average PAs differed significantly for the different TS/VS compositions tested and varied from 0.253 to 0.286 (Additional file 5). The genomic prediction model built with CV 2 (all G0 parents in the TS) showed the highest PAs for all traits except pulp yield, whereas models based on CV 3 (minimum relatedness between TS and VS) gave the worst predictions. The models based on CV 1 (random assignment) and CV 4 (maximum relatedness between TS and VS) showed no significant differences in PA (Fig. 4, Additional file 5). The average PA was significantly improved from 0.251 to 0.285, as the TS/VS ratio increased from 1:1 (558/559) to 9:1 (1003/113) (Additional file 6), irrespective of the prediction method (Fig. 3) or the genetic composition of TS/VS used (Fig. 4), clearly showing the importance of an adequate size of the training set to build prediction models. Furthermore, there was a steeper increase in PA when TS/VS ratio increased from 1:1 (558/559) to 2:1 (743/374) than from 2:1 (743/374) to 9:1 (1003/ 114) for all traits (Figs. 3 and 4).

Impact of the number of SNPs and their genomic location on predictive ability
Estimates of PA using different numbers of SNPs (Additional file 7) and subsets of SNPs in different genomic locations (Additional file 8) were obtained with two prediction methods, using a TS/VS ratio of 892/225 and using all the four different TS/VS compositions. An ANOVA showed that both the number of SNPs and their genomic location significantly affect the PA for both prediction methods (GBLUP and RKHS) (P-value <0.005), and that the number of SNPs has a larger impact than their genomic location (Additional file 9). The average PAs across all traits decreased from 0.278 to 0.113 when the number of SNPs used in the prediction models dropped from 41,304 to only 10, and the reduction was especially strong when the number of SNPs went below 5000 (Additional file 10). On the other hand, no significant improvement was generally seen in the average of PA when more than 5000 SNPs were used (Additional file 10, Fig. 5). The results obtained for the different traits suggest that traits with lower heritability are more sensitive to the reduction in the number of SNPs (Fig. 5). For instance, PA for basic density (h 2 = 0.35) went from 0.47 to 0.24 (a 50% decrease) when the number of SNPs dropped from 40,000 to 10, whereas CBH of age three (h 2 = 0.113) decreased from 0.128 to 0.03 (a 77% decrease). Overall, slight significant differences were seen in PAs by using SNP sets located in different genomic regions (Fig. 6), the average PAs range from 0.270 to 0.284 (Additional file 11). Predictions using SNPs located in intergenic regions were marginally better than using SNPs in genic regions or all SNPs, except for pulp yield that could be better predicted based on models using SNPs from coding and gene regions (Fig. 6). When comparing the PA of models using SNPs in coding versus entire gene regions, the latter had a slightly better performance, most likely due to the larger number of SNPs used (30,504 vs. 11,786) and not due to any specific effect of genomic location. When we assessed the pairwise LD (r 2 ) among SNPs in the four regions tested, the extent of LD differed among them, with LD showing the most rapid decay in coding regions and the slowest decay in intergenic regions (Additional file 12).

Discussion
This study presents the results of an empirical evaluation of the accuracy of genomic prediction on growth and wood quality traits in Eucalyptus using data from a high-density SNP array. Our results are based on data from a two generations breeding population and provide additional encouraging results on the prospects of using genomic prediction to accelerate breeding. We have assessed a range of factors, including the statistical methods used to estimate predictive ability, the size and composition of the training and validation sets as well as the number and genomic locations of SNPs used in the prediction model. Hereafter we will discuss how these factors influenced the prediction accuracy.

Genomic data corrected pedigree inconsistencies
All four genomic prediction methods performed significantly better than the pedigree-based evaluations for all complex traits assessed (Fig. 3). While similar results have been reported for animals [18,43] and crop species [9,36] across a number of traits, in forest trees prediction accuracies using genomic data have generally been similar or up to 10-30% lower than accuracies obtained using pedigree-estimated breeding values, including Eucalyptus [4], loblolly pine (Pinus taeda) [44], white spruce (Picea glauca) [45,46], interior spruce (Picea engelmannii × glauca) [47,48] and maritime pine (Pinus pinaster) [49]. Genomic predictions with lower accuracies than pedigree-based predictions could arise from insufficient marker density, such that not all casual variants are captured in the genomic estimate [41], or an overestimate of the pedigree-based prediction due to its inability of ascertaining the true genetic relationships in half-sib families [47]. Our result however differ from previous studies in forest trees due to the fact that the  average pairwise estimates of genetic relationship among individuals were substantially lower using SNP data than expectations based on pedigree information (Table 1), clearly suggesting that the expected pedigrees, and consequently the pairwise relationships, had considerable inconsistencies that were corrected by the SNP data. We speculate that these inconsistencies likely derived from pollen contamination and/or mislabelling in the process of generating the full and half-sib families. Besides correcting potential pedigree errors, the relatively dense SNP data used in our study also was able to accurately capture the Mendelian sampling variation within families so that genetic variances estimates were based on the true proportion of the genome that is identical by descent (IBD) or state (IBS) among half-or full-sib individuals, resulting in improved estimates of trait heritability ( Table 2).

Genomic predictions show that traits adequately fit the infinitesimal model
Overall, the different genomic prediction methods provided similar results for the all traits evaluated, with only a slight advantage for RKHS which showed better PAs for the low-heritability growth traits (Fig. 3). However, for pulp yield, RKHS was instead the worst performing method, and it is possible that the definition of a kernel simply was not suitable for this particular trait [17].
Our results corroborate previous reports from both crops and animals [18,50,51], as well as forest trees.
In loblolly pine, for example, the performance of rrBLUP and three Bayesian methods were only marginally different when compared across 17 traits with distinct heritabilities, with a small improvement seen for BayesA only for fusiform rust resistance where loci of relatively larger effect have been described [44]. Similar results were obtained for growth and wood traits in other forest trees showing no performance difference between rrBLUP and Bayesian methods [46,48,49]. This occurs despite simulation studies suggesting that Bayesian methods, like BL, should outperform univariate methods such as rrBLUP and GBLUP [6,52,53]. One possible reason for the apparent disagreement between simulations and empirical data sets could be that the true QTL effects for most of traits are relatively small and the distribution is less extreme than in simulated data [54]. Our results therefore support the proposal that either rrBLUP or GBLUP are effective methods in providing the best compromise between computational time and prediction efficiency [55] and that the quantitative traits assessed in our study adequately fit the assumption of the infinitesimal model.  Training set size, composition and relatedness strongly affect predictive ability Our results show that the size and compositions of training and validation sets had the largest impact on the PA, irrespective of the analytical method used (Fig. 4). The average PA rapidly increased with increasing sizes of the TS and did not show any sign of plateauing. Earlier simulations of Eucalyptus breeding scenarios had in fact shown that with up to N = 1000 individuals in the TS, the accuracy would rapidly increase, and additional gains were seen up to N = 2000 individuals for traits with low heritabilities, for larger numbers of QTLs involved in traits and for larger effective population size (N e ). After N = 2000 the predictive accuracy would tend to plateau irrespective of the N e and genotyping density [22]. Simulations [19,56] and proof-of-concept studies [57] in crop species also show improved PA with larger TS sizes. Larger training populations alleviate the probability of losing rare favourable alleles from the breeding population as generations of selection advance. Additionally, by sampling more individuals for training, a larger diversity is captured and better estimates of the marker effects are obtained which in turn positively As expected, relatedness between TS and VS had a large impact on PAs for all traits. Prediction models built under scenario CV 3 (minimized relatedness between TS and VS) resulted in significantly worse predictions than in scenario CV 4 when relatedness was maximized. Our results are in line with previous reports in forest trees, such as white spruce [45,46] and Eucalyptus [4], where models developed for one population had limited or no ability of predicting phenotypes in unrelated populations, suggesting that prediction models are largely population specific. With a lower relationship between TS and VS, the extent of LD is shorter and not stable across distantly related individuals in populations and the predictive ability of genomic prediction model is therefore reduced. Recent simulations show that the accuracy of genomic prediction models decline approximately linearly with increasing genetic distance between training and prediction populations [58]. Increased relatedness reduce the number of independently segregating chromosome segments and therefore increase the probability that chromosome segments that are IBD and which are sampled in the training population are also represented in the selection candidates. Our results provide additional experimental evidence that for successful implementation of GS the selection candidates have to show a close genetic relationship to the training population.
PAs were considerably higher when all the G0 parents were kept in the TS (scenario CV 2 ). This result could be due to two reasons. On one hand, by keeping all G0 parents in TS, we ensure that a large genetic diversity is available for model training, which could explain the positive impact of G0 inclusion on predictions. On the other hand, it is possible that by allocating all G0 individuals to the TS the positive effect we observe is strictly not due to increased predictive power but rather because we avoid the potentially negative impact of having pure species parents in the validation set in combination with G1 progeny that were largely F 1 hybrids. In order to evaluate this, we estimated PA of genomic prediction models by using GBLUP and RKHS, having only the 168 G0 parents for TS and randomly selected 168 G1 individuals in VS. To control for the effect of the strongly reduced TS size, we compared this setup with random assignment of individuals to TS or VS but keeping the size of each at N = 168. The results showed considerably lower PAs (even zero or negative) when using only pure species parents to predict G1 hybrid progeny phenotypes (Additional file 13). This observation, together with the fact that PAs for scenario CV 4 (maximum relatedness between TS and VS) were also generally lower than CV 2 , suggest that the higher PAs we observe for scenario CV 2 is mostly due to avoiding the negative effect of having pure species parents in the VS.
The issue of genomic prediction in hybrid breeding has been investigated so far only within species and only for domestic animals, more specifically for bovine and pig breeding in which selection is carried out in pure breeds but with the aim to improve crossbred performance [43,59]. Results from simulations show that training on crossbred data provides good PAs by selecting purebred individuals for crossbred performance, although PAs drop with increasing distances between breeds [60]. When crossbred data is not available, separate purebred training populations can be used either separately or combined depending on the correlation of LD phase between the pure lines [61], which in turn is in part determined by the time of divergence between the populations. Compared to bovine breeds that belong to the same species and have diverged relatively recently (<300KYA) [62], the estimated divergence time between the two Eucalyptus species used in our study is much older, estimated at 2-5 MYA [63]. We therefore don't expect much correlation of LD phase between the two species and it is thus not surprising that training on the combined pure species sets with validation in F 1 hybrids resulted in poor PA. To the best of our knowledge, our results are the first ones to provide an initial look at the issue of genomic prediction from pure species to interspecific hybrids and our results indicate that, consistent with theoretical expectations, models have to be trained using hybrids if one is to predict phenotypes in hybrid selection candidates.

Number of SNPs is more important than SNP genomic location
Across all traits, no major improvement was detected in PA when more than 5000 SNPs were used (Additional file 10, Fig. 5), although a slight increase was observed for height of age three, basic density and pulp yield when using GBLUP based on 20,000 SNPs. Several studies have previously shown that considerably lower numbers of SNPs provided PAs equivalent to those observed using all SNPs available [24,64]. The necessary number of SNPs needed for genomic prediction model depends on the extent of LD, which is strictly dependent on N e . Our results, where we achieve equivalent PAs using either all or only 10-20% of the genotyped markers suggests that it represents a closed breeding population with a relatively modest N e . This has been a common approach in domestic animals with the intent of developing low-density genotyping chips to reduce genotyping costs [8]. The main advantage of using reduced SNP panels is cost-effectiveness, although it is expected that using a higher density of markers will be necessary to mitigate the decay of PAs over generations due to the combined effect of recombination and selection on the patterns of LD [65]. It is also questionable whether it will be more cost effective to have targeted low-density SNP chips for specific populations or a full SNP chip that can be used across breeding populations of several organizations. By having a SNP chip that will accommodate several populations the cost-effectiveness and economy of scale of amassing many more samples to be genotyped with the same chip will likely be much larger than the cost reduction observed by using a smaller number of SNPs on each specific population.
SNP location also contributed to the predictive ability of genomic prediction model although the effects were rather modest. PAs using SNPs in intergenic regions were slightly better than using SNPs in genic regions or using all SNPs, except for pulp yield that could be somewhat better predicted with SNPs in coding and gene regions (Fig. 6). This likely represents a random sampling effect and not any specific enrichment for functional variants for this trait. However, the decline of LD was slower for SNPs in intergenic regions than for SNPs in genic and/or coding regions (Additional file 12) and the slightly longer range of LD might help explain why using SNPs in intergenic regions provided better PAs. With slower LD decay, SNPs in intergenic regions might better capture QTLs across longer genomic segments than SNPs in coding regions where LD decays more rapidly.

Further issues affecting the accuracy of model prediction
Several issues remain to be investigated for successful adoption of genomic prediction in operational eucalypt breeding. First, how does the accuracy of genomic prediction decline over successive generations of selection due to the effects of recombination? Simulation studies illustrated that the prediction accuracy decline rapidly during early generations but this decline slows down in later generations [6,16]. A GS model should therefore be updated after the phenotypes of next generation individuals become available. Second, how stable are genomic prediction models across multiple environments and how important is it to consider genotype by environment interactions in the models? The interaction between genomic prediction and environmental effects will essentially follow conventional G x E strategies. Prediction models are expected to be accurate across sites within the same breeding zone (an area within which a single population of improved trees can be planted without fear of maladaptation) but not necessarily across different breeding zones [12]. Furthermore, with genomic prediction, individuals are not evaluated on the basis of their own phenotypic performance, but on the basis of genomic information across other individuals, years and environments, which given an opportunity to evaluate the effect of particular genomic segments that are shared between individuals across multiple environments. Burgueno et al. [66] showed that models incorporating pedigree and marker data on wheat lines from multiple environments can substantially enhance prediction accuracy relative to only pedigree-based prediction or relative to genomics prediction models derived from single environments. Finally, we have only considered the additive genetic variance for building genomic prediction models in our eucalypt population, but it is possible, and perhaps even likely, that non-additive genetic effects play an important role in many breeding populations and specifically in populations consisting of early generation hybrids. A recent simulation study of genomic prediction in Eucalyptus breeding reported that genomic prediction including dominance effects performed better for clone selection where as non-additive effects did not improve the estimation of breeding value for parental selection [67]. To the best of our knowledge, no experimental data exist in forest trees regarding the ability of GS to predict the total genotypic value of individual trees, including both additive and non-additive effects.

Conclusions
Our experimental results provide further promising perspectives for the implementation of genomic prediction in Eucalyptus breeding programs. Genomic prediction largely outperformed pedigree-based prediction in our experiment, mainly due to the fact that our expected pedigree had major inconsistencies, resulting in gross underestimation of all pedigree-based estimates. This rather unexpected result illustrated an additional advantage of using SNP data and genomic prediction in breeding programs. While the main advantage of genomic prediction in eucalypt breeding will likely be the reduction of the breeding cycle length [4], the use of a genomic relationship matrix allowed us to obtain precise estimates of genetic relationship and heritabilities that we would otherwise not have had access to. Furthermore, our results corroborated the key role of relatedness as a driver of PA, the potential of using lower density SNP panels, and the fact that growth and wood traits adequately fit the infinitesimal model such that either GBLUP or rrBLUP represents a good compromise between computational time and prediction efficiency. In contrast to previous studies in Eucalyptus, we had accessed to both the pure species parents (E. grandis and E. urophylla) and their F 1 progeny. We show that models trained on pure species parents do not allow for accurate prediction in F 1 hybrids, likely due to the strong genetic divergence between the two species and lack of consistent patterns of LD between the two species and their hybrids.