Skip to main content
Download PDF

Engineering of Trichoderma reesei for enhanced degradation of lignocellulosic biomass by truncation of the cellulase activator ACE3

Biotechnology for Biofuels volume 13, Article number: 62 (2020) Cite this article

Abstract

Background

The filamentous fungus Trichoderma reesei is a major workhorse employed to produce cellulase, which hydrolyzes lignocellulosic biomass for the production of cellulosic ethanol and bio-based products. However, the economic efficiency of biorefineries is still low.

Results

In this study, the truncation of cellulase activator ACE3 was identified and characterized in T. reesei classical mutant NG14 and its direct descendants for the first time. We demonstrated that the truncated ACE3 is the crucial cause of cellulase hyper-production in T. reesei NG14 branch. Replacing the native ACE3 with truncated ACE3 in other T. reesei strains remarkably improves cellulase production. By truncating ACE3, we engineered a T. reesei mutant, PC-3-7-A723, capable of producing more cellulase than other strains. In a 30-L fermenter, fed-batch fermentation with PC-3-7-A723 drastically increased the maximum cellulase titer (FPase) to 102.63 IU/mL at 240 h, which constitutes a 20–30% improvement to that of the parental strain PC-3-7.

Conclusions

This work characterized the function of truncated ACE3 and demonstrated that analysis of classical mutants allows rational engineering of mutant strains with improved cellulase production necessary to process lignocellulosic biomass. Our rational engineering strategy might be useful for enhancing the production of other bio-based products.

Background

The main product from lignocellulose degradation is glucose that is then converted into value-added products, such as ethanol [1,2,3,4], which have attracted increasing interest. Lignocellulosic biomass, which represents the most abundant sustainable resource, is a key player in the production of biofuels and bio-based chemicals in biorefineries [5]. One of the crucial steps of lignocellulosic biomass degradation is enzymatic hydrolysis, and filamentous fungi are the most successful microorganisms for producing lignocellulolytic enzymes [1]. Among these, the saprophytic filamentous fungus Trichoderma reesei (teleomorph Hypocrea jecorina) is a dominant workhorse employed for cellulase production in the biotechnology industry [6]. However, large-scale conversion of lignocellulose to products is suffering from the high cost of cellulase.

Trichoderma reesei Rut-C30, one of the best-known hyper-producers of cellulase in the public domain, was obtained through three rounds of classical mutagenesis from the wild-type QM6a (Fig. 1c) [6, 7]. First, mutagenesis using UV (ultraviolet light) followed by screening for the ability to hydrolyze cellulose led to the isolation of the M7 strain (which is no longer available). Further mutagenesis using NTG (N-nitroguanidine) led to the isolation of the hyper-producer strain NG14 that exhibited two- to fivefold increased cellulase activity compared to the QM6a parental strain [8]. Finally, the T. reesei strain Rut-C30 was obtained using another round of UV mutagenesis, followed by screening for improved cellulase activity compared to the NG14 parental strain. In addition, an RL-P37 strain was also selected from NG14 (Fig. 1c) [9]. Meanwhile, a moderately overproducing strain of cellulase (QM9414) was derived from QM6a by irradiation using a linear accelerator [7]. T. reesei strain PC-3-7 [10], derived from QM9414 through several rounds of mutagenesis, is a cellulase hyper-producing mutant that exhibits twice as much cellulase activity as QM9414 [11]. This has led to the identification of a large number of mutagenic events that contribute to the improvements of cellulase in the QM9414 and NG14 branch [5, 12,13,14]. However, most of the mutation sites are found in non-coding regions of the genome during classical mutagenesis, which makes it hard to understand their role in cellulase hyper-production. To date, the genomes of some strains have been sequenced [8, 15], thus making the organism open to targeted improvement by genetic engineering.

Fig. 1
figure 1

Native and truncated ACE3 sequences and genealogy of strains used in this study. a Native and truncated ace3 DNA sequences. Red color represents the missense mutation loci in the sequence of ace3. Blue color represents the DNA sequence of the 11 truncated amino acids. The underlines indicate the stop codons. b Native type ACE3-734 and truncated type ACE3-723. Native ACE3 is composed of 734 amino acids, and truncated ACE3-723 is composed of 723 amino acids. c Genealogy of strains used in this study. Mutagens used appear next to strain names. The gray color used for the M7 strain indicates that the strain is no longer available and was not included in this study. The number 723 denoted in red represents the strain containing truncated ACE3-723. LA Linear accelerator; UV ultraviolet light; NTG N-nitroguanidine

Full size image

Genetic engineering is a feasible strategy to increase cellulase production, for example by manipulating transcription factors (TFs) to regulate gene expression [1, 16]. The bgl2 gene encoding intracellular β-glucosidase II (BGLII/Cel1a) is mutated in PC-3-7; this mutation reduces the cellobiose metabolic rate, resulting in an indirect release from carbon catabolite repression of cellulase expression by glucose, which enhances cellulase expression [13]. The engineering of TFs involved in transcription of cellulase genes has been developed to enhance the production of cellulase in filamentous fungi [5, 17]. An artificial TF containing the carbon catabolite repression factor CRE1-binding domain linked to the cellulase essential TF XYR1 was designed, which results in constitutive cellulase production using glucose as the sole carbon source [18]. Derntl et al. [19] introduced fusion TFs consisting of the DNA-binding domain of XYR1 and the transactivation domain of YPR2 (a TF of the sorbicillinoid biosynthesis gene cluster), which yielded a highly transactivating TF that induced xylanases and cellulases near-independently from a carbon source. Wang et al. [20] designed four novel fusion TFs to release or attenuate carbon catabolite repression in cellulase transcription, which led to significant improvement of cellulase gene expression. Overall, genetic engineering could aim to optimize regulatory processes within cells to increase cellulase production.

In general, the induction of cellulase gene expression is triggered by specific inducer molecules. After recognition of the inducer, TFs are activated and bound to cellulase-encoding genes [1, 21]. Several particular mutations located in these TFs cause cellulase hyper-production in classical mutants. The CRE1 mutations in T. reesei Rut-C30 and PC-3-7, which allow the transcription of cellulase genes in glucose-containing media, resulted in higher cellulase and hemicellulase activities [7, 22, 23]. Nitta et al. [24] indicated that the mutation of BGLR (a TF that regulates β-glucosidase gene expression) in PC-3-7 elevated cellulase production during growth on cellobiose.

In 2014, another cellulase essential TF, ACE3, was identified for the first time from the transcriptional profiling data of T. reesei cultures grown in the presence of different lignocellulose-derived cellulase inducers [25]. Deletion of the ACE3 encoding gene ace3 is fatal for cellulase production and for the transcription of several cellulase genes studied, which proved ACE3 is an essential TF for cellulase [25]. We have identified the correct sequence of the native ACE3 (ACE3-734, encoding 734 amino acids) from T. reesei QM6a [26] and then elucidated its essential role in cellulase production, by observing its interaction with another essential cellulase TF, XYR1 [26].

In this study, we analyzed the genomes of the classical T. reesei mutants to find the mutations responsible for the remarkable improvement of cellulase production. We engineered a T. reesei hyper-cellulolytic mutant by integration of the crucial mutations from two T. reesei classical mutagenesis branches. Furthermore, higher FPase titer and cellulase productivity were achieved using a low-cost sugar mixture in a 30-L fermenter by fed-batch fermentation. Our study provides a rational engineering strategy to improve cellulase production, which could be further elaborated to feasibly improve cellulosic ethanol production and might benefit efficient bioconversion of other bio-based products.

Results

Identification of the mutations in TFs from T. reesei classical mutants

Engineering of TFs has been the major strategy for increasing the production of lignocellulolytic enzymes in filamentous fungi. There are many mutagenic events occurring in TFs that contribute to the improvement of cellulases in different T. reesei classical hyper-producing mutants. We scanned the never-studied mutations located in TFs for cellulase production from the genome data of classical mutagenic strains to determine whether such mutations can contribute to the improvements of cellulase or not.

The genomes of the two T. reesei strains QM6a (wild type) and Rut-C30 (classical hyper-producing mutant) have been sequenced and published before [8, 15]. By comparing the two genome data, we discovered a point mutation in the Rut-C30 ace3 gene, which results in a missense mutation (C to T, 2883 base pairs downstream of the ace3 translational initiation), then in a premature termination of translation, and in a truncated ACE3 (Fig. 1a). The final T. reesei Rut-C30 product, ACE3-723, is 11 amino acids shorter at the C-terminus (Fig. 1a and Additional file 1: Figure S1). As shown in Fig. 1b, the open reading frame (ORF) of the native ace3 encodes a protein that is composed of 734 amino acids, while the ORF of truncated ace3 encodes a protein that is composed of 723 amino acids.

To further understand the missense mutation of ace3 in T. reesei, we combined the results of sequencing data and diagnostic PCR to characterize the sequences in other classical mutants that were derived from the T. reesei wild-type QM6a, such as QM9414, PC-3-7, NG14, and RL-P37. Consequently, we discovered that the T. reesei strains NG14 and RL-P37 contained the same missense mutation in the ace3 sequence, and ACE3 was truncated to ACE3-723 in the same manner as in Rut-C30. However, in T. reesei QM9414 and PC-3-7, the ACE3 was found to be the same native ACE3-734 as that in wild-type QM6a (Fig. 1c). These results suggest that the truncation of ace3 in T. reesei Rut-C30 and RL-P37 was inherited from their parental strain, NG14. However, the T. reesei QM9414 branch carries the native ACE3-734 without any mutation, thus indicating that the sequences of ACE3 are different between the NG14 and QM9414 descendants. These results imply that the truncation of ACE3 is specific to the NG14 branch that was developed by Peterson et al. [7] and requires further investigation to better understand its biological function and significance.

To date, there are no reports on the impact of ACE3 truncation on the function of this protein. Our study is the first to report the truncated mutation of ace3 in a variety of T. reesei strains and the impact of this truncation on the biological function of ACE3 in detail.

The truncated ACE3-723 is the crucial cause of cellulase hyper-production in T. reesei NG14 branch

The identification of a truncated ACE3-723 in Rut-C30 led us to investigate whether it is involved in its cellulase hyper-production. To directly test this hypothesis, we replaced the truncated ace3-723 sequence in the T. reesei Rut-C30 with the native ace3-734 sequence from T. reesei QM6a using in situ homologous recombination, thus creating two transformants for the T. reesei Rut-C30 strain (Fig. 2a). Rut-C30-A734 transformants carried the native ACE3-734, as the test strains did, while the Rut-C30-A723 transformants carried the truncated type ACE3-723 found in Rut-C30 and were used as a positive control. All transformants were confirmed to have the correctly replaced gene, with a single-copy DNA integration only (Additional file 2; Additional file 3: Figure S2).

Fig. 2
figure 2

Construction of transformants and effects of the truncated type ACE3-723 versus the native type ACE3-734 on cellulase production of T. reesei Rut-C30. a Schematic representation of A723 and A734 transformants. LML 2.1 is the erasable hygromycin selection marker in T. reesei. A734 transformants carry the native ACE3-734 as the test strains. A723 transformants bear ACE3-723 as controls. The black square denotes the loxP site left at the C-terminus of ACE3 after the marker was excised. The primers ace3-CF and D70-4 and HG3.6 and ace3-CR were used to verify the genotype of ACE3. b, c Effects of the truncated type ACE3-723 versus the native type ACE3-734 on cellulase production of T. reesei. The pNPCase activity of T. reesei Rut-C30 and transformants was examined after culture in liquid 2× Mandels’ medium with 2% lactose (b) or 1% Avicel (c). d–f Transcription of genes encoding the major cellulase (cbh1) and essential transcription factors for cellulase (ace3 and xyr1) was evaluated. Three independent experiments with three biological replicates each were performed. The sar1 gene was used as the internal control for normalization. Values are the mean ± SD of the results from three independent experiments. Asterisks indicate a significant difference (*p < 0.05, Student’s t test)

Full size image

Next, we cultured all the strains on liquid 2× Mandels’ medium with either 2% lactose or 1% Avicel as the sole carbon source. The titer of pNPCase activity (representing cellulase activity in our study) was analyzed. As shown in Fig. 2b, c, there was no significant difference in cellulase production from the positive control (Rut-C30-A723 transformants) compared to that of parental strain Rut-C30, which can be explained by them having the same ace3-723 genotype. However, the titers of pNPCase activity were significantly reduced in the test Rut-C30-A734 transformants compared to those in the parental strain (Rut-C30) and the positive control (Rut-C30-A723 transformants). Interestingly, we found that the titer of pNPCase activity in the test Rut-C30-A734 transformants was dramatically decreased to that of the original level observed in wild-type QM6a (Fig. 2b, c). This result suggests that the complementing native ace3-734 completely blocked their hyper-production trait, which was acquired by several rounds of classical mutagenesis in a course of 30 years.

In addition, the transcriptional levels of cbh1 (encoding the major cellulase, cellobiohydrolase I in T. reesei), xyr1 (major transcriptional regulator of cellulases), and ace3 (essential cellulase activator) were also analyzed using RT-qPCR (RNA extraction and real-time reverse transcription polymerase chain reaction) in the Rut-C30 strain, in the positive control Rut-C30-A723 transformants, and in the test Rut-C30-A734 transformants grown on 1% Avicel following 48, 72, and 96 h of induction. The transcription levels of cbh1, xyr1, and ace3 in Rut-C30-A723 and Rut-C30 are similar (Fig. 2d, e), which can be explained by their common ace3-723 genotype. However, the transcription levels of cbh1, xyr1, and ace3 in the test Rut-C30-A734 were about 40-, 120-, and 40-fold lower than those in the ACE3-723 genotype strains, respectively (Fig. 2d, e). The RT-qPCR analyses of cbh1 (Fig. 2d, e) agreed with the cellulase activity analyses (Fig. 2b, c). The marked down-regulated transcription levels of xyr1 and ace3 in Rut-C30-A734 (Fig. 2d, e) could explain its significantly scarcer cellulase production (Fig. 2b, c). Hence, results strongly support the thesis that the truncated type ACE3-723 is the crucial cause for cellulase hyper-production in Rut-C30.

To further investigate whether the truncated ACE3-723 in T. reesei NG14 and RL-P37 is also involved in the hyper-production of cellulase like in the Rut-C30 strain, we replaced the truncated ace3-723 sequence in the T. reesei NG14 and RL-P37 with the native ace3-734 sequence from T. reesei QM6a using in situ homologous recombination; this resulted in two transformants, NG14-A734 and RL-P37-A734, designed to carry the native ACE3-734 and be the test strains for NG14 and RL-P37, respectively. The NG14-A723 and RL-P37-A723 transformants possessed the same ACE3-723 proteins as their parental strains NG14 and RL-P37, which were used as their positive controls, respectively.

The titer of pNPCase activity was analyzed. As shown in Fig. 3, there was no significant difference in cellulase production in the positive controls (NG14-A723 and RL-P37-A723 transformants) compared to parental strains (NG14 and RL-P37, respectively), which can be explained by the common genotype held by each pair of parental and positive control strain. However, the titers of pNPCase activity were significantly reduced in the test NG14-A734 and RL-P37-A734 transformants compared to those in parental stains (NG14 and RL-P37, respectively) and positive controls (NG14-A723 and RL-P37-A723 transformants, respectively). Similar to Rut-C30-A734 transformants, the titer of pNPCase activity in NG14-A734 and RL-P37-A734 transformants was dramatically decreased to that of the original level observed in wild-type QM6a (Fig. 3). The transcriptional levels of cbh1, xyr1, and ace3 were also analyzed using RT-qPCR in the NG14 group (NG14, NG14-A723, and NG14-A734) and RL-P37 group (RL-P37, RL-P37-A723, and RL-P37-A734) (Additional file 4: Figure S3), and resulted similar to those of the Rut-C30 group (Rut-C30, Rut-C30-A723, and Rut-C30-A734). This result is completely consistent with that of Rut-C30, and indicates that the truncated type ACE3-723 is the crucial cause of the cellulase hyper-production in NG14 and its descendants Rut-C30 and RL-P37 (Fig. 1c). We may speculate that if 50 years ago the classic random mutagenesis had not caused this missense mutation in the ace3 sequence, the NG14 would have been discarded as a low-yield cellulase-producing strain, and hence its descendants Rut-C30 and RL-P37 would not exist.

Fig. 3
figure 3

Effects of the truncated type ACE3-723 versus the native type ACE3-734 on cellulase production of T. reesei NG14 and RL-P37. The pNPCase activity of T. reesei NG14 (a, b) and RL-P37 (c, d) was examined after culture in liquid 2× Mandels’ medium with 2% lactose (a, c) or 1% Avicel (b, d). Values are the mean ± SD of results from three independent experiments. Asterisks indicate a significant difference (*p < 0.05, Student’s t test)

Full size image

Engineered PC-3-7-A723 produces more cellulase than other T. reesei strains

The results documented in Figs. 2 and 3 suggest that the truncation of 11 amino acids at the C-terminus of ACE3-734 is the crucial cause of the cellulase hyper-production in NG14 and its descendants Rut-C30 and RL-P37. We sought to determine whether rational genetic engineering could improve cellulase production by integration of this crucial mutation into the T. reesei strains QM6a, QM9414, and PC-3-7, which still contain native ace3-734. To study this, we replaced the native ace3-734 sequence in T. reesei QM6a, QM9414, and PC-3-7 with a truncated ace3-723 sequence from T. reesei Rut-C30 by in situ homologous recombination, engineering in two kinds of transformants for each strain (see Additional file 5: Figure S4A). The A723 transformants carried the truncated ACE3-723 as the test strains. The A734 transformants carried the native ACE3-734 sequence like the parental strains, which were used as the positive controls.

There was no significant difference in cellulase production in positive controls QM6a-A734, QM9414-A734, and PC-3-7-A734 transformants compared to the parental strains, QM6a, QM9414, and PC-3-7, respectively (Fig. 4a–e), which can be explained by the common ace-734 genotype of each strain pair. However, the titers of pNPCase activity were significantly improved in the test QM6a-A723, QM9414-A723, and PC-3-7-A723 transformants compared to those in the parental stains (QM6a, QM9414, and PC-3-7, respectively) and in the positive controls (QM6a-A734, QM9414-A734, and PC-3-7-A734 transformants, respectively). Interestingly, the titer of pNPCase activity in QM9414-A723 transformants was higher than that observed in Rut-C30, one of the best-known industrial hyper-producers of cellulase. This result suggested that the truncation of ACE3 converts the moderate producer T. reesei QM9414 to a hyper-producer of cellulase. The PC-3-7 transformants grew poorly on lactose as the sole source of carbon and pNPCase activity could only be detected on Avicel. Cellulase production was significantly improved in the engineered strain PC-3-7-A723 culture, about 124% higher than the parent strain PC-3-7 production. The PC-3-7-A723 transformants showed a pNPCase activity of approximately 4.14 ± 0.02 U/mL in flasks, which is the highest activity that has been achieved to date. This result showed that artificially truncating 11 amino acids at the C-terminus of ACE3-734 could also enhance cellulase production in QM6a, QM9414, and PC-3-7, just simulating the classical mutagenesis caused by the missense mutation in NG14.

Fig. 4
figure 4

Effects of the truncated type ACE3-723 versus the native type ACE3-734 on cellulase production in T. reesei QM6a, QM9414, and PC-3-7. The pNPCase activity of T. reesei QM6a (a, b), QM9414 (c, d), and PC-3-7 (e) was examined after culture in liquid 2× Mandels’ medium with 2% lactose (a, c) or 1% Avicel (b, d, e). Values are the mean ± SD of the results from three independent experiments. Asterisks indicate a significant difference (*p < 0.05, Student’s t test)

Full size image

In addition, the transcriptional levels of cbh1, xyr1, and ace3 were also analyzed using RT-qPCR in the QM6a group (parental strain QM6a, positive control QM6a-A734, and test QM6a-A723), in the QM9414 group (parental strain QM9414, positive control QM9414-A734, and test QM9414-A723), and in the PC-3-7 group (parental strain PC-3-7, positive control PC-3-7, and test PC-3-7) (Additional file 5: Figure S4). The transcription levels of cbh1, xyr1, and ace3 in each pair (parental and positive control strains) are similar, probably due to their common ace3-734 genotype. However, the transcription levels of cbh1, xyr1, and ace3 in the test strains were about 20% and 100% higher than in the parental and positive control strains, respectively. The RT-qPCR analyses of cbh1 agreed with the cellulase activity analyses (Fig. 3a–e). The slightly up-regulated transcription levels of xyr1 and ace3 in the test strains (Additional file 5: Figure S4) can partly explain its increased cellulase production. Hence, it can be confirmed that the truncated type ACE3-723 is a feasible strategy to enhance cellulase production in T. reesei.

Saccharification activity of crude cellulase from the PC-3-7-A723 transformant was first evaluated by testing its biomass saccharification ability against pretreated corn stover, using PC-3-7 and Rut-C30 as controls. The crude enzyme from the PC-3-7-A723 fermentation broth produced much more glucose than that from PC-3-7 and Rut-C30 with the same broth volume loading. After 72 h of saccharification, glucose yields of 82.48%, 60.51%, and 15.41% were achieved for cellulase from PC-3-7-A723, PC-3-7, and Rut-C30, respectively (Table 1 and Additional file 6: Figure S5). In the engineered strain PC-3-7-A723, the glucose hydrolyzed by the crude enzyme was 435% and 36% higher than in the Rut-C30 and the parent PC-3-7 strains, respectively. These results indicate that the cellulase production in PC-3-7-A723 is much better than in other strains (Table 1 and Additional file 6: Figure S5) under the same cultivating conditions, time, and material cost. Taken together, these results suggest that our engineering strategy is a useful and efficient approach to further improve cellulase production.

Table 1 Cellulase activities and saccharification of corn stover with same enzyme loading
Full size table

Engineered PC-3-7-A723 ferments cellulase

To further investigate the potential for industrial applications of engineered PC-3-7-A723, its cellulase production was analyzed in a 30-L fermenter. Figure 5 and Additional file 7: Table S1 illustrate the time-course of fed-batch culture using a mixture of glucose and β-disaccharides (MGDS; SUNSON®, Beijing, China) as the carbon source. For PC-3-7-A723, 60.8 g/L of PC-3-7-A723 biomass was obtained at 120 h, and maximum FPase activity was reached (102.63 IU/mL) at 240 h. During the fermentation process, the CMCase, pNPCase, pNPGase, and FPase activities of PC-3-7-A723 increased faster than those of PC-3-7. An increase of about 20–30% cellulase production was observed between the truncated strain PC-3-7-A723 and parental strain PC-3-7 after a 10-da cultivation (Additional file 7: Table S1). These results indicated that engineered PC-3-7-A723 is an effective strain for large-scale cellulase production and that the truncation of ACE3 is a useful strategy to increase the cellulase production.

Fig. 5
figure 5

Time-course of the fed-batch culture of T. reesei PC-3-7-A723 for cellulase production in a 30-L fermenter. Fermentation was started with MGDS feeding. The samples were taken at regular intervals, and the supernatant was analyzed for the FPase, pNPCase, pNPGase, and CMCase activities. Mycelia were collected for biomass measurement. Values are the mean ± SD of results from three triplicate measurements

Full size image

These may be the first tests for the potential value of engineered PC-3-7-A723 as a strain for industrial-scale cellulase production.

Discussion

Two different branches of T. reesei mutant strains were generated via classical mutagenesis techniques [6, 8]. Many mutations with essential roles in cellulase hyper-production still need to be identified. Several reports have identified some mutagenic events by comparative genomic screening, especially in known TFs, which provided a better understanding of the regulation in such hyper-producers of cellulase and have resulted in the construction of more efficient cellulase-producing strains through genetic engineering [5, 13, 14].

In T. reesei Rut-C30, three mutations have been well studied: one is a truncation in the cre1 gene, which renders this strain carbon catabolite depressed [23]; another mutation leads to a frameshift mutation in the glycoprotein processing β-glucosidase II encoding gene [27]; the last mutation lacks a 83-kb (29 gene-encoding in the scaffold 15) region [28]. Interestingly, Rut-C30 and PC-3-7 strains, which originate from two mutation branches, possess the mutated CRE1 [6, 22]. It is suggested that the mutation in CRE1 is common in such high cellulase-secreting mutants and corresponds with a partial release from carbon catabolite repression. Mello-de-Sousa et al. [23] indicated that the truncated CRE1 contributes more to the Rut-C30 phenotype than the deletion of 29 genes encoded in the scaffold 15. But lack of the full version of CRE1 in Rut-C30 does not completely explain its hyper-production of cellulase [26]. The exact cause of enhanced cellulase production in Rut-C30 is still unclear. Our study analyzed a specific mutation of ace3 in Rut-C30. Replacing the truncated ACE3-723 with the native ACE3-734 in T. reesei Rut-C30 completely blocked its cellulase hyper-production. These results suggested that the truncation of ACE3 may be much more relevant than the truncation of CRE1 for the cellulase hyper-production in T. reesei Rut-C30.

Rut-C30 inherits the truncated ACE3-723 from its parental strain NG14 (Fig. 1). While the M7 strain is now lost and we cannot trace the history of ACE3-723 further, the NG14 mutation branch does bear this truncation. This is the crucial cause of the cellulase hyper-production in NG14 and its descendants Rut-C30 and RL-P37 (Fig. 1c). We can imagine that the truncated ACE3-723 made NG14 competitive, thus promoting its selection as a cellulase hyper-producer 50 years ago. Our study also indicates that our approach is an effective strategy for identifying functional mutations by scanning the mutations located in TFs from the classical mutants.

In this study, we found that the transcription levels of xyr1 and ace3 in T. reesei strains with the truncated ACE3-723 were higher than those that had the native ACE3-734 (Fig. 2e, f, Additional file 4: Figure S3 and Additional file 5: Figure S4). These results showed that truncation of ace3 leads to the overexpression of xyr1 and ace3, and this subsequently enhances cellulase production in T. reesei [25, 29, 30]. The slight overexpression of xyr1 and ace3 can explain the higher cellulase expression in QM6a-A723, QM9414-A723, and PC-3-7-A723 compared to QM6a, QM9414, and PC-3-7, respectively. But how does a truncated ACE3-723 improve the transcription of xyr1 and its own? Our previous study showed that ace3 induces cellulase expression by interacting with XYR1, also examining which domains in ACE3 and XYR1 proteins interact with each other with a yeast 2-hybrid screening (Y2H) [26]. In this study, we found that the 11 absent amino acids in ACE3-723 are located in the protein–protein interaction domain of ACE3; this truncation may thus promote its interactions with XYR1 and indirectly enhance the transcription levels of ace3, xyr1, and cellulase-related genes, which needs further investigation. The mechanism underlying the ace3 truncation is very impactful. But, how to explain the NG14-A734 group total loss of productivity after complementing the 11 amino acids (Fig. 3)? We hypothesize a loss of function resulting in the inability of the NG14-A734 group to sustain an increased cellulase production. We intend to construct more artificial ACE3 truncation variants to study their effect on cellulase and to identify other proteins able to interact with ACE3. This may result in an explanation to the underlying mechanism of cellulase induction by ACE3.

Meanwhile, two specific mutations of the PC-3-7 bgl2 and bglr genes were proven to enhance cellulase expression [13, 24]. These functional mutations originated from classical random mutagenesis by scanning the overproducing mutants for improved cellulase production. We integrated these crucial mutations to generate improved cellulase production mutant strains by rational engineering in PC-3-7-A723 (Fig. 6).

Fig. 6
figure 6

Schematic diagrams for producing cellulosic ethanol by genetic engineering of filamentous fungi T. reesei PC-3-7-A723. The truncated type ACE3-723 is transformed into T. reesei PC-3-7 to generate the engineered cellulase hyper-producer PC-3-7-A723. The truncated ACE3-723 induces cellulase expression by interacting with XYR1. PC-3-7-A723 inherits the classical mutation sites in CRE1 (releasing CCR to enhance cellulase gene expression) [22], BGLR (decreasing β-glucosidase gene expression and increasing cellulase gene expression) [24], and BGL2 (promoting the conversion of cellobiose to sophorose to induce cellulase gene expression) [13] from PC–3–7, which contribute to the improvements of cellulase. We integrated these crucial mutations in PC-3-7-A723 by rational engineering to promote the cellulase production for cellulosic ethanol

Full size image

Taken together, our results indicate that integrating the crucial genetic changes induced by classical mutagenesis is an effective strategy to easily and rapidly improve cellulase production. Our study also suggests that a similar ACE3-723 truncation may increase cellulase production in other Trichoderma species, too. Classical mutagenesis and screening have been widely employed in industry to obtain overproducing mutants for value-added products. Identifying the positive mutations and integrating them by rational genetic engineering may be useful for enhancing the production of other industrially important metabolites.

Conclusions

In this study, we analyzed some classical mutants to plan rational engineering aimed to generate of mutant strains with improved speed and ease of production of cellulase and cellulosic ethanol. First, we identified the mutations occurring in the coding regions of TFs by scanning the genome data of hyper-productive mutants originated by classical mutagenesis. Then, we characterized these mutations to identify those crucial for the production of certain metabolites from the cells. Last, we integrated these crucial mutations to improve mutant strains by rational engineering to promote the cellular production of these metabolites.

Methods

Strains and growth conditions

Escherichia coli DH5α was used for plasmid amplification. T. reesei Rut-C30 (ATCC 56765), NG14 (ATCC 56767), and PC-3-7 (ATCC 66589) were purchased from ATCC (American type culture collection). T. reesei strain QM6a (ATCC 13631), QM9414 (ATCC 26921), and RL-P37 (NRRL 15709) were respectively purchased from DSMZ (Deutsche Sammlung von Mikroorganismen und Zellkulturen), Institute of Microbiology-Chinese Academy of Sciences, and NRRL (Agriculture Research Service Culture Collection). E. coli was cultured in Luria broth (LB) medium. All the strains of T. reesei were cultivated at 28 °C (200 rpm) in 2× Mandels’ medium (1.0 g/L yeast extract, 3 g/L peptone, 0.6 g/L urea, 2.8 g/L (NH4)2SO4, 4.0 g/L KH2PO4, 0.5 g/L CaCl2, 0.6 g/L MgSO4∙7H2O, 5 mg/L FeSO4∙7H2O, 1.6 mg/L MnSO4∙4H2O, 1.4 mg/L ZnSO4∙7H2O, and 20 mg/L CoCl2∙6H2O) in which 2% glucose, 2% lactose, or 1% (w/v) Avicel was used as carbon source [31]. In addition, all these strains were maintained on potato dextrose agar (PDA) plates at 28 °C for the generation of conidia.

Plasmid construction, Agrobacterium-mediated transformation, and transformants screening

The primers used in this study are listed in Additional file 8: Table S2. LML2.1 [32] was used as a skeleton for the two plasmids, plasmidA734 and plasmidA723, to obtain two types of transformants bearing the ACE3-734 and ACE3-723 protein, respectively. The 5′- and 3′-arms of the homology double exchange for ACE3-734 and ACE3-723 sequences were constructed as described by Zhang et al. [26]. The DNA fragment of the 5′-arm of truncated ACE3-723 (approximately 900 bp) was cloned using the genome of Rut-C30 and the primer pair ace3-1/ace3-2723. Similarly, the fragment of the 5′-arm of native ACE3-734 (approximately 1000 bp) was cloned using the QM6a genome and the primer pair ace3-1/ace3-2734. The 3′-arms of these structures (about 1000 bp) were amplified from Rut-C30 or QM6a genomic DNA using the primer pair ace3-3/ace3-4. KOD-Plus-Neo (TOYOBO, Japan) was used for PCR. Next, the 5′- and 3′-arms of ACE3-723 and ACE3-734 were ligated in an orderly manner into PacI/XbaI and SwaI sites of linearized LML2.1 [32] to form PlasmidA723 and PlasmidA734, respectively. The transformation experiments were performed using Agrobacterium-mediated transformation as described by Zhang et al. [32]. Correct intermediate transformants of A723 and A734, obtained by a homologous double exchange, were checked by diagnostic PCR [33] and quantitative PCR (qPCR; Additional file 2) [34,35,36] to avoid unspecific locus integration (ectopic integration events). The primer pairs ace3-CF/D70-4 and HG3.6/ace3-CR were used in diagnostic PCR (Additional file 3: Figure S2A-B), which was followed by DNA sequencing (Additional file 3: Figure S2E) to confirm the correct knock-in at the ace3 locus in T. reesei genomes. The single-copy DNA fragment integration in transformed clones was verified by qPCR (Additional file 3: Figure S2C-D). The hygromycin marker gene in the transformants was excised using xylose-induced cre recombinase expression [32], and then the intermediate transformants were turned into the final transformants by excising the hygromycin marker gene. The final transformants were obtained and confirmed by hygromycin sensitive phenotype and with the second-round diagnostic PCR. Thus, the final A723/A734 transformants were used for further analysis.

Cellulase production in a shake flask and fermenter culture

Cellulase production in a shake flask was conducted according to a previously described method [26], with some modification. In brief, conidia (final concentration 106/mL) of T. reesei strains were grown at 28 °C, in 20 mL of 2× Mandels’ medium containing 2% (w/v) lactose or 1% (w/v) Avicel (PH-101, Sigma-Aldrich) as the sole carbon source. The biomass dry weights were indirectly measured by calculating the total amount of intracellular proteins [37]. The supernatant was used for cellulase assays. Mycelia were collected for RNA extraction.

The activity of the produced cellulase was measured as described in another study [38]. In brief, the pNPCase and pNPGase activities were determined against 5 mM p-nitrophenol-d-cellobioside (pNPC, Sigma-Aldrich) and p-nitrophenyl β-d-glucopyranoside (pNPG, Sigma-Aldrich) as substrates in 50 mM sodium acetate buffer at pH 5.0 at 50 °C for 30 min, respectively. The release of p-nitrophenol was determined by measuring absorbance at 405 nm. One unit of pNPCase and pNPGase activities was defined as 1 μmol of p-nitrophenol released per minute. The CMCase activities were determined by incubation in 50 mM sodium acetate buffer with 1% carboxymethylcellulose (CMC, Sigma-Aldrich), at pH 5.0, 50 °C and for 30 min. The FPase activities were determined using Whatman filter paper as the substrate with a 50 mM sodium acetate buffer at pH 5.0, 50 °C, and for 30 min. One unit of CMCase or FPase activity was defined as the amount of enzyme producing 1 μmol of reducing sugar per min.

Cellulase production in a fermenter culture was conducted according to the method described by Li et al. [39] with some modification. In brief, fermentation was carried out in the 30-L fermenter (Shanghai Bailun Bio-technology Co., Ltd.) with an initial working volume of 10 L at 28 °C for mycelial growth. Seed cultivation was performed as follows: for each strain, about 109 conidia were inoculated into 1 L of 2× Mandels’ medium and 20 g/L of glucose, then cultivated by rotation (200 rpm) at 28 °C for 2 days. This culture was poured into 9 L of fresh 2× Mandels’ medium containing 10 g/L of wheat bran and 15 g/L of Avicel in a 30 L jar fermenter. A mixture of glucose and β-disaccharides (MGDS; SUNSON®, Beijing, China) was fed after inoculation. The feeding took place every 6 h, which maintained glucose concentration low, between 0.05 g/L and 0.30 g/L. The temperature was decreased to 25 °C after 48 h for more efficient cellulase production. The dissolved oxygen (DO) and pH were controlled as described by Li et al. [39]. The samples were taken every 24 h, and the supernatant was analyzed for the FPase, pNPCase, pNPGase, and CMCase activities. Mycelia were collected for biomass measurement.

RNA extraction and real-time reverse-transcription polymerase chain reaction (RT-qPCR)

The methods used for RNA extraction and RT-qPCR methods are as those described by Chen et al. [33]. In brief, total RNA was extracted from cell fresh weight using a FastRNA Pro Red Kit (MPbio, Irvine, CA, USA). Synthesis of cDNA from total RNA was performed using the TransScript One-Step gDNA Removal and cDNA Synthesis SuperMix (TransGen, Shanghai, China), according to the manufacturer’s instructions. For RT-qPCR, the PerfectStart™ Green qPCR SuperMix (TransGen, Shanghai, China) was used (see Additional file 8: Table S1). The transcriptional levels of the sar1 gene and the RNA of the parental strain were measured for reference calculation and data normalization. Primers used in RT-qPCR are listed in Additional file 8: Table S2.

Pre-treatment and enzymatic hydrolysis of lignocellulose biomass

Dry dilute acid pretreated and bio-detoxified corn stover (containing 37.6% cellulose and 4.4% hemicellulose) was donated by Professor Jie Bao [40]. The hydrolysis efficiency of the crude cellulase was evaluated by mixing 5% (w/v) dry pretreated and bio-detoxified corn stover as a substrate and the same amount of crude enzyme (5 mL) in 50 mM phosphate buffer to a final volume of 20 mL at 50 °C and pH 5.0 for 72 h. The glucose concentration in the supernatant was determined using a glucose assay kit and glucose yield was analyzed as described by Li et al. [39]. In brief, the glucose concentration in the supernatant was measured with the GOD (glucose oxidase) method. The glucose yield was calculated as follows: Glucose yield (%) = (Glucose (g) × 0.9 × 100)/(Cellulose in substrate (g)).

Statistical analysis

All experiments were performed with at least three independent samples with identical or similar results. The error bars indicate standard deviation (SD) of the mean of triplicates. Student’s t test was used to compare two samples, and Duncan’s multiple-range test was used for multiple comparisons. Within each set of experiments, p < 0.05 was considered significant.

Availability of data and materials

All data generated or analyzed during this study are included in this published article [and its additional files].

References

  1. de Paula RG, Antoniêto ACC, Ribeiro LFC, Srivastava N, O’Donovan A, Mishra PK, Gupta VK, Silva RN. Engineered microbial host selection for value-added bioproducts from lignocellulose. Biotechnol Adv. 2019;37:107347.

    Article  Google Scholar 

  2. Yang X, Xu M, Yang S. Metabolic and process engineering of clostridium cellulovorans for biofuel production from cellulose. Metab Eng. 2015;32:39–48.

    Article  Google Scholar 

  3. Kim SR, Skerker JM, Kong II, Kim H, Maurer MJ, Zhang GC, et al. Metabolic engineering of a haploid strain derived from a triploid industrial yeast for producing cellulosic ethanol. Metab Eng. 2017;40:176–85.

    Article  CAS  Google Scholar 

  4. Li J, Lin L, Sun T, Xu J, Ji J, Liu Q, Tian C. Direct production of commodity chemicals from lignocellulose using Myceliophthora thermophile. Metab Eng. 2019;05:007.

    Google Scholar 

  5. Liu G, Qu Y. Engineering of filamentous fungi for efficient conversion of lignocellulose: tools, recent advances and prospects. Biotechnol Adv. 2018;37:519–29.

    Article  Google Scholar 

  6. Bischof RH, Ramoni J, Seiboth B. Cellulases and beyond: the first 70 years of the enzyme producer Trichoderma reesei. Microb Cell Fact. 2016;15:106.

    Article  Google Scholar 

  7. Peterson R, Nevalainen H. Trichoderma reesei RUT-C30—thirty years of strain improvement. Microbiology. 2012;158:58–68.

    Article  CAS  Google Scholar 

  8. Le Crom S, Schackwitz W, Pennacchio L, Magnuson JK, Culley DE, Collett JR, Martin J, Druzhinina IS, Mathis H, Monot F, Seiboth B, Cherry B, Rey M, Berka R, Kubicek CP, Baker SE, Margeot A. Tracking the roots of cellulase hyperproduction by the fungus Trichoderma reesei using massively parallel DNA sequencing. Proc Natl Acad Sci USA. 2009;106:16151–6.

    Article  Google Scholar 

  9. Stavrinides A, Al-Shamma’a AI, Phipps DA. Investigation into the production of a cellulytic saccharomyces—identification of a high cellulytic Trichoderma spp. for gene selection. Second International Conference on Developments in Esystems Engineering. 2009;IEEE.

  10. Kawamori M, Morikawa Y, Takasawa S. Induction and production of cellulases by l-sorbose in Trichoderma reesei. Appl Microbiol Biotechnol. 1986;24:449–53.

    CAS  Google Scholar 

  11. Nogawa M, Goto M, Okada H, et al. L-Sorbose induces cellulase gene transcription in the cellulolytic fungus Trichoderma reesei. Curr Genet. 2001;38(6):329–34.

    Article  CAS  Google Scholar 

  12. Derntl C, Gudynaite-Savitch L, Calixte S, White T, Mach RL, Mach-Aigner AR. Mutation of the Xylanase regulator 1 causes a glucose blind hydrolase expressing phenotype in industrially used Trichoderma strains. Biotechnol Biofuels. 2013;6:62.

    Article  CAS  Google Scholar 

  13. Shida Y, Yamaguchi K, Nitta M, Nakamura A, Takahashi M, Kidokoro S, Mori K, Tashiro K, Kuhara S, Matsuzawa T, Yaoi K. The impact of a single-nucleotide mutation of bgl2 on cellulase induction in a Trichoderma reesei mutant. Biotechnol Biofuels. 2015;8:230.

    Article  Google Scholar 

  14. Liu P, Lin A, Zhang G, Zhang J, Chen Y, Shen T, Zhao J, Wei D, Wang W. Enhancement of cellulase production in Trichoderma reesei RUT-C30 by comparative genomic screening. Microb Cell Fact. 2019;18:81.

    Article  Google Scholar 

  15. Martinez D, Berka RM, Henrissat B, Saloheimo M, Arvas M, Baker SE, Chapman J, Chertkov O, Coutinho PM, Cullen D, Danchin EG, Grigoriev IV, Harris P, Jackson M, Kubicek CP, Han CS, Ho I, Larrondo LF, de Leon AL, Magnuson JK, Merino S, Misra M, Nelson B, Putnam N, Robbertse B, Salamov AA, Schmoll M, Terry A, Thayer N, Westerholm-Parvinen A, Schoch CL, Yao J, Barabote R, Nelson MA, Detter C, Bruce D, Kuske CR, Xie G, Richardson P, Rokhsar DS, Lucas SM, Rubin EM, Dunn-Coleman N, Ward M, Brettin TS. Genome sequencing and analysis of the biomass-degrading fungus Trichoderma reesei (syn. Hypocrea jecorina). Nat Biotechnol. 2008;26:553–60.

    Article  CAS  Google Scholar 

  16. Kubicek CP, Mikus M, Schuster A, Schmoll M, Seiboth B. Metabolic engineering strategies for the improvement of cellulase production by Hypocrea jecorina. Biotechnol Biofuels. 2009;2:19.

    Article  Google Scholar 

  17. Derntl C, Gudynaite-Savitch L, Calixte S, White T, Mach RL, Mach-Aigner AR. Mutation of the Xylanase regulator 1 causes a glucose blind hydrolase expressing phenotype in industrially used Trichoderma strains. Biotechnol Biofuels. 2013;6(1):62.

    Article  CAS  Google Scholar 

  18. Zhang X, Li Y, Zhao X, Bai F. Constitutive cellulase production from glucose using the recombinant Trichoderma reesei strain overexpressing an artificial transcription activator. Bioresour Technol. 2017;223:317–22.

    Article  CAS  Google Scholar 

  19. Derntl C, Mach RL, Mach-Aigner AR. Fusion transcription factors for strong, constitutive expression of cellulases and xylanases in Trichoderma reesei. Biotechnol Biofuels. 2019;12:231.

    Article  Google Scholar 

  20. Wang F, Zhang R, Han L, Guo W, Du Z, Niu K, Liu Y, Jia C, Fang X. Use of fusion transcription factors to reprogram cellulase transcription and enable efficient cellulase production in Trichoderma reesei. Biotechnol Biofuels. 2019;12:244.

    Article  Google Scholar 

  21. Benocci T, Aguilar-Pontes MV, Zhou M, Seiboth B, De Vries RP. Regulators of plant biomass degradation in ascomycetous fungi. Biotechnol Biofuels. 2017;10:152.

    Article  Google Scholar 

  22. Porciuncula JDO, Furukawa T, Mori K, Shida Y, Hirakawa H, Tashiro K, Kuhara S, Nakagawa S, Morikawa Y, Ogasawara W. Single nucleotide polymorphism analysis of a Trichoderma reesei hyper-cellulolytic mutant developed in Japan. Biosci Biotechnol Biochem. 2013;77:534–43.

    Article  CAS  Google Scholar 

  23. Mello-De-Sousa TM, Gorsche R, Rassinger A, Poças-Fonseca MJ, Mach RL, Mach-Aigner AR. A truncated form of the carbon catabolite repressor 1 increases cellulase production in Trichoderma reesei. Biotechnol Biofuels. 2014;7:129.

    Article  Google Scholar 

  24. Nitta M, Furukawa T, Shida Y, Mori K, Kuhara S, Morikawa Y, Ogasawara W. A new Zn(II)2Cys6-type transcription factor BglR regulates β-glucosidase expression in Trichoderma reesei. Fungal Genet Biol. 2012;49:390–7.

    Article  Google Scholar 

  25. Häkkinen M, Valkonen MJ, Westerholm-Parvinen A, Aro N, Arvas M, Vitikainen M, Penttil M, Saloheimo M, Pakula TM. Screening of candidate regulators for cellulase and hemicellulase production in Trichoderma reesei and identification of a factor essential for cellulase production. Biotechnol Biofuels. 2014;7:14.

    Article  Google Scholar 

  26. Zhang J, Chen Y, Wu C, Liu P, Wang W, Wei D. The transcription factor ACE3 controls cellulase activities and lactose metabolism via two additional regulators in the fungus Trichoderma reesei. J Biol Chem. 2019;294(48):18435–50.

    Article  CAS  Google Scholar 

  27. Geysens S, Pakula T, Uusitalo J, Dewerte I, Penttila M, Contreras R. Cloning and characterization of the glucosidase II alpha subunit gene of Trichoderma reesei: a frameshift mutation results in the aberrant glycosylation profile of the hypercellulolytic strain Rut-C30. Appl Environ Microbiol. 2005;71:2910–24.

    Article  CAS  Google Scholar 

  28. Seidl V, Gamauf C, Druzhinina IS, Seiboth B, Hartl L, Kubicek CP. The Hypocrea jecorina (Trichoderma reesei) hypercellulolytic mutant Rut C30 lacks a 85 kb (29 gene-encoding) region of the wild-type genome. BMC Genomics. 2008;9:327–30.

    Article  Google Scholar 

  29. Wang S, Liu G, Wang J, Yu J, Huang B, Xing M. Enhancing cellulase production in Trichoderma reesei RUT C30 through combined manipulation of activating and repressing genes. J Ind Microbiol Biot. 2013;40:633–41.

    Article  CAS  Google Scholar 

  30. Lv X, Zheng F, Li C, Zhang W, et al. Characterization of a copper responsive promoter and its mediated overexpression of the xylanase regulator 1 results in an induction-independent production of cellulases in Trichoderma reesei. Biotechnol Biofuels. 2015;8:67.

    Article  Google Scholar 

  31. Mandels M, Weber J. The production of cellulases. Cellulases and their applications. Washington: American Chemical Society; 1969. p. 391–414.

    Book  Google Scholar 

  32. Zhang L, Zhao X, Zhang G, Zhang J, Wang X, Zhang S, Wang W, Wei D. Light-inducible genetic engineering and control of non-homologous end-joining in industrial eukaryotic microorganisms: LML 3.0 and OFN 1.0. Sci Rep. 2016;6:20761.

    Article  Google Scholar 

  33. Chen Y, Wu C, Shen Y, Ma Y, Wei D, Wang W. N,N-dimethylformamide induces cellulase production in the filamentous fungus Trichoderma reesei. Biotechnol Biofuels. 2019;12:36.

    Article  Google Scholar 

  34. Xue X, Wu Y, Qin X, et al. Revisiting overexpression of a heterologous β-glucosidase in Trichoderma reesei: fusion expression of the Neosartorya fischeri Bgl3A to cbh1 enhances the overall as well as individual cellulase activities. Microb Cell Fact. 2016;15(1):122.

    Article  Google Scholar 

  35. Li C, Lin F, Zhou L, et al. Cellulase hyper-production by Trichoderma reesei mutant SEU-7 on lactose. Biotechnol Biofuels. 2017;10(1):228.

    Article  Google Scholar 

  36. Tisch D, Kubicek CP, Schmoll M. The phosducin-like protein PhLP1 impacts regulation of glycoside hydrolases and light response in Trichoderma reesei. BMC Genomics. 2011;12(1):613.

    Article  CAS  Google Scholar 

  37. Chen Y, Shen Y, Wang W, Wei D. Mn2 + modulates the expression of cellulase genes in Trichoderma reesei Rut-C30 via calcium signaling. Biotechnol Biofuels. 2018;11:54.

    Article  Google Scholar 

  38. Li J, Zhang F, Li J, Zhang Z, Bai F, Chen J, Zhao X. Rapid production of lignocellulolytic enzymes by Trichoderma harzianum LZ117 isolated from Tibet for biomass degradation. Bioresour Technol. 2019;292:122063.

    Article  Google Scholar 

  39. Li Y, Liu C, Bai F, Zhao X. Overproduction of cellulase by Trichoderma reesei RUT C30 through batch-feeding of synthesized low-cost sugar mixture. Bioresour Technol. 2016;216:503–10.

    Article  CAS  Google Scholar 

  40. Qiu Z, Gao Q, Bao J. Constructing xylose-assimilating pathways in Pediococcus acidilactici for high titer D-lactic acid fermentation from corn stover feedstock. Bioresour Technol. 2017;245:1369–76.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

Not applicable.

Funding

The project funded by China Postdoctoral Science Foundation funded project (No. 2019M661402), the Open Funding Project of the State Key Laboratory of Bioreactor Engineering, and the Fundamental Research Funds for the Central Universities (No. 222201714053).

Author information

Author notes

  1. Yumeng Chen and Chuan Wu contributed equally to this work

Authors and Affiliations

  1. State Key Lab of Bioreactor Engineering, East China University of Science and Technology, P.O.B. 311, 130 Meilong Road, Shanghai, 200237, China

    Yumeng Chen, Chuan Wu, Xingjia Fan, Dongzhi Wei & Wei Wang

  2. State Key Laboratory of Microbial Metabolism, Joint International Research Laboratory of Metabolic & Developmental Sciences, School of Life Sciences and Biotechnology, Shanghai Jiao Tong University, Shanghai, 200240, China

    Xinqing Zhao

  3. College of Life Science, Jiangxi Normal University, Nanchang, 330022, China

    Xihua Zhao

  4. Sunson Industry Group Co, Ltd,, Beijing, China

    Tao Shen

Authors
  1. Yumeng Chen
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Chuan Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Xingjia Fan
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Xinqing Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Xihua Zhao
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Tao Shen
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Dongzhi Wei
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Wei Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

WW initiated, designed, and coordinated the study and reviewed the manuscript. YC and CW planned and carried out experiments and measurements, and interpreted experimental data. Xi F performed some experiments. DW, Xin Z, Xih Z and TS provided useful advice. All authors have read and approved the final manuscript.

Corresponding author

Correspondence to Wei Wang.

Ethics declarations

Ethics approval and consent to participate

Not applicable.

Consent for publication

Not applicable.

Competing interests

The authors declare no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Additional file 1: Figure S1.

The DNA alignment of the native and truncated ace3 loci from QM6a and Rut-C30, respectively. The missense mutation of C2883 to T2883 in the truncated type ace3 eventually results in a premature termination of translation and in a truncated ACE3 protein.

Additional file 2:

Determining copy numbers by qPCR.

Additional file 3: Figure S2.

The verification of the transformants. (A-B) PCR amplification results of the A734 (A) and A723 (B) transformants. F were obtained using the primer pair ace3-CF/D70-4. R were obtained using the primer pair HG3.6/ace3-CR (Additional file 8: Table S1). (C) Schematic for identification of single-copy DNA integration in transformants genome. Primer pairs (ace3-T1/ace3-T2 and ace3-T3/ace3-T4 list in Additional file 8: Table S1) showed in red were used to identify the copy number of integrated genes. (D) The verification of copy numbers for A734 and A723 transformants by qPCR. The genome of QM6a is used as a reference with the single copy of native ace3. (E) A723 and A734 transformants were confirmed by DNA sequencing. The diagnostic PCR amplification results were sequenced. Black boxes represent the missense mutation loci in the sequence of ace3. Red underline represents the DNA sequence of the 11 truncated amino acids. The green dotted underlines indicate the stop codons.

Additional file 4: Figure S3.

Effects of the native type ACE3-734 versus the truncated type ACE3-723 on the transcription of the genes encoding the major cellulase (cbh1) and its essential transcription factors (ace3 and xyr1) in the NG14 group. Three independent experiments with three biological replicates each were performed. The sar1 gene was used as the internal control for normalization. Values are the mean ± SD of the results from three independent experiments. Asterisks indicate a significant difference (*p < 0.05, Student’s t test).

Additional file 5: Figure S4.

Construction of transformants and effects of the truncated type ACE3-723 versus the native type ACE3-734 on the transcription of genes in the QM6a group. (A) Truncation of ACE3-734 to ACE3-723 in T. reesei QM6a, QM9414, and PC-3-7. LML 2.1 is the erasable hygromycin selection marker in T. reesei. A723 transformants carry the truncated ACE3-723 as the test strains. A734 transformants bear ACE3-734 as controls. The black square denotes the loxP site left at the C-terminus of ACE3 after the marker was excised. The primers ace3-CF and D70-4 and HG3.6 and ace3-CR were used to verify the genotype of ACE3. (B–J) Transcription of genes encoding the major cellulase (cbh1) and essential transcription factors for cellulase (ace3 and xyr1) were evaluated in T. reesei QM6a, QM9414, and PC-3-7 transformants. Three independent experiments with three biological replicates each were performed. The sar1 gene was used as the internal control for normalization. Values are the mean ± SD of the results from three independent experiments. Asterisks indicate a significant difference (*p < 0.05, Student’s t test).

Additional file 6: Figure S5.

Saccharification of corn stover by the crude enzyme from Rut-C30, PC-3-7 and PC-3-7-A723. The crude enzymes from Rut-C30, PC-3-7 and PC-3-7-A723 were mixed with 5% (w/v) corn stover and the same volumes of crude enzyme (5 mL). Values represent the mean and standard deviation of triplicate measurements.

Additional file 7: Table S1.

Comparison of maximum cellulase activity and biomass production between PC-3-7 and PC-3-7-A723 after 240-h fed-batch fermentation in a 30-L fermenter.

Additional file 8: Table S2.

Primers used in this study.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chen, Y., Wu, C., Fan, X. et al. Engineering of Trichoderma reesei for enhanced degradation of lignocellulosic biomass by truncation of the cellulase activator ACE3. Biotechnol Biofuels 13, 62 (2020). https://doi.org/10.1186/s13068-020-01701-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13068-020-01701-3

Keywords

Biotechnology for Biofuels and Bioproducts

ISSN: 2731-3654

Contact us