Skip to main content
Download PDF
Download ePub

Road tunnel-derived coarse, fine and ultrafine particulate matter: physical and chemical characterization and pro-inflammatory responses in human bronchial epithelial cells

Particle and Fibre Toxicology volume 19, Article number: 45 (2022) Cite this article

Abstract

Background

Traffic particulate matter (PM) comprises a mixture of particles from fuel combustion and wear of road pavement, tires and brakes. In countries with low winter temperatures the relative contribution of mineral-rich PM from road abrasion may be especially high due to use of studded tires during winter season. The aim of the present study was to sample and characterize size-fractioned PM from two road tunnels paved with different stone materials in the asphalt, and to compare the pro-inflammatory potential of these fractions in human bronchial epithelial cells (HBEC3-KT) in relation to physicochemical characteristics.

Methods

The road tunnel PM was collected with a vacuum pump and a high-volume cascade impactor sampler. PM was sampled during winter, both during humid and dry road surface conditions, and before and after cleaning the tunnels. Samples were analysed for hydrodynamic size distribution, content of elemental carbon (EC), organic carbon (OC) and endotoxin, and the capacity for acellular generation of reactive oxygen species. Cytotoxicity and pro-inflammatory responses were assessed in HBEC3-KT cells after exposure to coarse (2.5–10 μm), fine (0.18–2.5 μm) and ultrafine PM (≤ 0.18 μm), as well as particles from the respective stone materials used in the pavement.

Results

The pro-inflammatory potency of the PM samples varied between road tunnels and size fractions, but showed more marked responses than for the stone materials used in asphalt of the respective tunnels. In particular, fine samples showed significant increases as low as 25 µg/mL (2.6 µg/cm2) and were more potent than coarse samples, while ultrafine samples showed more variable responses between tunnels, sampling conditions and endpoints. The most marked responses were observed for fine PM sampled during humid road surface conditions. Linear correlation analysis showed that particle-induced cytokine responses were correlated to OC levels, while no correlations were observed for other PM characteristics.

Conclusions

The pro-inflammatory potential of fine road tunnel PM sampled during winter season was high compared to coarse PM. The differences between the PM-induced cytokine responses were not related to stone materials in the asphalt. However, the ratio of OC to total PM mass was associated with the pro-inflammatory potential.

Introduction

Air pollution particulate matter (PM) is one of the largest environmental risk factors to human health and all-cause mortality worldwide [1]. Inhalation of PM has been associated with development and/or exacerbation of cardiovascular diseases and various airway diseases such as asthma, chronic obstructive pulmonary disease (COPD) and lung cancer, as well as increased susceptibility towards respiratory infections [2,3,4,5]. Different classes of PM may induce specific airway pathologies, illustrating that PM-induced airway diseases are influenced by PM characteristics such as particle sizes and chemical composition [6]. Pulmonary inflammation is regarded as a key event contributing to the adverse health effects of ambient PM, and there is strong support for a causal relationship between induction of pro-inflammatory responses in the airway mucosa and development or exacerbation of respiratory disease by PM exposure [4, 5, 7]. The chemokine CXC-motif ligand 8 (CXCL8), interleukin (IL)-6, IL-1α and IL-1β are important cytokines in lung inflammation. The main role of CXCL8 is to attract neutrophilic cells to the site of damage in vivo, and subsequently engulf PM, microbes and damaged cells, and is thus an important part of the defence system in the airways. IL-1α, IL-1β and TNF-α are pro-inflammatory cytokines involved in the orchestration of CXCL8 and a range of other cytokines during inflammation [8, 9]. Reactive oxygen species (ROS) have been regarded as important determinants in PM-induced inflammation, and the ability to generate ROS in cell-free systems has been suggested as a proxy of particle toxicity [10, 11], although consistent correlations with biological effects are still lacking [12, 13]. The inflammatory responses to ambient PM have been related to a variety of PM constituents like organic carbon (OC), including polycyclic aromatic hydrocarbons (PAHs), as well as metals. However, the contribution of different particle constituents is highly dependent on the PM source, such as traffic, domestic heating and industrial processes, the cell types and endpoints examined [14,15,16,17,18].

PM derived from traffic comprises of a mixture of particles from fuel combustion and from abrasion of road pavement, tires and brakes [19, 20]. Diesel exhaust particles (DEP) generated by combustion of diesel fuel are the most studied source of traffic-derived PM. These particles are often found as aggregates of various sizes and consist of a carbon core with adhered soluble organic carbon (OC) and metals constituents that to a varying extent are considered to mediate DEP-induced inflammatory responses [21]. Particles generated from road wear consist primarily of mineral particles from the stone aggregate material, as well as organic components from bitumen [22]. Strict regulatory policies in EU have led to introduction of new filter and engine technology, new fuels, and an increased prevalence of electric vehicles. Due to this development the emissions from diesel engines have been substantially reduced over the last decades. Accordingly, the relative contribution of wear PM in traffic-derived PM has increased steadily, and this development will continue in the future [23].

PM is usually divided in three size fractions based on its aerodynamic diameter. Coarse PM consists of particles with a diameter between 10 and 2.5 μm, while fine PM in the present study is defined as particles between 2.5 and 0.18 μm, and ultrafine PM as particles below 0.18 μm. Wear PM has mostly been linked to the coarse fraction, but may also be a constituent of the fine fraction [7, 24, 25]. In comparison, combustion particles have mostly been associated with the fine and ultrafine fractions [26]. Although their effects may overlap, coarse PM has mainly been associated with respiratory effects, whereas the fine and ultrafine PM are more strongly linked to cardiovascular effects [7]. The potency of the different size fractions to cause adverse respiratory effects has been explored in epidemiological studies [27,28,29], in clinical human studies and in animal studies [14, 30,31,32], in addition to cell culture studies [11, 15, 17, 18, 30, 31, 33,34,35,36,37,38]. Several experimental studies have found that coarse ambient PM is more potent and induces higher pro-inflammatory responses than fine and ultrafine PM when compared at equal mass. This has mostly been attributed to high content of endotoxins [11, 15, 18, 30, 33, 35]. Endotoxins like lipopolysaccharide (LPS) are known to stimulate pro-inflammatory responses [39], and may enhance responses to PM at low concentrations [40].

The levels of ambient PM in Nordic countries are generally low. However, the levels of coarse PM may be high during winter season due to the use of studded tires, which generates more PM from road abrasion and resuspension of road dust than friction tires [41]. Source apportionment studies show that wear PM constitutes a high proportion of traffic-related PM [42, 43] and represent a major environmental challenge. Asphalt consists of 95% stone aggregates, with the remaining 5% consisting of bitumen and other additives [25]. Interestingly, PM from asphalt with different stone materials generated in a road wear simulator has been reported to induce pro-inflammatory responses with different potency in cell cultures of macrophages [24], suggesting a potential role for mineral composition in PM toxicity. In support of this, extensive studies by our research group have shown that stone- and mineral particles of different composition may vary in pro-inflammatory potential [44,45,46,47]. In early studies, particle samples with high content of feldspar minerals were the least potent, suggesting that it might be beneficial to use feldspar-rich stone types in the asphalt [46]. However, the full impact of using different stone materials for ambient PM toxicity is still largely unknown.

In the present study, traffic-related PM from roads paved with stone materials with different feldspar content was collected in two tunnels to reduce contamination with PM from other sources. PM was sampled both under humid and dry road surface conditions, and before and after road surface cleaning of the tunnels. The coarse, fine and ultrafine road tunnel PM samples were characterized for hydrodynamic size distribution, content of organic (OC) and elemental carbon (EC), endotoxin content and potential to induce acellular ROS. Furthermore, the pro-inflammatory potential of the tunnel PM samples was examined in human bronchial epithelial cells (HBEC3-KT). The responses of the tunnel PM samples were compared to the potency of particles generated from the respective stone materials used in the tunnels. Finally, the possible correlations between the different road tunnel PM characteristics and pro-inflammatory potential were analyzed.

Results

Traffic-derived PM (coarse, fine and ultrafine fractions) were sampled inside two road tunnels during the winter season, both during humid and dry road surface conditions, and before and after road surface cleaning. The two tunnels Marienborg and Hell which are located in the Trondheim area, Norway (Additional file 1: Fig. S1) were paved with asphalt containing rhomb porphyry and quartz diorite, respectively.

Characterization of the PM fractions

The mass of PM sampled per hour varied between the two tunnels and was lower during humid compared to dry conditions. In both tunnels, the mass of PM sampled was larger for the coarse fraction than for the fine and ultrafine PM during all conditions (Table 1). The levels of PM were consistently highest in the Hell tunnel for all size fractions, especially during dry conditions where the amounts of coarse, fine and ultrafine PM samples were 30-fold, 10-fold and 17-fold higher than in the Marienborg tunnel. The differences between the two tunnels were substantially lower during humid road surface conditions. Particles were also collected after road surface cleaning in both tunnels, a measure to reduce road dust. However, no substantial alterations in mass of sampled PM were observed after the road surface cleaning (Table 1).

Table 1 The hydrodynamic size distributions of road tunnel PM samples
Full size table

Hydrodynamic size distributions

Hydrodynamic size distributions of the coarse, fine and ultrafine PM samples after extraction from the filter and suspension in water are presented as the median size related to mass and number. On a mass basis, the data showed that the median sizes were largest for coarse PM samples, and smallest for the fine and ultrafine PM samples (Table 1). However, the median particle sizes were rather similar for the different PM fractions, possibly due to aggregation and agglomeration of particles during collection and processing. Although the differences were small, the size distribution profiles showed that the ultrafine fraction contained a substantial higher proportion of nano-sized (around 100 nm) particles compared to the coarse fractions, as well as most of the fine fractions (Fig. 1). Humid road surface conditions also seemed to affect size distributions on a relative mass basis, with a shift towards larger sizes for the fine and ultrafine PM sampled in the Marienborg tunnel (Fig. 1B), but not for the PM sampled in the Hell tunnel (Fig. 1D). Furthermore, road surface cleaning did not consistently affect the hydrodynamic size distribution profiles of the PM samples on a relative mass basis (data not shown). On a particle number basis, the median hydrodynamic sizes were substantially lower than on a mass basis, and relatively similar for the coarse, fine and ultrafine PM fractions (Table1). Nano-sized particles (< 100 nm) completely dominated particle counts for all PM samples, but with differences depending on the tunnel and road surface conditions (Additional file 2: Fig. S2). Road surface cleaning reduced the nano-sized peak substantially for the ultrafine PM fraction both from the Marienborg and Hell tunnels, whereas no consistent changes were observed for the fine and coarse PM fractions (data not shown).

Fig. 1
figure 1

Hydrodynamic size distribution based on the relative mass of coarse, fine and ultrafine PM sampled in the Marienborg and Hell tunnels. A Marienborg PM, dry road surface conditions; B Marienborg PM, humid road surface conditions; C Hell PM, dry road surface conditions; D Hell PM, humid road surface conditions. The hydrodynamic size distributions were determined by the Disc centrifugation method, as described in “Materials and methods”, from representative analyses

Full size image

Endotoxins

The levels of endotoxin (lipopolysaccharide; LPS) were low (< 1 EU/mg PM) in all tunnel PM samples (Table 2). Furthermore, exposure to LPS in the concentration range of 0.01–10 ng/mL (0.1–100 EU/mL) for 20 h induced no detectable cytokine responses in the HBEC3-KT cells (data not shown), suggesting that the impact of LPS on these cells is negligible.

Table 2 Endotoxin levels of road tunnel PM
Full size table

Acellular oxidative potential of the PM fractions

The capacity of particles to generate ROS in cell-free systems is regarded as a strong predictor of the potential health hazard of PM and has been proposed as a more relevant metric than PM mass. The oxidative potential (OP) of the tunnel PM samples was measured by electron spin resonance (OPESR) and dithiothreitol (OPDTT) methods [10]. Correlation analysis showed that acellular ROS induced by the PM samples as measured by ESR and DDT was correlated (r = 0.947, p = 0.001, see also Additional file 3: Fig. S3). The coarse and fine PM samples from Marienborg road tunnel were almost equally redox active and exhibited 7–tenfold higher OP than the ultrafine PM samples. Humid and dry road surface conditions or road surface cleaning did not affect the acellular OP of the particles significantly. The PM sampled in the Hell tunnel, especially the coarse fraction, had a lower OP than the respective PM from the Marienborg tunnel. Also in the Hell tunnel, the ultrafine fraction had lowest OP in nearly all samples (Table 3).

Table 3 Oxidative potential (OP) of road tunnel PM
Full size table

Organic and elemental carbon levels of the PM fractions

The content of OC and EC was determined in all tunnel PM samples according to NIOSH protocol (Table 4). Most of the total carbon was OC, with no or very slight contribution of EC (< 1%). The only exception was the ultrafine PM from Marienborg tunnel sampled during humid conditions, which contained 120 µg EC/mg PM. The data showed that total OC varied between the size fractions, tunnels and road surface conditions. Overall, the fine and ultrafine PM samples seemed to contain higher OC levels than coarse PM samples, and all size fractions contained more OC when sampled during humid than dry conditions. The OC levels in particles sampled in the Marienborg tunnel were generally higher than the corresponding PM sampled in the Hell tunnel (Table 4). The OC content of the coarse and fine fraction were not profoundly affected by road surface cleaning in either tunnel. In contrast, cleaning was associated with a substantial reduction of OC in the ultrafine PM sampled in the Marienborg tunnel, but not in the Hell tunnel (Table 4). To further characterize OC from the PM samples, we used a method adopted from NIOSH temperature protocol allowing to distinguish different temperature fractions up to 870 °C (i.e., volatility and molecular weight; Fig. 2). The relative pattern of OC detected at various temperatures varied between coarse, fine and ultrafine fractions. Highest amounts of OC from coarse PM were detected at 475 °C. In contrast, both fine and ultrafine PM released highest amounts of OC at 870 °C.

Table 4 Elemental carbon (EC) and organic carbon (OC) levels, of road tunnel PM
Full size table
Fig. 2
figure 2

Organic carbon (OC) levels in PM sampled from the road tunnels. The figure includes the OC-content of coarse, fine and ultrafine PM samples from the two tunnels as obtained by increasing temperatures: 310 °C; 475 °C; 615 °C; 870 °C as indicated in the figure. The data represent the mean ± SEM of 3 analyses

Full size image

Cytotoxic and pro-inflammatory responses in HBEC3-KT cells

In the present study, important cytokines such as chemokine CXC-motif ligand 8 (CXCL8), interleukin (IL)-6, IL-1α and IL-1β were examined to assess the pro-inflammatory potential.

Concentration–response relationship of pro-inflammatory effects of PM size fractions

Initially, the pro-inflammatory and cytotoxic potentials of the coarse, fine and ultrafine PM fractions sampled in the Marienborg tunnel upon dry road surface conditions were examined by exposing HBEC3-KT cells to 0, 12.5, 25, 50, 100 and 200 µg/mL (equivalent to 0, 1.3, 2.6, 5.2, 10.4 and 20.8 μg/cm2) of the respective PM fractions for 20 h. The release of the pro-inflammatory cytokines CXCL8, IL-6, IL-1α and IL-1β was markedly increased, with significant and progressive increases for the fine road tunnel PM fraction from 25 µg/mL, and substantially higher than for the coarse and ultrafine PM fraction. The response to the coarse PM fraction was similar to ultrafine PM fraction for CXCL8, but significantly lower for IL-6, IL-1α and IL-1β (Fig. 3). None of the particle fractions significantly reduced the viability of the cells for this concentration-range, as measured by the AlamarBlue assay (Fig. 3E). Similarly, no significant increase in lactate dehydrogenase (LDH) release was detected (data not shown). The concentration–response relationships of PM from the Hell tunnel, as sampled upon dry conditions, induced similar patterns as for PM from the Marienborg tunnel, although with responses of less magnitude (data not shown).

Fig. 3
figure 3

Concentration-dependent cytokine responses in HBEC3-KT cells after exposure to PM sampled from a road tunnel. The cells were exposed to coarse, fine and ultrafine PM sampled from the Marienborg road tunnel during dry road surface conditions. The cells were exposed to 0–200 µg PM/mL (0–20.8 µg/cm2) for 20 h. The cytokine release was analysed by ELISA. A CXCL8; B IL-6; C IL-1α; D IL-1β. The cell viability was determined by AlamarBlue (E). The data represent the mean ± SEM of 3 experiments. Statistical analysis was performed by two-way ANOVA (repeated measured) with Dunnett’s or Tukey multiple comparison test. *Significantly different compared to control, # significantly different from coarse PM, ¤ significantly different from ultrafine PM, p < 0.05

Full size image

Comparison of pro-inflammatory potential of all the sampled PM

Next, we exposed the HBEC3-KT cells to 100 µg/mL (10.4 ug/cm2) of the coarse, fine, and ultrafine PM fractions from the 6 different samples, including both road tunnels, both during dry and humid road surface conditions, and after road surface cleaning. None of the PM samples induced cytotoxicity at this concentration (data not shown). A similar pattern of potency between the different PM samples was observed for most cytokine responses. In agreement with Fig. 3, the fine PM fraction appeared to be the most potent for all samples, with significantly higher responses than coarse and ultrafine PM fractions. However, the only exception was the ultrafine PM sampled in the Marienborg tunnel during humid conditions, which were similar in potency to the fine PM fraction and significantly higher than the particles sampled during dry conditions (Fig. 4A-D). Conversely, responses induced by the ultrafine PM fraction from the Hell tunnel were low and seemed unaffected by the road surface conditions (Fig. 4A-D). The cytokine responses to fine PM fractions tended to be highest during humid conditions, but the differences were only statistically significant for CXCL8 in the Hell tunnel and IL-6 in the Marienborg tunnel. Overall, the response patterns were rather similar for PM samples from the two tunnels, but significantly higher responses were observed for ultrafine PM sampled in Marienborg tunnel during humid conditions compared to corresponding particles sampled in the Hell tunnel (Fig. 4A-D). In addition, fine PM sampled during dry conditions in the Marienborg tunnel induced a significantly higher CXCL8 response than fine PM from the Hell tunnel (Fig. 4A). The PM sampled after road surface cleaning in both tunnels were also examined (Additional file 4: Fig. S4). Reductions in pro-inflammatory potential were only observed for the ultrafine PM sampled in the Marienborg tunnel, reaching statistical significance for IL-1α and IL-1β.

Fig. 4
figure 4

Cytokine responses in HBEC3-KT cells after exposure to PM samples from two road tunnels. The cells were exposed to coarse, fine and ultrafine PM samples from the Marienborg and Hell road tunnels during dry and humid road surface conditions. The cells were exposed to 100 µg/mL (10.4 µg/cm2) PM samples for 20 h. The cytokine release was analysed by ELISA. A CXCL8; B IL-6; C IL-1α; D IL-1β. The data represent the mean ± SEM of 5 experiments. Statistical analysis was performed by two-way ANOVA (repeated measurements) with Tukey’s multiple comparisons test. *Significantly different from control, # significantly different between groups, p < 0.05

Full size image

Comparison of pro-inflammatory responses to road tunnel PM and stone particles

The pro-inflammatory responses to traffic-derived coarse and fine PM from the Marienborg and Hell tunnels were compared to the equivalent concentrations (100 µg/mL; 10.4 µg/cm2) of rhomb porphyry and quartz diorite, the respective stone materials used in pavement of the tunnels. The stone materials induced lower CXCL8 and IL-1α responses in the HBEC3-KT cells compared to the road tunnel PM, although the differences in magnitude depended on the PM size fractions and tunnel. For the Marienborg tunnel, the stone material rhomb porphyry induced significantly lower cytokine responses than coarse and fine PM size fractions sampled during humid conditions (Fig. 5A). For CXCL8, the coarse and fine PM samples induced responses that were approximately 10-fold and 15-fold higher than the rhomb porphyry (Fig. 5A). For the Hell tunnel, the stone material quartz diorite induced a CXCL8 response that was significantly lower than for the coarse and fine PM samples (Fig. 5B). For IL-1α a significantly lower response was only observed compared to the fine PM.

Fig. 5
figure 5

Cytokine responses in HBEC3-KT cells after exposure to PM samples from two road tunnels in comparison to stone particles from the respective tunnels. The cells were exposed to coarse, fine and ultrafine PM samples from the Marienborg (A) and Hell (B) road tunnels, respectively, during humid road surface conditions. The cells were also exposed to rhomb porphyry and quartz diorite for 20 h, at same concentration as the tunnel PM of 100 µg/mL (10.4 µg/cm2). The CXCL8 and IL-1α release were analysed by ELISA. The data represent the mean ± SEM of 5–7 experiments. *Significantly different from control, # significantly different from coarse, fine and ultrafine PM. One-way ANOVA with Tukey’s multiple comparison test, repeated measurements with p < 0.05

Full size image

Correlations between particle characteristics and bioactivity

Linear correlation analyses were carried out to assess putative correlations between different characteristics of the PM samples and pro-inflammatory responses in the HBEC3-KT cells. Overall, similar patterns were observed for all the different cytokines after exposure to the PM samples, with significant correlations between CXCL8 and IL-6 (r = 0.948, p < 0.00001); between CXCL8 and IL-lα (r = 0.909, p< 0.00001); and between CXCL8 and IL-lβ (r = 0.891, p < 0.00001) (see also, Additional file 5: Fig. S5). Thus, only the CXCL8 responses were used for further analyses of the correlation between pro-inflammatory potential and the different PM characteristics. Correlation analysis showed that the OC levels in the coarse, fine and ultrafine fractions of the sampled PM were correlated to the CXCL8 responses in the HBEC3-KT cells. The correlation coefficient depended on the evaporation temperature of different OC-fractions, and the strongest correlation was observed for the content of OC evaporating at 310 °C (r = 0.74, p = 0.0005) and the lowest for OC evaporating at 870 °C (r = 0.43, p = 0.0746). The correlation to total OC from 310 to 870 °C was relatively low (r = 0.568, p = 0.0139) (Fig. 6). No significant correlations were detected between particle-induced CXCL8 responses in the HBEC3-KT cells and the particle hydrodynamic size distribution (as measured on a mass basis), endotoxin content or oxidative potential (measured by ESR) (Additional files 6: Table S6).

Fig. 6
figure 6

Correlation analysis between CXCL8 responses in HBEC3-KT cells and the content of organic carbon (OC) from coarse, fine and ultrafine PM sampled in road tunnels. The CXCL8 release at an exposure concentration of 100 µg/mL (10.4 µg/cm2) (n = 5) was compared to the levels of OC in the PM samples. The correlation was determined using Pearson’s correlation coefficient, which is presented in each panel. A OC at 310 °C; B OC at 475 °C; C OC at 615 °C; D OC at 870 °C; E OC at temperatures from 310 to 870 °C

Full size image

Discussion

In the present study, we assessed the pro-inflammatory effects of traffic-derived coarse, fine, and ultrafine PM sampled from two road tunnels paved with different stone materials during winter season. Sampling of PM in tunnels allows more selective studies of traffic-derived PM by minimizing contamination of particles from non-traffic sources. Such studies are scarce, but some studies have shown physicochemical characterization and source apportionment of road tunnel PM with relatively high levels of wear particles versus exhaust particles with varying content of asphalt abrasion, tire and brake wear PM, depending on season and geographical location [48, 49]. The pro-inflammatory responses of road tunnel PM have been even less characterized, with exception of our previous study [45]. In the present study, fine PM samples were more potent than the coarse samples, as assessed in human bronchial epithelial lung cells (HBEC3-KT), whereas the ultrafine samples varied more in potency between tunnels and road surface conditions. When comparing PM samples from the two tunnels under equal conditions, fine PM from Marienborg tunnel was more potent than fine PM from the Hell tunnel, whereas the coarse PM from the two tunnels showed more similar potencies. The pro-inflammatory potentials of the road tunnel PM were not correlated to hydrodynamic size distributions, endotoxin content or acellular ROS generation. However, the pro-inflammatory responses were positively correlated to OC-content. The stone materials used in the pavement of the two tunnels induced lower pro-inflammatory responses than the tunnel PM samples, particularly compared to fine PM sampled during humid conditions.

Sampling and characterization of coarse, fine and ultrafine road tunnel PM

The relative mass levels of sampled PM differed between the road tunnels and were particularly high in Hell tunnel during dry conditions. This is in accordance with the longer tunnel length, higher number of vehicles per hour, higher speed limit and larger percentages of heavy vehicles and vehicles with studded tires compared to the Marienborg tunnel. The lower levels of PM sampled in Marienborg tunnel compared with the Hell tunnel could also be due to the ventilation system, which is better adjusted to the number of vehicles passing. As previously reported for ambient PM during winter season in Nordic countries, the mass of coarse PM tended to dominate over fine and ultrafine PM [41]. Humid road surface conditions decreased the levels of PM sampled in the Hell tunnel, in accordance with previous studies showing that road surface moisture affects particle mass levels [50].

The measurements of hydrodynamic size distribution showed that the fine and the ultrafine PM samples contained a large proportion of nano-sized particles (around 100 nm) related to mass, while these particles constituted a small proportion of the mass in the coarse PM samples. However, nano-sized particles dominated all size fractions on a particle number basis. Although, the road surface conditions seemed to induce some changes in these hydrodynamic size distributions, both for humid versus dry conditions, and with and without road surface cleaning, the changes were not consistent. Furthermore, it should be noted that the hydrodynamic size distributions of extracted PM samples may have limited value for assessing changes in the aerodynamic size distribution of PM in air.

The relative OC levels of total PM mass were higher in the fine than coarse PM samples, constituting around 50–60% and 10–15% of the total mass of the respective size-fractions. This may reflect that coarse PM is usually dominated by road dust which consists primarily of mineral particles [51, 52], while fine and ultrafine PM consist primarily of particles from combustion sources [26]. The OC content in the PM samples seemed to be relatively high in comparison to other studies reporting ratios of OC/PM in air from European cities for PM2.5 and PM10 [53, 54]. The large contribution of OC in our study could possibly be explained by lower temperatures in the tunnels/Nordic countries during winter due to increased binding of volatile or semi-volatile species to particles (secondary OC) [55,56,57]. This might also explain the higher content of OC in the PM sampled from the tunnel with lowest temperature, as the temperatures differed considerably inside the Marienborg and the Hell tunnel, with average temperatures of 7.3 °C and 14.9 °C, respectively. An unexpected finding in the present study was the very low levels of EC in comparison to OC in our PM samples, with EC levels below 1% of total carbon. In comparison, previous studies show much higher EC levels in traffic-related PM (10–30% of total carbon), depending on geographical location, distance to highways, influence from other PM sources, such as wood- and coal combustion, and seasonal differences in temperature and wind conditions [55, 56, 58,59,60,61]. The EC discrepancy could partly be due to different methods used, as peak inert mode temperatures used in present study (NIOSH, 870 °C) is much higher than in the Interagency Monitoring of Protected Visual Environment (IMPROVE, 550 °C) method. Thus, NIOSH may be subject to premature EC evolution (i.e., underestimation of EC), while IMPROVE may overestimate EC following incomplete OC evolution in the inert atmosphere [62]. Furthermore, we cannot exclude an insufficient extraction of EC from the particle filters. Nevertheless, it may be that the low EC levels reflect the low contamination with particles from other sources than traffic when sampling PM in a road tunnel. It may also be indicative of a high concentration of more volatile secondary OC [57]. The release of PM from modern cars has also been substantially reduced the recent years due to improved filter and catalysator technology. Thus, a particular reduction in EC, will shift the EC/OC ratio [63]. Furthermore, PM released from bitumen in asphalt which probably have a very low EC/OC ratio, may add to this finding.

Pro-inflammatory responses of road tunnel PM compared to the respective stone materials in the pavement

In our early studies, feldspar content seemed to be inversely correlated to the pro-inflammatory potential of stone and mineral particles [45,46,47]. This has also found support in a recent clinical study where human volunteers exposed to quartz diorite particles showed stronger responses in terms of systemic markers of inflammation and blood coagulability than those exposed to rhomb porphyry particles with higher content of feldspar minerals [64, 65]. Furthermore, the clinical study also showed a stronger response for exhaled nitric oxide in volunteers exposed to quartz diorite than rhomb porphyry [66]. Conversely, recent in vitro studies show that stone particles samples composed primarily of feldspar minerals vary in potency, suggesting that other particle components or properties are more important for the pro-inflammatory potential of the particles [44]. Based on our early in vitro and in vivo studies, the Marienborg tunnel was paved with asphalt containing rhomb porphyry, a stone material that consists primarily of feldspar minerals, while the Hell tunnel was paved with quartz diorite, which contains larger amounts of quartz in addition to feldspar and other minerals [44]. While few significant differences were detected between the responses to coarse and fine PM samples from the two tunnels, significantly higher CXCL8 release was detected after exposure to fine PM from Marienborg tunnel compared to the Hell tunnel sampled during dry conditions. Thus, these results support that feldspar content is not a major determinant for the pro-inflammatory potential of traffic-related PM.

Overall, our results show that the PM sampled in the road tunnels mostly induced markedly higher pro-inflammatory responses than the responses induced by the respective stone materials used in the asphalt, suggesting that the stone materials alone contribute relatively little to PM reactivity. In support of this, Gerlofs-Nijland et al. showed that the pro-inflammatory potency of PM from tires and road wear by inhalation in mice was lower than for several other PM sources, including PM from brake pads and diesel exhaust [67]. In contrast, a previous study from the Hell tunnel showed that the mylonite material used in the pavement, which is the same as quartz diorite used in the present study, induced higher pro-inflammatory responses in lung cultures than road dust collected by an air filter in the ceiling of the tunnel [45]. The reason for this discrepancy is unclear but may be due to the sampling methodology or extraction procedure. It should be noted that a recent study from our research group showed that the rhomb porphyry and quartz diorite samples used in the present study induce similar pro-inflammatory responses that are lower than for several other stone particle samples [44]. Thus, it cannot be excluded that using a more potent stone material in the asphalt would lead to more potent road wear particles. In line with this, studies with particles generated in a road wear simulator suggest that wear particles containing asphalt particles with different stone materials differ in potency [24]. It should be emphasized that the potency of traffic-derived PM presumably is not due to a single source, but to a combined effect between PM from different sources, such as combustion PM and wear particles from the stone material, bitumen, tires and brakes. In a recent in vitro study we have shown that mineral particles increase the pro-inflammatory effects of diesel exhaust particles when administered in combination, suggesting that the impact of road wear particles may be larger than would be assumed from the potency of the stone particles alone [68].

Potential effects of other sources on PM reactivity

In addition to particles from the stone material, other forms of wear particles, as well as particles from salting and sanding of the roads, may constitute a large part of the PM mass and potentially affect the PM reactivity. The relative content of salt in traffic-derived PM10 has been estimated to vary from 6–16% [69], and 2–8% [51] during the winter season in Nordic countries. Also the content of particles from sanding in traffic-derived PM10 is reported to be large, constituting 15–45% of PM mass in Nordic countries during winter, although lower than the levels of particles from the road pavement [51]. However, salting and sanding were not used inside the road tunnels in Trondheim, suggesting that these sources are minor contributors to the PM reactivity of our road tunnel PM samples. Conversely, particles from tires and brakes, which contains OC and different metals, may constitute a varying, but smaller part of PM2.5 and PM10 [70]. Although some experimental studies indicate a higher inherent reactivity of particles from these wear sources, further studies are needed to assess their respective contribution to the health impact of traffic-derived PM [67, 70]. The role of these particle sources has not been addressed in the present study of road tunnel PM.

The importance of different PM characteristics for the differential pro-inflammatory responses of coarse, fine and ultrafine road tunnel PM

Overall, fine PM was more potent than coarse PM. Ultrafine PM was also less potent than the fine PM, with exception of the ultrafine PM from the Marienborg tunnel sampled during humid road surface conditions, that showed high responses. No correlations were observed between particle-induced CXCL8 release and the particle hydrodynamic size distributions on a mass basis, suggesting that the particle size was not a major determinant for the pro-inflammatory responses. However, it should be noted that firm conclusions on the impact of particle size on human health cannot be drawn as the hydrodynamic size distribution may not fully correspond to the aerodynamic size distribution of the particles in air. Likewise, no correlation was observed between PM-induced responses and endotoxin content, and exposure to LPS concentrations far higher than the ones detected in the PM samples also failed to elicit cytokine release from the HBEC3-KT cells, suggesting that these cells have low responses to endotoxin. This is in accordance with previous studies showing that very high concentrations of endotoxin are needed to induce pro-inflammatory responses in lung epithelial cells [39, 40]. In contrast to previous studies [10, 11], no correlation was observed between cytokine release and the ability to generate acellular ROS in the present study. While this suggests that ROS generated directly at the particle surface is not an important determinant for particle-induced cytokine release, this does not exclude the possibility that PM-induced cellular ROS via NADPH oxidase, mitochondrial damage or CYP metabolism may be involved in pro-inflammatory responses and cytotoxicity [71].

Notably, a significant correlation was observed between pro-inflammatory responses and OC content of the particle samples, suggesting OC to be an important contributor to the reactivity of the tunnel PM. The correlation was most pronounced for the most volatile OC fraction evaporated at 310 °C. The pro-inflammatory responses to the PM sampled in the Marienborg tunnel were higher than in the Hell road tunnel, and this is presumably related to lower temperatures, which cause less evaporation of OC and higher amounts of OC attached to PM. Interestingly, the lower pro-inflammatory activity of ultrafine PM from the Marienborg tunnel sampled after road surface cleaning occurred in parallel to a reduction of OC. Conceivably, the role of OC is attributed to PAHs that are important constituents of OC in ambient PM. The PAHs seem to have an important role in PM-induced inflammation and adverse effects in the airways and cardiovascular system [26, 72]. However, further studies are needed to establish the causal relationship between OC/PAHs and the potential of the traffic-related PM to induce pro-inflammatory responses.

Conclusions, methodological considerations and further perspectives

The present study shows that traffic-related PM sampled in two road tunnels induced marked pro-inflammatory responses in bronchial epithelial lung cells in vitro, with fine PM as the most potent. The pro-inflammatory responses induced by particles from the stone materials used in the pavement were substantially lower than that of the road tunnel PM on an equal mass basis, suggesting that the stone material alone is not a major determinant for the high reactivity of traffic-related PM. However, we cannot discount the possibility that combinative effect between combustion PM and mineral, or other PM constituents, contribute to the reactivity of PM. Importantly, our characterization of the PM samples is limited and should be extended with further analyses of particle morphology, as well as analyses of metals and specific chemical groups to elucidate their potential role. Further studies are also warranted regarding the potential role of combustion PM for the pro-inflammatory outcome of road tunnel PM, alone and in combination with stone materials. Notably, the ratio between OC and total PM mass seemed important for the PM-induced pro-inflammatory responses. This ratio can be influenced by various factors including temperatures, OC sources and the amount of stone particles from abrasion of road pavement. Whether the OC originates from fuel combustion, bitumen from asphalt, or from tires, may have important implications for which preventive measures are most relevant from a health perspective. It will be crucial to further substantiate any possible causal relationship between the OC and pro-inflammatory outcome for road tunnel PM both in in vitro and in vivo. Finally, it should be noted that that particle dosimetry and environmental concentrations have to be taken into account to examine whether the in vitro findings of road tunnel PM are relevant for assessment of the actual impact on human health.

Materials and methods

Materials

The cell culture medium LHC-9, DMEM:F12 and Trypsin–EDTA were bought from Gibco, Thermo Fisher Scientific, Waltham, MA, USA. The cell culture flasks were obtained from Nunc A/S, Roskilde, Denmark, while the cell culture plates were from Corning, NY 14831 USA. PureCol collagen was from Advanced BioMatrix, Inc, CA, USA. The Cytotoxicity Detection Kit using lactate dehydrogenase (LDH) activity was bought from Merck KGaA, Darmstadt, Germany. AlamarBlue™ Cell Viability Reagent and the sandwich enzyme-linked immunosorbent assay (ELISA) cytosets for CXCL8 and IL-6 were purchased from Invitrogen, Thermo Fisher Scientific, Waltham, MA, USA, while IL-1α and IL-1β DuoSet were from R&D Systems, Inc, Minneapolis, MN, USA. The Endotoxin Quant kit were from Thermo Fisher Scientific, Waltham, MA USA. For measurements of acellular ROS 5,5-dimethyl-1-pyrroline-N-oxide (DMPO), Dulbecco’s PBS; hydrogen peroxide (H2O2), dithiothreitol (DTT) and ultrapure H2O were purchased from Merck KGaA, Darmstadt, Germany. Whatman TE 38 filter was from (Whatman, Maidstone, Kent, UK). Other chemicals were purchased from commercial sources at the highest purity available.

Description of road tunnels

In the present study, coarse PM samples (between 10 and 2.5 µm), fine PM samples (between 2.5 and 0.18 µm) and ultrafine PM samples (below 0.18 µm) were collected inside two different road tunnels in Trondheim, Norway during late winter season (March 2019). The two tunnels, Marienborg tunnel and Hell tunnel, were paved with SMA16 asphalt containing the stone materials rhomb porphyry and quartz diorite, respectively, also referred to as rock aggregates. The rhomb porphyry has a ball mill value AN = 7.5 and Los Angeles value LA = 16.4 which means it can be used as aggregates in a surface course on roads with annual average daily traffic (AADT) 5000–15,000 according to existing requirements. The quartz diorite has a ball mill value AN = 5.2 and Los Angeles value LA = 10.3 which means it can be used as a surface course on roads with AADT > 15,000. Both tunnels have one tube with one lane in each direction and a ventilation system consisting of large mechanical fans mounted on the ceiling. The principle is to ventilate the tunnels longitudinally in the dominant wind direction, but this can be hindered by the opposing traffic that could affect the flow of air and keep the pollution in the middle of the tunnel. The Marienborg tunnel was opened in 2010 and is located in Trondheim on RV706 and has a speed limit of 60 km/h. It is 1840 m long with a 3-way roundabout at the northern end and is aligned in the north–south direction. The PM sampling was performed at an emergency bay beside the traffic lane inside the road tunnel, approximately 780 m from the southern entrance. The AADT is approximately 7000 vehicles per 24 h, with 10% heavy vehicles. The proportion of vehicles using studded tires was around 25% in the period PM was sampled. The average temperature in the tunnel during the whole sampling period was 7.3 °C, and the relative humidity was 83.2%. The Hell tunnel was opened in 1995 and is located outside Trondheim on EV6. It has a speed limit of 80 km/h and is 3924 m long with a grade of 2.3%. The PM sampling was performed in an emergency parking area inside the tunnel approximately 2140 m from the southern entrance. The AADT is approximately 16,000 vehicles each 24 h, with 17% of heavy vehicles. The percentage of vehicles with studded tires was approximately 40% in the sampling period. The average temperature in the tunnel was 14.9 °C, and the relative humidity 60.5%.

Sampling and preparation of road tunnel PM

Coarse, fine, and ultrafine particles were sampled with a vacuum pump and a high-volume cascade impactor sampler. Particles were sampled in the tunnels during dry and humid road surface conditions, and before and after cleaning of the road surface and side areas in the tunnels. Sampling was performed 10 days after a comprehensive washing of the tunnel, without any other cleaning in between before the PM sampling, and was performed at a flow rate of 900 L/h in 10–12 h periods. Visual status of road surface was registered (humid and dry conditions). To assess the effect of cleaning an ordinary routine road surface cleaning was performed immediately after sampling of PM from the non-cleaned surface. Such cleanings are done in the same way in both tunnels by the same contractor, using a RotorClean system with high pressure water and suction. A rod with high pressure nozzles is used to move the road dust from the 0.5 m lower wall, side areas and curbsides for the machine to be able to collect the road dust with the high vacuum suction. For PM sampling we used a high-volume cascade impactor sampler developed by Demokritou et al. [73], with a multistage round slit nozzle, and polyurethane foam (PUF) used as impaction substrate for the coarse and fine PM, and a Whatman TE 38 filter for the ultrafine PM. Pre-weighted clean PUFs and filters were stored in closed containers in a dark room before use. After PM collection, both PUFs and filters were sealed in the original container and stored in refrigerator until further analysis. PUFs and filters were placed in a conditioned room with steady temperature and humidity for 24 h and weighed on an analytical balance.

The collected PM samples were extracted from the PUFs and filters in 50 mL plastic tubes by adding about 25 mL methanol, followed by thorough mixing on a vortexer and 2–5 min sonication in a water bath (Elmasonic S) to dislodge the particles from the filters. The particle suspensions were then transferred to a glass flask and the extraction was repeated until most of the particles was removed from the PUFs/filters. Most of the methanol was removed by a rotary evaporator before the PM solutions were transferred to pre-weighted glass flasks and kept at 25 °C to remove the rest of the methanol. The weights of the extracted particles were determined gravimetrically [14]. The mean efficiency was 50%. The particle samples were suspended in pyrogen-free sterile water to a concentration of 10 mg/mL and sonicated for 5 min before freezing at − 20 °C. Before use the PM were mixed well and re-sonicated for 1 min.

Characterization of road tunnel PM

The PM samples were characterized by hydrodynamic size distributions, endotoxin content, the ability to generate acellular ROS, and the of content EC and OC.

Hydrodynamic size distribution

The hydrodynamic sizes of tunnel PM samples were determined by using a CPS Disc Centrifuge model DC 24000 (Inventech Benelux, Oosterhout, the Netherlands https://www.inventech.nl).

Measurements of endotoxins

The endotoxin content of all the PM samples (100 µg/mL) was measured by the Pierce Chromogen Endotoxin Quant kit (LAL-method), using an endotoxin-standard from 0.01 to 0.1 endotoxin units (EU)/mL. The kit’s procedure was followed with minor alterations. As the turbidity of the particles would interfere with the assay, the plate was centrifuged at 3220×g to pellet the particles immediately after the stop solution was added to the reaction mixture. The supernatants (100 µL) were transferred to a clean 96-well plate and the optical densities (OD) at 405 nm were measured. The average absorbance of the blank replicates was subtracted from the average absorbance of all individual standards and sample replicates to calculate mean absorbance. A standard curve was prepared without the blank, R2 was ≥ 0.98. The formulated standard curve (linear regression) was used to determine the endotoxin concentration of each sample.

Acellular reactive oxygen species/oxidative potential

Acellular ROS was measured by OPESR on a MiniScope MS 400 (MT MagnetTech Gmbh, Berlin, Germany) and by OPDTT on a regular spectrophotometer. OPESR is a spectrophotometric method using DMPO as a spin trap in the presence of H2O2, measuring hydroxyl radical generation (OH∙) by the PM samples, and is mainly sensitive to metal-mediated ROS formation by Fenton-type-reactions [74]. The radical generation was measured in triplicates on the samples (25 µg) after 15 min, with ultrapure water used as control and Diesel Oil Fly Ash (DOFA) as a positive control. The DTT assay measures the presence of ROS via formation of DTT disulfide due to transfer of electrons from DTT to oxygen, based on the average of two duplicate readings, resulting in a value expressed as nmol DTT consumed per min per μg sample [10]. In the DTT analyses we used 5 µg of each sample, the signal was measured after 0, 10, 20 and 30 min.

OC and EC analyses

The OC and EC content of tunnel PM samples were analyzed by a method adopted from NIOSH temperature protocol allowing to distinguish different temperature fractions (i.e., volatility and molecular weight as previously described [75,76,77] using thermal optical analyzer (Sunset Laboratory, Inc.). For analysis, 5 µL aliquots of PM solutions (10 mg/ml) were placed onto pre-baked quartz filters (600 °C, overnight) and dried on a hot plate set to 50 °C for 7 min. Laser transmittance at 658 nm was used to distinguish pyrolyzed OC from EC. The temperature profile began with a 10 s ambient temperature step followed with 5 steps; 300 °C for 75 s, 500 °C for 75 s, 600 °C for 75 s, 700 °C for 75 s, and 870 °C for 120 s, in a helium atmosphere. This was followed by a cooling step to 525 °C for 45 s. Five additional temperature steps were followed in a 5% oxygen in helium atmosphere; 550 °C for 45 s, 625 °C for 45 s, 700 °C for 45 s, 775 °C for 45 s, and 890 °C for 120 s. Lastly, a calibration gas of 5% methane/helium was added as an internal standard for 110 s. The total analysis time was 885 s. To test for a potential occurrence of carbonate, which could interfere with OC measurements, samples were treated with HCl. No loss of carbon was observed indicating no significant amounts of carbonates.

Preparation, size distribution and mineral composition of stone materials

Two stone materials, rhomb porphyry and quartz diorite, were included in the present study, and correspond to the materials used in the pavement of the Marienborg and Hell road tunnels, respectively. The preparation of these stone particle samples with sizes < 10 µm has been described in a recent study [44]. Before use, the particles were suspended in pyrogen-free sterile water at a concentration of 10 mg/mL and sonicated for one min in a water bath (Elmasonic S). The mineralogical and elemental composition of the samples has previously been described [44]. The rhomb porphyry sample contained the highest amount of feldspar minerals, in the form of K-feldspar and plagioclase, in addition to smaller amounts of hornblende, chlorite, calcite, quartz and muscovite. In comparison, the quartz diorite sample contain larger amounts of quartz, in addition to K-feldspar, plagioclase, epidote, chlorite and muscovite. The elemental composition and endotoxin content were quite similar between the samples [44].

Cell culture and exposure conditions

HBEC3-KT cells (passage 4-35, ATCC CRL-4051) were maintained in LHC-9 medium in collagen-coated flasks (PureCol) in a humified atmosphere at 37 °C with 5% CO2. The cell culture medium was replaced every second day as described in a previous study [9]. For experiments, the cells were seeded on pre-coated 6-well plates at a density of 170.000 cells/cm2 three days before exposure. The medium was changed to serum-free DMEM:F12 one day before exposure. The cells were exposed to the PM samples for 20 h in DMEM:F12. This early timepoint is often chosen for assessing acute toxicity in cell culture studies [9, 78].We also performed studies at 40 h, with similar results for the road tunnel PM (data not shown). Cell culture media were collected and centrifuged at 300×g to remove cellular debris and followed by centrifugation at 10.000×g to remove floating particles. The samples were then frozen at − 80 °C awaiting analysis.

Cytokine analysis

After thawing the frozen samples, the concentrations of CXCL8, IL-6, IL-1α and IL-1β were determined by ELISA according to the manufacturer’s guidelines. Absorbance was measured and quantified by a plate reader (TECAN Sunrise, Männedorf, Switzerland) equipped with a dedicated software (Magellan V 1.10), as previously described.

Cell viability

Cell viability was measured using the AlamarBlue assay and release of LDH. In the AlamarBlue assay the metabolic activity was analyzed as described in the producer’s manual after 20 h of exposure using a CLARIOstar plate reader (BMG LABTECH, Ortenberg; Germany). The LDH concentration was measured in media after 20 h according to the manufacturer’s guideline (Roche, Germany).

Statistical analyses

Statistical analyses were performed by using GraphPad Prism software (version 9.0 Inc., San Diego, CA). Statistically significant differences were determined using either one-way repeated measures analysis of variance (ANOVA) with Tukey’s multiple comparisons test or two-way repeated measures ANOVA with Dunnett’s or Tukey’s multiple comparison tests, depending on the experimental design. A repeated measures design, in which all values belonging to the same experiment were defined as a subject, was used to reduce the impact of between-experiment variation not due to the experimental treatment. Experiments were performed in 3–7 independent biological replicates. Based on the evaluation of QQ-plots several data were log-transformed to ensure normality. Geisser–Greenhouse correction was used to account for non-sphericity in the data. The correlations between particle size, endotoxin content, acellular ROS and organic content and the ability to induce pro-inflammatory responses in HBEC3-KT were determined using Pearson’s correlation coefficient. To assess the correlation between particle size and pro-inflammatory responses, area under the curve (AUC) values were calculated from either the full-size distribution curves, or from specific segments of the curves, using the trapezoid method.

Availability of data and materials

The datasets used in the presents study are available from the corresponding author upon reasonable request.

Abbreviations

AUC:

Area under curve

CXCL8:

Chemokine CXC-motif ligand 8

DEP:

Diesel exhaust particles

DTT:

Dithiothreitol

EC:

Elemental carbon

ESR:

Electro spin resonance

HBEC3-KT:

Human bronchial epithelial cells

IL:

Interleukin

LDH:

Lactate dehydrogenase

LPS:

Lipopolysaccharide

OC:

Organic carbon

OP:

Oxidative potential

PAH:

Polycyclic aromatic hydrocarbons

PM:

Particulate matter

ROS:

Reactive oxygen species

SEM:

Standard error of mean

TNFα:

Tumor necrosis factor alpha

References

  1. Landrigan PJ, Fuller R, Acosta NJR, Adeyi O, Arnold R, Basu NN, et al. The Lancet Commission on pollution and health. Lancet. 2018;391(10119):462–512.

    Article  PubMed  Google Scholar 

  2. Kelly FJ, Fussell JC. Air pollution and airway disease. Clin Exp Allergy. 2011;41(8):1059–71.

    Article  CAS  PubMed  Google Scholar 

  3. Schwarze PE, Ovrevik J, Låg M, Refsnes M, Nafstad P, Hetland RB, et al. Particulate matter properties and health effects: consistency of epidemiological and toxicological studies. Hum Exp Toxicol. 2006;25(10):559–79.

    Article  CAS  PubMed  Google Scholar 

  4. Lee YG, Lee PH, Choi SM, An MH, Jang AS. Effects of Air Pollutants on Airway Diseases. Int J Environ Res Public Health. 2021;18(18):9905.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  5. Sayan M, Mossman BT. The NLRP3 inflammasome in pathogenic particle and fibre-associated lung inflammation and diseases. Part Fibre Toxicol. 2016;13(1):51.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  6. Donaldson K, Borm PJ, Castranova V, Gulumian M. The limits of testing particle-mediated oxidative stress in vitro in predicting diverse pathologies; relevance for testing of nanoparticles. Part Fibre Toxicol. 2009;6:13.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  7. Arias-Pérez RD, Taborda NA, Gómez DM, Narvaez JF, Porras J, Hernandez JC. Inflammatory effects of particulate matter air pollution. Environ Sci Pollut Res Int. 2020;27(34):42390–404.

    Article  PubMed  Google Scholar 

  8. Turner MD, Nedjai B, Hurst T, Pennington DJ. Cytokines and chemokines: at the crossroads of cell signalling and inflammatory disease. Biochim Biophys Acta. 2014;1843(11):2563–82.

    Article  CAS  PubMed  Google Scholar 

  9. Låg M, Skuland T, Godymchuk A, Nguyen THT, Pham HLT, Refsnes M. Silica nanoparticle-induced cytokine responses in BEAS-2B and HBEC3-KT cells: significance of particle size and signalling pathways in different lung cell cultures. Basic Clin Pharmacol Toxicol. 2018;122(6):620–32.

    Article  PubMed  CAS  Google Scholar 

  10. Janssen NA, Yang A, Strak M, Steenhof M, Hellack B, Gerlofs-Nijland ME, et al. Oxidative potential of particulate matter collected at sites with different source characteristics. Sci Total Environ. 2014;472:572–81.

    Article  CAS  PubMed  Google Scholar 

  11. Steenhof M, Gosens I, Strak M, Godri KJ, Hoek G, Cassee FR, et al. In vitro toxicity of particulate matter (PM) collected at different sites in the Netherlands is associated with PM composition, size fraction and oxidative potential–the RAPTES project. Part Fibre Toxicol. 2011;8:26.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  12. Forman HJ, Finch CE. A critical review of assays for hazardous components of air pollution. Free Radical Biol Med. 2018;117:202–17.

    Article  CAS  Google Scholar 

  13. Øvrevik J. Oxidative potential versus biological effects: a review on the relevance of cell-free/abiotic assays as predictors of toxicity from airborne particulate matter. Int J Mol Sci. 2019;20(19):4772.

    Article  PubMed Central  CAS  Google Scholar 

  14. Gerlofs-Nijland ME, Dormans JA, Bloemen HJ, Leseman DL, John A, Boere F, et al. Toxicity of coarse and fine particulate matter from sites with contrasting traffic profiles. Inhal Toxicol. 2007;19(13):1055–69.

    Article  CAS  PubMed  Google Scholar 

  15. Thomson EM, Breznan D, Karthikeyan S, MacKinnon-Roy C, Charland JP, Dabek-Zlotorzynska E, et al. Cytotoxic and inflammatory potential of size-fractionated particulate matter collected repeatedly within a small urban area. Part Fibre Toxicol. 2015;12:24.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  16. Thomson EM, Breznan D, Karthikeyan S, MacKinnon-Roy C, Vuong NQ, Dabek-Zlotorzynska E, et al. Contrasting biological potency of particulate matter collected at sites impacted by distinct industrial sources. Part Fibre Toxicol. 2016;13(1):65.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  17. Onishi T, Honda A, Tanaka M, Chowdhury PH, Okano H, Okuda T, et al. Ambient fine and coarse particles in Japan affect nasal and bronchial epithelial cells differently and elicit varying immune response. Environ Pollut. 2018;242(Pt B):1693–701.

    Article  CAS  PubMed  Google Scholar 

  18. Ramgolam K, Favez O, Cachier H, Gaudichet A, Marano F, Martinon L, et al. Size-partitioning of an urban aerosol to identify particle determinants involved in the proinflammatory response induced in airway epithelial cells. Part Fibre Toxicol. 2009;6:10.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  19. Thorpe A, Harrison RM. Sources and properties of non-exhaust particulate matter from road traffic: a review. Sci Total Environ. 2008;400(1–3):270–82.

    Article  CAS  PubMed  Google Scholar 

  20. Piscitello A, Bianco C, Casasso A, Sethi R. Non-exhaust traffic emissions: sources, characterization, and mitigation measures. Sci Total Environ. 2021;766:144440.

    Article  CAS  PubMed  Google Scholar 

  21. Bendtsen KM, Gren L, Malmborg VB, Shukla PC, Tunér M, Essig YJ, et al. Particle characterization and toxicity in C57BL/6 mice following instillation of five different diesel exhaust particles designed to differ in physicochemical properties. Part Fibre Toxicol. 2020;17(1):38.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  22. Herrick RF, McClean MD, Meeker JD, Zwack L, Hanley K. Physical and chemical characterization of asphalt (bitumen) paving exposures. J Occup Environ Hyg. 2007;4(Suppl 1):209–16.

    Article  CAS  PubMed  Google Scholar 

  23. Fiebig M, Wiartalla A, Holderbaum B, Kiesow S. Particulate emissions from diesel engines: correlation between engine technology and emissions. J Occup Med Toxicol. 2014;9(1):6.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  24. Gustafsson M, Blomqvist G, Gudmundsson A, Dahl A, Swietlicki E, Bohgard M, et al. Properties and toxicological effects of particles from the interaction between tyres, road pavement and winter traction material. Sci Total Environ. 2008;393(2–3):226–40.

    Article  CAS  PubMed  Google Scholar 

  25. Kupiainen KJ, Tervahattu H, Räisänen M, Mäkelä T, Aurela M, Hillamo R. Size and Composition of Airborne Particles from Pavement Wear, Tires, and Traction Sanding. Environ Sci Technol. 2005;39(3):699–706.

    Article  CAS  PubMed  Google Scholar 

  26. Holme JA, Brinchmann BC, Refsnes M, Låg M, Øvrevik J. Potential role of polycyclic aromatic hydrocarbons as mediators of cardiovascular effects from combustion particles. Environ Health. 2019;18(1):74.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  27. Keet CA, Keller JP, Peng RD. Long-term coarse particulate matter exposure is associated with asthma among children in medicaid. Am J Respir Crit Care Med. 2018;197(6):737–46.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  28. Ge E, Lai K, Xiao X, Luo M, Fang Z, Zeng Y, et al. Differential effects of size-specific particulate matter on emergency department visits for respiratory and cardiovascular diseases in Guangzhou. China Environ Pollut. 2018;243(Pt A):336–45.

    Article  CAS  PubMed  Google Scholar 

  29. Brunekreef B, Forsberg B. Epidemiological evidence of effects of coarse airborne particles on health. Eur Respir J. 2005;26(2):309–18.

    Article  CAS  PubMed  Google Scholar 

  30. Schins RP, Lightbody JH, Borm PJ, Shi T, Donaldson K, Stone V. Inflammatory effects of coarse and fine particulate matter in relation to chemical and biological constituents. Toxicol Appl Pharmacol. 2004;195(1):1–11.

    Article  CAS  PubMed  Google Scholar 

  31. Sandström T, Cassee FR, Salonen R, Dybing E. Recent outcomes in European multicentre projects on ambient particulate air pollution. Toxicol Appl Pharmacol. 2005;207(2 Suppl):261–8.

    Article  PubMed  CAS  Google Scholar 

  32. Dick CA, Singh P, Daniels M, Evansky P, Becker S, Gilmour MI. Murine pulmonary inflammatory responses following instillation of size-fractionated ambient particulate matter. J Toxicol Environ Health A. 2003;66(23):2193–207.

    Article  CAS  PubMed  Google Scholar 

  33. Monn C, Becker S. Cytotoxicity and induction of proinflammatory cytokines from human monocytes exposed to fine (PM2.5) and coarse particles (PM10–2.5) in outdoor and indoor air. Toxicol Appl Pharmacol. 1999;155(3):245–52.

    Article  CAS  PubMed  Google Scholar 

  34. Hetland RB, Cassee FR, Refsnes M, Schwarze PE, Låg M, Boere AJ, et al. Release of inflammatory cytokines, cell toxicity and apoptosis in epithelial lung cells after exposure to ambient air particles of different size fractions. Toxicol In Vitro. 2004;18(2):203–12.

    Article  CAS  PubMed  Google Scholar 

  35. Hetland RB, Cassee FR, Låg M, Refsnes M, Dybing E, Schwarze PE. Cytokine release from alveolar macrophages exposed to ambient particulate matter: heterogeneity in relation to size, city and season. Part Fibre Toxicol. 2005;2:4.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  36. Jalava PI, Salonen RO, Pennanen AS, Sillanpää M, Hälinen AI, Happo MS, et al. Heterogeneities in inflammatory and cytotoxic responses of RAW 264.7 macrophage cell line to urban air coarse, fine, and ultrafine particles from six European sampling campaigns. Inhal Toxicol. 2007;19(3):213–25.

    Article  CAS  PubMed  Google Scholar 

  37. Val S, Martinon L, Cachier H, Yahyaoui A, Marfaing H, Baeza-Squiban A. Role of size and composition of traffic and agricultural aerosols in the molecular responses triggered in airway epithelial cells. Inhal Toxicol. 2011;23(11):627–40.

    Article  CAS  PubMed  Google Scholar 

  38. Becker S, Soukup JM, Sioutas C, Cassee FR. Response of human alveolar macrophages to ultrafine, fine, and coarse urban air pollution particles. Exp Lung Res. 2003;29(1):29–44.

    Article  CAS  PubMed  Google Scholar 

  39. Guillot L, Medjane S, Le-Barillec K, Balloy V, Danel C, Chignard M, et al. Response of human pulmonary epithelial cells to lipopolysaccharide involves Toll-like receptor 4 (TLR4)-dependent signaling pathways: evidence for an intracellular compartmentalization of TLR4. J Biol Chem. 2004;279(4):2712–8.

    Article  CAS  PubMed  Google Scholar 

  40. Chaudhuri N, Paiva C, Donaldson K, Duffin R, Parker LC, Sabroe I. Diesel exhaust particles override natural injury-limiting pathways in the lung. Am J Physiol Lung Cell Mol Physiol. 2010;299(2):L263–71.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  41. Hussein T, Johansson C, Karlsson H, Hansson H-C. Factors affecting non-tailpipe aerosol particle emissions from paved roads: on-road measurements in Stockholm, Sweden. Atmos Environ. 2008;42(4):688–702.

    Article  CAS  Google Scholar 

  42. Furusjö E, Sternbeck J, Cousins AP. PM(10) source characterization at urban and highway roadside locations. Sci Total Environ. 2007;387(1–3):206–19.

    Article  PubMed  CAS  Google Scholar 

  43. Amato F, Cassee FR, Denier van der Gon HA, Gehrig R, Gustafsson M, Hafner W, et al. Urban air quality: the challenge of traffic non-exhaust emissions. J Hazard Mater. 2014;275:31–6.

    Article  CAS  PubMed  Google Scholar 

  44. Grytting VS, Refsnes M, Øvrevik J, Halle MS, Schönenberger J, van der Lelij R, et al. Respirable stone particles differ in their ability to induce cytotoxicity and pro-inflammatory responses in cell models of the human airways. Part Fibre Toxicol. 2021;18(1):18.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  45. Hetland RB, Refsnes M, Myran T, Johansen BV, Uthus N, Schwarze PE. Mineral and/or metal content as critical determinants of particle-induced release of IL-6 and IL-8 from A549 cells. J Toxicol Environ Health A. 2000;60(1):47–65.

    Article  CAS  PubMed  Google Scholar 

  46. Ovrevik J, Myran T, Refsnes M, Låg M, Becher R, Hetland RB, et al. Mineral particles of varying composition induce differential chemokine release from epithelial lung cells: importance of physico-chemical characteristics. Ann Occup Hyg. 2005;49(3):219–31.

    CAS  PubMed  Google Scholar 

  47. Becher R, Hetland RB, Refsnes M, Dahl JE, Dahlman HJ, Schwarze PE. Rat lung inflammatory responses after in vivo and in vitro exposure to various stone particles. Inhal Toxicol. 2001;13(9):789–805.

    Article  CAS  PubMed  Google Scholar 

  48. Lawrence S, Sokhi R, Ravindra K, Mao H, Prain HD, Bull ID. Source apportionment of traffic emissions of particulate matter using tunnel measurements. Atmos Environ. 2013;77:548–57.

    Article  CAS  Google Scholar 

  49. Gaga EO, Arı A, Akyol N, Üzmez Ö, Kara M, Chow JC, et al. Determination of real-world emission factors of trace metals, EC, OC, BTEX, and semivolatile organic compounds (PAHs, PCBs and PCNs) in a rural tunnel in Bilecik. Turkey Sci Total Environ. 2018;643:1285–96.

    Article  CAS  PubMed  Google Scholar 

  50. Johansson C, Norman M, Gidhagen L. Spatial & temporal variations of PM10 and particle number concentrations in urban air. Environ Monit Assess. 2007;127(1–3):477–87.

    Article  CAS  PubMed  Google Scholar 

  51. Kupiainen K, Ritola R, Stojiljkovic A, Pirjola L, Malinen A, Niemi J. Contribution of mineral dust sources to street side ambient and suspension PM10 samples. Atmos Environ. 2016;147:178–89.

    Article  CAS  Google Scholar 

  52. Candeias C, Vicente E, Tomé M, Rocha F, Ávila P, Alves C. Geochemical, Mineralogical and Morphological Characterisation of Road Dust and Associated Health Risks. Int J Environ Res Public Health. 2020;17(5):1563.

    Article  CAS  PubMed Central  Google Scholar 

  53. Rodríguez S, Querol X, Alastuey A, Viana Ma-M, Alarcón M, Mantilla E, et al. Comparative PM10–PM2.5 source contribution study at rural, urban and industrial sites during PM episodes in Eastern Spain. Sci Total Environ. 2004;328(1):95–113.

    Article  PubMed  CAS  Google Scholar 

  54. Manousakas M, Diapouli E, Belis CΑ, Vasilatou V, Gini M, Lucarelli F, et al. Quantitative assessment of the variability in chemical profiles from source apportionment analysis of PM10 and PM2.5 at different sites within a large metropolitan area. Environ Res. 2021;192:110257.

    Article  CAS  PubMed  Google Scholar 

  55. Longhin E, Pezzolato E, Mantecca P, Holme JA, Franzetti A, Camatini M, et al. Season linked responses to fine and quasi-ultrafine Milan PM in cultured cells. Toxicol In Vitro. 2013;27(2):551–9.

    Article  CAS  PubMed  Google Scholar 

  56. Manoli E, Kouras A, Karagkiozidou O, Argyropoulos G, Voutsa D, Samara C. Polycyclic aromatic hydrocarbons (PAHs) at traffic and urban background sites of northern Greece: source apportionment of ambient PAH levels and PAH-induced lung cancer risk. Environ Sci Pollut Res Int. 2016;23(4):3556–68.

    Article  CAS  PubMed  Google Scholar 

  57. Castro LM, Pio CA, Harrison RM, Smith DJT. Carbonaceous aerosol in urban and rural European atmospheres: estimation of secondary organic carbon concentrations. Atmos Environ. 1999;33(17):2771–81.

    Article  CAS  Google Scholar 

  58. Chow JC, Watson JG. Review of PM2.5 and PM10 apportionment for fossil fuel combustion and other sources by the chemical mass balance receptor model. Energy Fuels. 2002;16(2):222–60.

    Article  CAS  Google Scholar 

  59. Sparks C, Reponen T, Grinshpun SA, Ryan P, Yermakov M, Simmons M, et al. Concentration gradient patterns of traffic and non-traffic-generated fine and coarse aerosol particles. J Environ Health. 2014;76(6):122–9.

    CAS  PubMed  PubMed Central  Google Scholar 

  60. Godec R, Jakovljević I, Davila S, Šega K, Bešlić I, Rinkovec J, et al. Air pollution levels near crossroads with different traffic density and the estimation of health risk. Environ Geochem Health. 2021;43(10):3935–52.

    Article  CAS  PubMed  Google Scholar 

  61. Altuwayjiri A, Soleimanian E, Moroni S, Palomba P, Borgini A, De Marco C, et al. The impact of stay-home policies during Coronavirus-19 pandemic on the chemical and toxicological characteristics of ambient PM(2.5) in the metropolitan area of Milan, Italy. Sci Total Environ. 2021;758:143582.

    Article  CAS  PubMed  Google Scholar 

  62. Wu C, Huang XHH, Ng WM, Griffith SM, Yu JZ. Inter-comparison of NIOSH and IMPROVE protocols for OC and EC determination: implications for inter-protocol data conversion. Atmos Meas Tech. 2016;9(9):4547–60.

    Article  CAS  Google Scholar 

  63. Wang B, Lau YS, Huang Y, Organ B, Chuang HC, Ho SSH, et al. Chemical and toxicological characterization of particulate emissions from diesel vehicles. J Hazard Mater. 2021;405:124613.

    Article  CAS  PubMed  Google Scholar 

  64. Nitter TB, Hilt B, Svendsen KVH, Buhagen M, Jørgensen RB. Association between exposure to different stone aggregates from asphalt and blood coagulability: a human exposure chamber study. Sci Total Environ. 2021;778:146309.

    Article  CAS  PubMed  Google Scholar 

  65. Nitter TB, Hilt B, Svensen KVH, Buhagen M, Dahlman HJ, Øvrevik J, Refsnes MA, Jørgensen RB. Inflammatory effects of exposure to different stone types used in Norwegian asphalt. In: Guangyu Cao SBH, Kim MK, Schild PG, editor. Proceedings of the 17th international healthy buildings conference 21–23 June 2021. Oslo, Norway: SINTEF Academic Press; 2021. p. 538–45.

  66. Moazami TN, Hilt B, Sørås K, Svendsen KVH, Dahlman HJ, Refsnes M, et al. Short-term exposure to stone minerals used in asphalt affect lung function and promote pulmonary inflammation among healthy adults. Scand J Work Environ Health. 2022;4023

  67. Gerlofs-Nijland ME, Bokkers BGH, Sachse H, Reijnders JJE, Gustafsson M, Boere AJF, et al. Inhalation toxicity profiles of particulate matter: a comparison between brake wear with other sources of emission. Inhal Toxicol. 2019;31(3):89–98.

    Article  CAS  PubMed  Google Scholar 

  68. Grytting VS, Chand P, Låg M, Øvrevik J, Refsnes M. The pro-inflammatory effects of combined exposure to diesel exhaust particles and mineral particles in human bronchial epithelial cells. Part Fibre Toxicol. 2022;19(1):14.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  69. Denby BR, Sundvor I, Johansson C, Pirjola L, Ketzel M, Norman M, et al. A coupled road dust and surface moisture model to predict non-exhaust road traffic induced particle emissions (NORTRIP). Part 1: road dust loading and suspension modelling. Atmos Environ. 2013;77:283–300.

    Article  CAS  Google Scholar 

  70. Fussell JC, Franklin M, Green DC, Gustafsson M, Harrison RM, Hicks W, et al. A Review of road traffic-derived non-exhaust particles: emissions, physicochemical characteristics, health risks, and mitigation measures. Environ Sci Technol. 2022;56(11):6813–35.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  71. Øvrevik J, Refsnes M, Låg M, Holme JA, Schwarze PE. Activation of proinflammatory responses in cells of the airway mucosa by particulate matter: oxidant- and non-oxidant-mediated triggering mechanisms. Biomolecules. 2015;5(3):1399–440.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  72. Låg M, Øvrevik J, Refsnes M, Holme JA. Potential role of polycyclic aromatic hydrocarbons in air pollution-induced non-malignant respiratory diseases. Respir Res. 2020;21(1):299.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  73. Demokritou P, Kavouras IG, Ferguson ST, Koutrakis P. Development of a high volume cascade impactor for toxicological and chemical characterization studies. Aerosol Sci Technol. 2002;36(9):925–33.

    Article  CAS  Google Scholar 

  74. Hellack B, Quass U, Nickel C, Wick G, Schins RP, Kuhlbusch TA. Oxidative potential of particulate matter at a German motorway. Environ Sci Process Impacts. 2015;17(4):868–76.

    Article  CAS  PubMed  Google Scholar 

  75. Bautista AT, Pabroa PCB, Santos FL, Quirit LL, Asis JLB, Dy MAK, et al. Intercomparison between NIOSH, IMPROVE_A, and EUSAAR_2 protocols: finding an optimal thermal–optical protocol for Philippines OC/EC samples. Atmos Pollut Res. 2015;6(2):334–42.

    Article  Google Scholar 

  76. Nespor B, Cochran R, Jeong H, Bowman F, Delene D, Kozliak E, et al. Occurrence of both nonvolatile and semivolatile carbonaceous air particulate markers using thermal desorption-pyrolysis-gas chromatography-mass spectrometry. Atmos Environ. 2021;246:118058.

    Article  CAS  Google Scholar 

  77. Braun A, Huggins FE, Kubátová A, Wirick S, Maricq MM, Mun BS, et al. Toward distinguishing woodsmoke and diesel exhaust in ambient particulate matter. Environ Sci Technol. 2008;42(2):374–80.

    Article  CAS  PubMed  Google Scholar 

  78. Skuland T, Låg M, Gutleb AC, Brinchmann BC, Serchi T, Øvrevik J, et al. Pro-inflammatory effects of crystalline- and nano-sized non-crystalline silica particles in a 3D alveolar model. Part Fibre Toxicol. 2020;17(1):13.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

Download references

Acknowledgements

We thank Thomas Lamo and Bjørn Hoven, Norwegian Public Roads Administration for financing paving with asphalt in the Marienborg tunnel, and also for administrative support for sampling of PM in the tunnels. Arne Vidar Sjønøst, Department of Industrial Economy and Technology Management, Norwegian University of Science and Technology is acknowledged for participating in the sampling of PM in the tunnels.

Funding

The work was performed as part of the PrevenTAP-project funded by the Research Council of Norway, through the Better Health-program (Grant no. 260381).

Author information

Authors and Affiliations

  1. Division of Climate and Environmental Health, Department of Air Quality and Noise, Norwegian Institute of Public Health, PO Box 222, 0213, Skøyen, Oslo, Norway

    Tonje Skuland, Vegard Sæter Grytting, Marit Låg, Jørn A. Holme & Magne Refsnes

  2. Department of Industrial Economics and Technology Management, Norwegian University of Science and Technology, NTNU, Trondheim, Norway

    Rikke Bræmming Jørgensen

  3. Norwegian Public Roads Administration, Trondheim, Norway

    Brynhild Snilsberg

  4. National Institute for Public Health and the Environment – RIVM, PO Box 1, 3720 BA, Bilthoven, The Netherlands

    Daan L. A. C. Leseman & Flemming R. Cassee

  5. Institute for Risk Assessment Sciences, Utrecht University, Utrecht, The Netherlands

    Flemming R. Cassee

  6. Department of Chemistry, University of North Dakota, Grand Forks, ND, USA

    Alena Kubátová & Jessica Emond

  7. Division of Climate and Environmental Health, Norwegian Institute of Public Health, PO Box 222, 0213, Skøyen, Oslo, Norway

    Johan Øvrevik

  8. Department of Biosciences, Faculty of Mathematics and Natural Sciences, University of Oslo, PO Box 1066, 0316, Blindern, Oslo, Norway

    Johan Øvrevik

Authors
  1. Tonje Skuland
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Vegard Sæter Grytting
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Marit Låg
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Rikke Bræmming Jørgensen
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Brynhild Snilsberg
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Daan L. A. C. Leseman
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Alena Kubátová
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Jessica Emond
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Flemming R. Cassee
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Jørn A. Holme
    View author publications

    You can also search for this author in PubMed Google Scholar

  11. Johan Øvrevik
    View author publications

    You can also search for this author in PubMed Google Scholar

  12. Magne Refsnes
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

TS performed all the experiments and contributed to all experimental planning and design in collaboration with VSG, ML, JAH, JO and MR at NIPH. TS performed the data analysis and statistics. RJ and BS performed the sampling of the particles in Trondheim. DL and FC was responsible for the particle extraction together with TS and VSG, and also the size distribution and ROS analyses. The analyses of organics content were performed by AK and JE. All authors were involved in writing the manuscript with TS, VSG, ML, JAH, JO and MR as main responsible. All authors read and approved the final manuscript.

Corresponding author

Correspondence to Tonje Skuland.

Ethics declarations

Ethics for approval and consent to participate

Not Applicable.

Consent for publication

Not Applicable.

Competing interests

The authors declare that they have no competing interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary Information

Additional file 1: Fig. S1

. Geographical location of the Marienborg and Hell road tunnels in the Trondheim area in Norway.

Additional file 2: Fig. S2

. Hydrodynamic size distribution based on particle number of coarse, fine and ultrafine PM sampled in the Marienborg and Hell tunnels. A) Marienborg PM dry road surface conditions; B) Marienborg PM humid road surface conditions; C) Hell PM dry road surface conditions; D) Hell PM humid road surface conditions. The hydrodynamic size distributions were determined by the Disc centrifugation method as described in Materials and Methods.

Additional file 3: Fig. S3

. Correlation plots between potential for generation of acellular ROS as measured by ESR (OPESR ) and by DTT (OPDTT) methods. The correlation was determined using Pearson’s correlation coefficient.

Additional file 4: Fig. S4

. Cytokine responses in HBEC3-KT cells after exposure to PM samples from two road tunnels before and after road surface cleaning. The cells were exposed to PM samples from the Marienborg and Hell tunnel during humid and dry road surface conditions, respectively, and compared to PM sampled after road surface cleaning. The cells were exposed to 100 µg/mL (10.4 µg/cm2) for 20 h. The cytokine release was analysed by ELISA. A) CXCL8; B) IL-6; C) IL-1α; D) IL-1β. The data represent the mean +/- SEM of 3-5 experiments. # Significantly different from PM samples before cleaning p < 0.05.

Additional file 5: Fig. S5

. Correlation matrix between CXCL8, IL-6, IL-1α and IL-1β release. The cytokine release was determined after an exposure to 100 µg/mL (10.4 µg/cm2) of all the particles (n = 5). The correlation was determined using Pearson’s correlation coefficients (r is listed in the matrix).

Additional file 6: Table S6

. Correlation plots between particle characteristics and CXCL8 responses. The CXCL8 release at an exposure concentration of 100 µg/mL (10.4 µg/cm2) (n =5) was compared to hydrodynamic size distributions of the particles, endotoxin levels, generation of acellular ROS as measured by ESR (OPESR ) and by DTT (OPDTT) method, ; and the levels of OC as measured at 310 ºC; at 475 ºC; at 615 ºC; at 870 ºC, and at temperature from 310°C-870°C in the PM samples. The correlations were determined using Pearson’s correlation coefficients.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Skuland, T., Grytting, V.S., Låg, M. et al. Road tunnel-derived coarse, fine and ultrafine particulate matter: physical and chemical characterization and pro-inflammatory responses in human bronchial epithelial cells. Part Fibre Toxicol 19, 45 (2022). https://doi.org/10.1186/s12989-022-00488-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s12989-022-00488-5

Keywords

Particle and Fibre Toxicology

ISSN: 1743-8977

Contact us