Skip to main content
  • Research article
  • Open access
  • Published:

Identification and characterization of a novel stress-responsive outer membrane protein Lip40 from Actinobacillus pleuropneumoniae

Abstract

Background

Actinobacillus pleuropneumoniae, a Gram-negative bacterium, is the causative agent of porcine pleuropneumonia, a highly contagious and often fatal disease. Because current vaccines confer limited protection against A. pleuropneumoniae infection, the development of more effective vaccines is urgently required. The identification of immunogenic and protective antigens, such as an outer-membrane lipoprotein, will advance this purpose.

Results

Sixty putative lipoproteins were predicted from the genomic sequence of A. pleuropneumoniae using multiple algorithms. Here, we focused on the characteristics of the putative lipoprotein Lip40 from A. pleuropneumoniae strain SLW01 (serovar 1). Lip40 shares sequence similarity with many bacterial lipoproteins, and the structural prediction of Lip40 suggests that it is similar to A. pleuropneumoniae TbpB. The N-terminus of Lip40 contains an interesting tandemly repeated sequence, Q(E/D/P)QPK. Real-time RT–PCR indicated that the expression of lip40 was significantly upregulated at 42 °C, at 16 °C, and under anaerobic conditions. Recombinant Lip40 (rLip40) produced in Escherichia coli BL21(DE3) was specifically recognized by porcine convalescent serum directed against A. pleuropneumoniae. Lip40 was confirmed to localize at the bacterial outer membrane, and its expression was significantly stimulated when A. pleuropneumoniae was cultured under various stress conditions. Lip40 also protected 75 % of mice from fatal virulent A. pleuropneumoniae infection.

Conclusions

The immunogenic outer-membrane protein Lip40 is stress responsive, protects mice against infection, and might be a virulence determinant. Further investigation of Lip40 should expedite vaccine development and provide insight into the pathogenesis of A. pleuropneumoniae.

Background

Actinobacillus pleuropneumoniae is the etiological agent of porcine pleuropneumonia, a severe and often fatal respiratory disease of swine, which is associated with significant economic losses in industrialized pig production worldwide [1]. To date, 16 serovars of A. pleuropneumoniae have been identified [2]. The pathogenesis of A. pleuropneumoniae infection is associated with several virulence factors, including but not limited to exotoxins. Other factors, such as capsular polysaccharides, lipopolysaccharides, adhesins, proteases, outer-membrane proteins, and transcriptional regulators, are also reported to be involved in its pathogenesis [3–6].

Bacterial lipoproteins are a set of membrane-associated proteins characterized by a conserved lipid-modified cysteine, which play important roles in bacterial physiological processes [7]. The involvement of lipoproteins in the infection processes of many pathogens has received wide attention [8]. Lipoproteins play a key role in the bacterium’s adhesion to the host cell, are involved in antibiotic resistance, and regulate the host immune response [8]. They have been reported to be pathogen-associated molecular patterns, which are recognized and captured by Toll-like receptors or other pattern-recognition receptors, inducing the activation of the immune cells and initiating the inflammatory processes [9]. Many immunogenic bacterial lipoproteins have been developed as candidate vaccines [8].

A putative lipoprotein, Lip40, containing the tandemly repeated sequence Q(E/D/P)QPK was observed among the 60 putative lipoproteins predicted from the published genomic sequence of A. pleuropneumoniae strain JL03. The lip40 gene from an A. pleuropneumoniae field isolate, SLW01 (serovar 1), was cloned and characterized, including its sequence features, predicted structure, immunogenicity, subcellular localization, expression after stimulation, and protective efficiency in mice, extending our understanding of this lipoprotein.

Methods

Bacterial strains, plasmids, primers, and growth conditions

The bacterial strains, plasmids, and primers used in this work are listed in Table 1. The primers used in this study were synthesized by Sangon Biotech (Shanghai, China). Escherichia coli strains were cultured in Luria–Bertani broth, supplemented with the appropriate antibiotic (50 μg/ml ampicillin). Actinobacillus pleuropneumoniae strains were cultured in tryptic soy broth (TSB) or on tryptic soy agar (TSA) (Becton, Dickinson & Company, Franklin Lakes, New Jersey, USA), supplemented with 10 μg/ml nicotinamide adenine dinucleotide (Sigma-Aldrich Co., Ltd, St. Louis, Missouri, USA). For the anaerobic treatment, A. pleuropneumoniae was cultured under oxygen-free conditions (85 % N2, 10 % H2, and 5 % CO2) (Forma Anaerobic System, Thermo Fisher Scientific, Marietta, USA).

Table 1 Strains, plasmids, and primers used in this study

Prediction of A. pleuropneumoniae lipoproteins

The previously sequenced and annotated A. pleuropneumoniae strain JL03 was selected to identify the lipoproteins of A. pleuropneumoniae [10]. The programs used for lipoprotein prediction were: (i) ScanProsite (http://prosite.expasy.org/) [11]; (ii) DOLOP (http://www.mrc-lmb.cam.ac.uk/genomes/dolop/) [12]; (iii) SignalP 4.1 (http://www.cbs.dtu.dk/services/SignalP/) [13]; (iv) PrediSi (http://www.predisi.de/) [14]; (v) Phobius (http://phobius.binf.ku.dk/) [15]; and (vi) LipoP 1.0 (http://www.cbs.dtu.dk/services/LipoP/) [16]. Possible lipoproteins were then subjected to a ‘majority vote’ selection procedure to exclude any false positive lipoproteins [17].

Cloning and bioinformatic analysis of Lip40 protein

The genomic DNA was isolated from A. pleuropneumoniae SLW01 as described previously [18]. Specific primers for the lip40 gene were designed according to the conserved features of the lip40 sequence in the complete A. pleuropneumoniae genome. The lip40 gene was cloned by PCR, and the product was inserted into pMD18-T (Takara, Dalian, China), generating the plasmid pMD-lip40. The fragment inserted into pMD-lip40 was sequenced in both directions. The sequence features were analyzed with LipoP 1.0. A multiple sequence alignment was constructed with BioEdit (version 7.0). The structure of Lip40 was predicted by with the SWISS-model method (http://swissmodel.expasy.org/), and the Lip40 protein was superimposed onto the N lobe and C lobe of TbpB (Protein Data Bank [PDB]: 3HOL) with WinCoot.

Reverse transcription–real-time quantitative PCR (RT–qPCR)

Total RNA was extracted from an A. pleuropneumoniae culture with the RNeasy Mini kit (Qiagen, Shanghai, China), treated with DNase I (Invitrogen, CA, USA), and reverse-transcribed into cDNA with the Omniscript® RT Kit (Qiagen), according to the manufacturer’s protocol. The mRNA levels of A. pleuropneumoniae cultured under different conditions were measured with a SYBR Green-based method. The rluC gene was used as the internal control. qPCR was performed in a 20 μl reaction volume containing 10 μl of 2 × SYBR Green Realtime PCR Master Mix (Toyobo, Osaka, Japan), 1 μl of cDNA, 0.5 μl each of the forward and reverse primers (10 μmol/l), and 8 μl of dH2O. An ABI 7500 Sequence Detection System was used for the amplification reactions, and qPCR was performed in triplicate. The 2–ΔΔCt method was used to calculate the relative expression of the lip40 gene.

Expression and purification of Lip40 from E. coli

The mature protein-coding sequence of Lip40 was cloned from the A. pleuropneumoniae genomic DNA using primers P7 and P8 (Table 1). The PCR products were then digested with BamHI/HindIII and ligated into the prokaryotic expression vector pGEX-KG [19], generating the recombinant plasmid pGEX-lip40. Recombinant Lip40 (rLip40) was then expressed from pGEX-lip40 in E. coli BL21(DE3). rLip40 was collected from the E. coli lysate and purified with a glutathione (GST)–Sepharose 4B column (Amersham Biosciences, Buckinghamshire, England). The immunoreactivity of the purified rLip40 was verified with western blotting, using porcine convalescent serum directed against A. pleuropneumoniae as the primary antibody.

Production of polyclonal antibodies against rLip40

Two female New Zealand white rabbits (~2.5 kg; purchased from the Centre for Disease Control and Prevention [CDC] of Hubei Province, China) were used to produce polyclonal antibodies directed against rLip40. All the animal experiments in the present study were approved by the Animal Experiment Committee of Central China Normal University. Each rabbit was first injected intradermally with purified rLip40 (650 μg). The purified protein (0.5 ml) was emulsified with an equal volume of Freund’s complete adjuvant (Sigma-Aldrich, USA). Animals were subsequently injected three times, at 15-day intervals, with the same immunogen emulsified with incomplete Freund’s adjuvant with the same regimen. Antisera were collected 10 days after the third booster immunization.

The titers and specificity of the polyclonal antibodies were evaluated with a Lip40 enzyme-linked immunosorbent assay (ELISA). Briefly, flat-bottomed 96-well polystyrene ELISA plates (Haimen Shengbang, Haimen, China) were coated with 0.17 μg of purified rLip40 diluted in 100 μl of coating buffer (50 mM sodium carbonate, pH 9.6). The coated plates were washed three times with phosphate-buffered saline (PBS) plus 0.05 % Tween 20 (PBST), blocked at 37 °C for 1 h with blocking buffer (5 % skimmed milk in PBST), and then washed three times with PBST. For the ELISA, 2 μl samples and 198 μl of PBST were added to each well in the first line of wells in the plate and 100 μl of PBST was added to the rest of the wells. The samples were diluted and incubated at 37 °C for 40 min. After four washes with PBST, 100 μl of horseradish peroxidase (HRP)-conjugated secondary antibody (Southern Biotechnology Associates, Birmingham, USA), diluted 1:5000 in PBST, was added to each well, and the plates were incubated at 37 °C for 30 min. After five washes, 100 μl of 3,3′,5,5′-tetramethylbenzidine color development solution (Biotime Biotech, Haimen, China) was added to each well. The plates were incubated at room temperature in the dark for approximately 10 min, and the catalytic reaction was then stopped with 50 μl of 1 % SDS. The optical density was read at 630 nm (OD630) in an ELISA reader (PowerWave XS, Bio-Tek, Winooski, USA).

Subcellular localization of Lip40

The subcellular fractionation of A. pleuropneumoniae was performed as described previously [20]. In brief, 1 l of bacterial culture was pelleted and resuspended in 10 ml of solution A (0.2 M Tris–HCl [pH 8.0], 1 M sucrose, 1 mM EDTA). Lysozyme was then added to the cell suspension to a final concentration of 1 mg/ml, vortexed, and incubated at room temperature for 5 min. dH2O (40 ml) was added to the swirling mixture before it was placed on ice. The cells were centrifuged at 200,000 × g for 45 min at 4 °C. The supernatant contained the periplasmic fraction. The pellet was resuspended in 7.5 ml of ice-cold solution B (10 mM Tris–HCl [pH 7.5], 5 mM EDTA, 0.2 mM DTT), supplemented with 50 μl of DNase (1 mg/ml). The cells were broken by two passes at 108 Pa. The unbroken cells were pelleted by centrifugation at 4000 × g for 10 min at 4 °C. The supernatant was then centrifuged at 280,000 × g for 4 h at 4 °C. The supernatant contained the cytoplasmic fraction and the pellet contained the crude membranes, which were collected separately. The crude membrane pellet was resuspended in 9 ml of solution C (50 mM Tris–HCl [pH 8.0], 2 % [v/v] Triton X-100, 10 mM MgCl2), and centrifuged at 85,000 × g for 30 min at 4 °C. The supernatant contained the cytoplasmic membrane fraction. The pellet, containing the outer membrane, was washed in 1 ml of solution C, centrifuged at 85,000 × g for 20 min at 4 °C, washed three times with 500 μl of dH2O, and stored at −20 °C. The extracellular proteins were precipitated from the filtered culture supernatant with trichloroacetic acid at 4 °C overnight, followed by centrifugation (17,700 × g, 1 h, 4 °C), and were washed six times with 1 ml of 96 % ethanol. The pellet was dried and redissolved in 400 μl of solution D (7 M urea, 2 M thiourea, 4 % CHAPS [w/v], 30 mM Tris–HCl, [pH 8.0]), and stored at −20 °C. The subcellular localization of the Lip40 protein was determined with western blotting using rabbit hyperimmune anti-rLip40 serum (1:400) as the primary antibody.

Expression of Lip40 protein under stress conditions

Actinobacillus pleuropneumoniae, cultured in TSB under normal conditions (aerobically at 37 °C) for 3 h, was divided into four equal parts and incubated under anaerobic condition, or at 42 °C, 16 °C, 37 °C for another 3 h, respectively . The cells were harvested by centrifugation, and the outer-membrane fractions were extracted as described above. The concentration of all outer-membrane samples prepared under different culture conditions were determined with a BCA protein assay kit (GenStar BioSolutions, Beijing, China). Equal volumes of the samples (66 μg) were separated with 12 % sodium dodecyl sulfate polyacrylamide gel electrophoresis and transferred to a nitrocellulose membrane. Western blotting was performed with rabbit hyperimmune anti-rLip40 serum (1:400) as the primary antibody. The expression of Lip40 was determined in triplicate. The expression levels of Lip40 in the outer-membrane samples were determined according to the density of the bands, with the Quantity One software.

Vaccination and challenge of mice

The protective efficacy of rLip40 was tested in a mouse vaccination/challenge model. Forty-eight 6-week-old specific-pathogen-free BALB/c mice (CDC, Hubei Province, China) were randomly allocated to four groups of 12 animals. ApxI toxin was obtained from the supernatant of A. pleuropneumoniae strain 13039 (serovar 10) cultures, as described previously [21], and inactivated with 0.4 % formaldehyde. Group 1 was inoculated with PBS and used as the negative control; group 2 was vaccinated with 150 μg of rLip40; group 3 was vaccinated with 150 μg of inactivated ApxI; and group 4 was vaccinated with a commercial trivalent inactivated vaccine (containing serovars 1, 2, and 7; purchased from Wuhan Keqian Biotech, China). For groups 2 and 3, the antigens were emulsified separately with complete Freund’s adjuvant for the first immunization, and with incomplete Freund’s adjuvant for the booster immunization. Serum samples were collected before each immunization and before the mice were challenged, and assayed with the Lip40-ELISA, as described above, and an ApxI-ELISA, as described previously [22]. Each group was intraperitoneally challenged with 2.5 × 106 colony-forming units of log-phase A. pleuropneumoniae SLW01 14 days after the second vaccination. The numbers of surviving mice were recorded every day for 5 days after the challenge.

Results

Sixty putative A. pleuropneumoniae lipoproteins

With the ‘majority vote’ approach [17], 60 of the 89 identified putative lipoproteins from A. pleuropneumoniae JL03 were predicted as lipoproteins, including some previously reported lipoproteins, such as TbpB (gene locus APJL_0250) [23] and PalA (gene locus APJL_0317) [24], as well as several previously reported putative lipoproteins [25], indicating that our prediction method and results are reliable. The sequence characteristics of the 60 lipoproteins are listed in Additional file 1: Table S1. Putative lipoprotein Lip40, containing a special N-terminal tandemly repeated sequence, was further investigated in the present study.

Lip40 has a conserved lipoprotein domain

The lip40 gene from A. pleuropneumoniae SLW01 was cloned and sequenced (GenBank accession number: KP119767). The Lip40 protein was predicted to have the typical characteristics of lipoproteins with the LipoP 1.0 program, and contains the recognition sequence for signal peptidase II (LVITA↓CGSKN). The lipid modification site of Lip40 was predicted to be located at Cys20. A multiple sequence alignment of Lip40 and lipoproteins from Aggregatibacter actinomycetemcomitans and Cardiobacterium hominis showed that Lip40 is homologous to those lipoproteins (similarity > 33 %; Additional file 2: Figure S1). It also displayed similarity with several transferrin-binding proteins (Tbps) from pathogenic bacteria (similarity > 34 %; Additional file 3: Figure S2). The multiple sequence alignment showed that Lip40 is homologous to both the N- and C-lobes of A. pleuropneumoniae TbpB (Fig. 1a). Structural prediction revealed that the Lip40 protein consists of an eight-stranded β barrel accompanied by a domain made up of four β strands (Fig. 1b). Superimposition of Lip40 onto the C lobe and N lobe of TbpB (PDB: 3HOL) indicated that they have high structural similarity (Fig. 1c and d). We also noted that Lip40 contains a tandemly repeated sequence, Q(E/D/P)QPK, at its N-terminus. Actinobacillus pleuropneumoniae strain SLW01 Lip40 has nine tandem repeats. The numbers of repeats in the Lip40 homologues from other A. pleuropneumoniae strains were also calculated, and according to the available genome sequences of these strains, the repeat numbers differ among the different strains (8–27) (Table 2).

Fig. 1
figure 1

Sequence alignment and structural prediction of Lip40. a Sequence alignment of A. pleuropneumoniae Lip40 and the N- and C-lobes of A. pleuropneumoniae TbpB (PDB: 3HOL). b Overall structure of Lip40 protein (blue). The structure consists of an eight-stranded β barrel accompanied by a domain made up of four β strands. c Superimposition of Lip40 onto the TbpB N lobe (orange). d Superimposition of Lip40 onto the TbpB C lobe (pink)

Table 2 Numbers of tandem repeats in different A. pleuropneumoniae strains

Transcription of lip40 is stimulated by stress

The expression of the lip40 gene was analyzed under in vitro growth conditions mimicking the environment during infection, including anaerobic conditions and high temperature (42 °C). The expression of lip40 at low temperature (16 °C) was also evaluated. As shown in Fig. 2, the transcription of the lip40 gene was significantly upregulated under stress relative to its transcription under normal culture conditions (37 °C, aerobic), and heat shock most strongly increased lip40 expression (45-fold). These results indicate that lip40 is responsive to temperature and anaerobic stress, and might be involved in the bacterial infection process.

Fig. 2
figure 2

Transcription changes in the A. pleuropneumoniae lip40 gene under different conditions. Relative expression of the lip40 gene during stimulation with 42 °C, anaerobic conditions, or 16 °C was normalized to that of lip40 expressed under normal culture conditions. The fold changes in lip40 expression are shown. Error bars indicate standard errors. Double asterisks indicate P < 0.01, calculated with Student’s t test

rLip40 is immunoreactive

To express the Lip40 protein, the lip40 gene without the signal peptide was cloned from A. pleuropneumoniae SLW01, restricted, and ligated into the prokaryotic expression plasmid pGEX-KG. Escherichia coli cells containing pGEX-lip40 were induced with isopropyl-β-D-thiogalactopyranoside. The recombinant Lip40 protein was confirmed to be present in the soluble supernatant of the cell lysate with SDS-PAGE, as shown in Fig. 3a. The purification of rLip40 is shown in Fig. 3b. Western blotting revealed a band with a molecular weight of ~56 kDa for rLip40, whereas no signal was detectable for GST (Fig. 3c). This result confirms that porcine convalescent serum directed against A. pleuropneumoniae recognized and bound specifically to the rLip40 protein.

Fig. 3
figure 3

Expression (a), purification (b), and western blotting analysis (c) of rLip40 protein. Protein samples were separated with 12 % SDS-PAGE and blotted onto nitrocellulose membrane. The membrane was sequentially incubated with porcine convalescent serum directed against A. pleuropneumoniae and HRP-labeled goat anti-porcine IgG secondary antibody, and the color was developed with a 3,3′-diaminobenzidine (DAB) peroxidase substrate (Tiangen, Beijing, China). M, prestained protein ladder (Fermentas, Vilnius, Lithuania); lane 1, GST; lane 2, rLip40

Lip40 elicits a strong humoral immune response in rabbits

Rabbits were immunized with four doses of purified rLip40 by intradermal injection. Serum samples were collected before each immunization and before euthanasia and the antibodies against rLip40 were tested with an ELISA, to verify the generation of a Lip40-specific immune response in rabbits. Lip40-specific antibodies appeared two weeks after the first immunization, and then increased quickly after the second and third injections (Additional file 4: Figure S3A). At the end of the immunization regimen, titration of the rabbit sera (at 55 days) showed the highest reactivity, with an increase of up to 2 × 105-fold (Additional file 4: Figure S3B), suggesting that rLip40 stimulates a strong antibody response in rabbits. The same amount of purified GST was used to coat 96-well plates, and antibody directed against GST was evaluated with a GST-ELISA, as described for the Lip40-ELISA. The GST-specific IgG titer in the hyperimmune serum was only 1:3200 (Additional file 4: Figure S3B), much lower than that of the Lip40-specific antibody. Therefore, it appears that Lip40 played a major role in the elicitation of rabbit antibodies directed against the GST–Lip40 fusion protein.

Lip40 is located in the outer membrane

Although bioinformatic analysis showed that Lip40 is located on the outer membrane, experimental verification was required (data not shown). Subcellular fractions of A. pleuropneumoniae cells were extracted carefully, including the cytoplasmic proteins, periplasmic proteins, cytoplasmic membrane proteins, outer-membrane proteins (OM), and extracellular proteins (Fig. 4a). A band corresponding to Lip40 (~30 kDa) was observed in the outer-membrane fraction with western blotting, as shown in Fig. 4b. No Lip40 signal was observed in the other subcellular fractions. Our results confirm that Lip40 localizes to the outer bacterial membrane.

Fig. 4
figure 4

Subcellular localization of Lip40. a SDS-PAGE analysis of A. pleuropneumoniae subcellular fractions. b Western blotting analysis. Subcellular fractions were separated with 12 % SDS-PAGE, blotted onto nitrocellulose membranes, and incubated with rabbit anti-rLip40 polyclonal antibody. Color was developed with a DAB peroxidase substrate (Tiangen). M, prestained protein ladder; lane 1, cytoplasmic proteins (CP); lane 2, periplasmic proteins (PP); lane 3, cytoplasmic membrane proteins (CM); lane 4, outer-membrane proteins (OM); lane 5, extracellular proteins (EP). The nitrocellulose membranes displayed a band with a molecular weight of ~30 kDa in the outer-membrane fraction, indicating that Lip40 is located on the outer membrane. No signal was detected in the other subcellular fractions

Enhanced expression of Lip40 protein under stress

To test whether the expression of Lip40 protein in the outer-membrane fraction is stimulated by stress conditions, A. pleuropneumoniae cells cultured under anaerobic condition or high and low temperatures were collected, and their outer-membrane fractions were extracted and quantified. Equal amounts of samples (66 μg) were separated by SDS-PAGE, and the expression levels were determined with western blotting (Fig. 5). In general, the expression of Lip40 protein was enhanced under stress conditions, especially at 42 °C, and the Lip40 signal increased more than three-fold under heat shock. These results indicate that both the transcription of the lip40 gene and the translation of the Lip40 protein increased in response to stress. Therefore, Lip40 may be involved in the adaptation of A. pleuropneumoniae to environmental changes.

Fig. 5
figure 5

Expression changes of Lip40 protein in the outer-membrane fraction. a SDS-PAGE. Actinobacillus pleuropneumoniae outer-membrane samples were extracted from cells after they were treated with heating, anaerobic conditions, or cold stimulation, or with normal conditions. Equal amounts (66 μg) of outer-membrane proteins were analyzed with SDS-PAGE. b Western blotting analysis. The procedures were as described above. M, prestained protein ladder; lane 1, high temperature (42 °C); lane 2, anaerobic conditions; lane 3, low temperature (16 °C); lane 4, normal conditions (37 °C). c Intensity of the bands was quantified with the Quantity One software. Relative expression levels were obtained by normalizing the intensity of stress-treated samples to that of untreated samples in each assay. Double asterisks (**) indicate a significant difference (P < 0.01) compared with the stress-treated samples (Student’s t test)

Lip40 is protective in mice

Serum samples from mice immunized with different antigens were analyzed with ELISAs (Fig. 6). All the mice were negative for rLip40 and ApxI before immunization. Serum samples from the mice inoculated with PBS (group 1) or ApxI (group 3) showed no detectable antibody against Lip40 during this study (Fig. 6a), whereas the sera from group 2, vaccinated with rLip40, were positive for Lip40 antibodies 14 days after the first vaccination, and the titer had increased by the second vaccination. The Lip40 antibody titers in group 2 were significantly higher than those in the other groups (P <0.01, Student’s t test; Fig. 6a). The mice in groups 1 and 2 were also free of ApxI antibodies, but the mice in group 3 showed a significantly stronger ApxI antibody response than the other groups (P < 0.01). As shown in Fig. 6b, group 4, vaccinated with commercial vaccine, also showed a strong ApxI antibody response after vaccination. The mice were challenged with virulent A. pleuropneumoniae SLW01 14 days after the second immunization, and the survival rates were recorded for 5 days after challenge (Fig. 7). No mice inoculated with PBS survived the challenge, and the protective efficacies of rLip40, ApxI, and commercial vaccine were 75 % (9/12), 100 % (12/12), and 91.7 % (11/12), respectively. These results show that rLip40 protected more than half the animals (75 %) from the challenge. Thus, the protective efficacy of rLip40 was significantly higher than that of the negative control (0 %), indicating that rLip40 is immunoprotective and provides effective protection against A. pleuropneumoniae infection in mice.

Fig. 6
figure 6

Humoral responses in mice. Antibodies against rLip40 (a) and ApxI (b) were evaluated at different time points with ELISAs. ELISA titers are expressed as the logarithm (log10) of the reciprocal of the highest dilution of serum with an OD630 value above that of the cutoff value for each mouse. Double asterisks (**) indicate P < 0.01, calculated with Student’s t test

Fig. 7
figure 7

Protection conferred by different antigens against A. pleuropneumoniae challenge in mice (survival rates). Numbers of surviving mice in each group was monitored for 5 days after challenge. Numbers of surviving mice did not change 72 h after infection

Discussion

Lipoproteins are required for the virulence of some pathogenic bacteria. They play a variety of roles in host–pathogen interactions, from surface adhesion and the initiation of inflammatory processes to the translocation of virulence factors into the host cytoplasm [8]. However, the pathogenesis of A. pleuropneumoniae lipoproteins has rarely been examined. Most such studies have focused on their immunogenicity and vaccine potential, including studies of TbpB [26–28] and OmlA [29, 30]. These proteins were shown to be immunoprotective and important vaccine components (PleuroStar APP, Novartis Animal Health Inc., Switzerland). However, PalA was reported to inhibit the protective efficacy of ApxI and ApxII [24].

In the present study, a putative lipoprotein, Lip40, which contains an interesting tandemly repeated sequence, Q(E/D/P)QPK, was characterized. Previous studies have demonstrated the relationship between coding tandem repeat (CTR) sequences and virulence in Chlamydia pecorum [31, 32]. CTRs at the incA locus encode a variable number of repeated motifs, and the number of repetitions in incA is related to the virulence of C. pecorum strains [32]. Similarly, the number of tandem repeats in Lip40 varies within its homologues in different serovars of A. pleuropneumoniae strains. Therefore, the possible role of Lip40 in bacterial pathogenesis requires further characterization.

Oxygen deprivation and high temperature are two common stresses that A. pleuropneumoniae encounters during infection [5, 33]. Transcriptional profiles under anaerobic conditions [33] and acute disease [34] have been analyzed with microarray chips to discover potential virulence factors, which are usually considered to be upregulated under in vivo conditions or in a mimicked infection. This genome-wide transcriptional screening of the differentially expressed genes of A. pleuropneumoniae revealed no Lip40 homologue. In this study, we confirmed that Lip40 is upregulated at both the transcriptional and translational levels by stress. The mechanisms involved in the adaptive responses of A. pleuropneumoniae remain to be investigated. The effects of cold shock were tested as a typical environmental stress. Reports have suggested that the autumn–winter transition is one of the outbreak peaks of porcine pleuropneumonia in China [35], and the environmental temperature is always far lower than the normal growth temperature for mesophilic bacteria during this period. It is possible that the adaptation of A. pleuropneumoniae to cold stress is responsible for the infections observed at this time of year. Our results indicate that both the transcriptional and translational levels of Lip40 were elevated at 16 °C compared with those at 37 °C, suggesting that Lip40 is a factor in the responsiveness of A. pleuropneumoniae to low temperature. Therefore, we hypothesize that Lip40 is a potential virulence factor and involved in pathogen–environment and/or pathogen–host interactions.

Commercial vaccines, including whole-cell bacterins and second-generation subunit vaccines, only confer partial protection against A. pleuropneumoniae infection [29]. Therefore, it is essential that more effective vaccines be developed. The identification of conserved immunogenic antigens, especially outer-membrane-located proteins, will advance this purpose. Several outer-membrane-associated proteins have been verified separately as vaccine components or candidate vaccines with various investigation methods, including TbpB, OmlA, OmpP2, OmpA, and OmpW [25, 36, 37]. In addition to their location on the outer bacterial membrane, many lipoproteins of Gram-negative bacteria are considered to be efficient candidate vaccines [38]. The putative outer-membrane proteins and lipoproteins have been identified in the genome of Pasteurella multocida, a great step forward in the development of a protective vaccine against fowl cholera [39, 40]. Similar research was undertaken in A. pleuropneumoniae, and several lipoproteins were cloned and their protective efficacies were investigated [25]. Here, we report a putative lipoprotein, Lip40, confirmed to be an outer-membrane-localized stress-responsive factor. Purified rLip40 induced strong antibody responses when it was administered to rabbits. Mice vaccinated with rLip40 displayed a survival rate of 75 %, which was significantly higher than that of the negative control group (0 %), indicating that rLip40 can be used as a component of vaccine against A. pleuropneumoniae infection. Our results provide additional confirmation of the importance of bacterial outer-membrane lipoproteins in vaccine development.

Conclusions

A putative lipoprotein, Lip40, from A. pleuropneumoniae was characterized and confirmed to be both immunogenic and localized to the outer membrane. Its expression is responsive to temperature and anaerobic stimuli. Lip40 was also shown to be a potential protective antigen for vaccine development. Further investigation of the roles of Lip40 in A. pleuropneumoniae infection should provide insight into the pathogenesis of this bacterium.

References

  1. Fenwick B, Henry S. Porcine pleuropneumonia. J Am Vet Med Assoc. 1994;204:1334–40.

    CAS  Google Scholar 

  2. Foote SJ, Bossé JT, Bouevitch AB, Langford PR, Young NM, Nash JH. The complete genome sequence of Actinobacillus pleuropneumoniae L20 (serotype 5b). J Bacteriol. 2008;190:1495–6.

    Article  CAS  Google Scholar 

  3. Chiers K, De Waele T, Pasmans F, Ducatelle R, Haesebrouck F. Virulence factors of Actinobacillus pleuropneumoniae involved in colonization, persistence and induction of lesions in its porcine host. Vet Res. 2010;41:65.

    Article  Google Scholar 

  4. Li L, Xu Z, Zhou Y, Li T, Sun L, Chen H, et al. Analysis on Actinobacillus pleuropneumoniae LuxS regulated genes reveals pleiotropic roles of LuxS/AI-2 on biofilm formation, adhesion ability and iron metabolism. Microb Pathog. 2011;50:293–302.

    Article  CAS  Google Scholar 

  5. Xie F, Zhang Y, Li G, Zhou L, Liu S, Wang C. The ClpP protease is required for the stress tolerance and biofilm formation in Actinobacillus pleuropneumoniae. PLoS One. 2013;8:e53600.

    Article  CAS  Google Scholar 

  6. Zhou Y, Li L, Chen Z, Yuan H, Chen H, Zhou R. Adhesion protein ApfA of Actinobacillus pleuropneumoniae is required for pathogenesis and is a potential target for vaccine development. Clin Vaccine Immunol. 2013;20:287–94.

    Article  CAS  Google Scholar 

  7. Remans K, Vercammen K, Bodilis J, Cornelis P. Genome-wide analysis and literature-based survey of lipoproteins in Pseudomonas aeruginosa. Microbiology. 2010;156:2597–607.

    Article  CAS  Google Scholar 

  8. Kovacs-Simon A, Titball RW, Michell SL. Lipoproteins of bacterial pathogens. Infect Immun. 2011;79:548–61.

    Article  CAS  Google Scholar 

  9. Brightbill HD, Libraty DH, Krutzik SR, Yang RB, Belisle JT, Bleharski JR, et al. Host defense mechanisms triggered by microbial lipoproteins through toll-like receptors. Science. 1999;285:732–6.

    Article  CAS  Google Scholar 

  10. Xu Z, Zhou Y, Li L, Zhou R, Xiao S, Wan Y, et al. Genome biology of Actinobacillus pleuropneumoniae JL03, an isolate of serotype 3 prevalent in China. PLoS One. 2008;3:e1450.

    Article  Google Scholar 

  11. Wu CH, Apweiler R, Bairoch A, Natale DA, Barker WC, Boeckmann B, et al. The Universal Protein Resource (UniProt): an expanding universe of protein information. Nucleic Acids Res. 2006;34:D187–91.

    Article  CAS  Google Scholar 

  12. Babu MM, Priya ML, Selvan AT, Madera M, Gough J, Aravind L, et al. A database of bacterial lipoproteins (DOLOP) with functional assignments to predicted lipoproteins. J Bacteriol. 2006;188:2761–73.

    Article  CAS  Google Scholar 

  13. Bendtsen JD, Nielsen H, von Heijne G, Brunak S. Improved prediction of signal peptides: SignalP 3.0. J Mol Biol. 2004;340:783–95.

    Article  Google Scholar 

  14. Hiller K, Grote A, Scheer M, Münch R, Jahn D. PrediSi: prediction of signal peptides and their cleavage positions. Nucleic Acids Res. 2004;32:W375–9.

    Article  CAS  Google Scholar 

  15. Käll L, Krogh A, Sonnhammer EL. A combined transmembrane topology and signal peptide prediction method. J Mol Biol. 2004;338:1027–36.

    Article  Google Scholar 

  16. Juncker AS, Willenbrock H, Von Heijne G, Brunak S, Nielsen H, Krogh A. Prediction of lipoprotein signal peptides in Gram-negative bacteria. Protein Sci. 2003;12:1652–62.

    Article  CAS  Google Scholar 

  17. Tjalsma H, van Dijl JM. Proteomics-based consensus prediction of protein retention in a bacterial membrane. Proteomics. 2005;5:4472–82.

    Article  CAS  Google Scholar 

  18. Prideaux CT, Pierce L, Krywult J, Hodgson AL. Protection of mice against challenge with homologous and heterologous serovars of Actinobacillus pleuropneumoniae after live vaccination. Curr Microbiol. 1998;37:324–32.

    Article  CAS  Google Scholar 

  19. Guan KL, Dixon JE. Eukaryotic proteins expressed in Escherichia coli: an improved thrombin cleavage and purification procedure of fusion proteins with glutathione S-transferase. Anal Biochem. 1991;192:262–7.

    Article  CAS  Google Scholar 

  20. Thein M, Sauer G, Paramasivam N, Grin I, Linke D. Efficient subfractionation of gram-negative bacteria for proteomics studies. J Proteome Res. 2010;9:6135–47.

    Article  CAS  Google Scholar 

  21. Devenish J, Rosendal S. Identification of the heat-labile hemolysin of Actinobacillus pleuropneumoniae serotype 1. Can J Vet Res. 1989;53:251–4.

    CAS  Google Scholar 

  22. Liu J, He Q, Chen H. Cloning, expression of apxI gene of Actinobacillus pleuropneumoniae and development of ELISA. Sci Agric Sin. 2003;5:578–82.

    Google Scholar 

  23. Tj K, Lee J. Cloning and expression of genes encoding transferrin-binding protein A and B from Actinobacillus pleuropneumoniae serotype 5. Protein Expr Purif. 2006;45:235–40.

    Article  Google Scholar 

  24. van den Bosch H, Frey J. Interference of outer membrane protein PalA with protective immunity against Actinobacillus pleuropneumoniae infections in vaccinated pigs. Vaccine. 2003;21:3601–7.

    Article  Google Scholar 

  25. Chen X, Xu Z, Li L, Chen H, Zhou R. Identification of conserved surface proteins as novel antigenic vaccine candidates of Actinobacillus pleuropneumoniae. J Microbiol. 2012;50:978–86.

    Article  CAS  Google Scholar 

  26. Baltes N, Hennig-Pauka I, Gerlach GF. Both transferrin binding proteins are virulence factors in Actinobacillus pleuropneumoniae serotype 7 infection. FEMS Microbiol Lett. 2002;209:283–7.

    Article  CAS  Google Scholar 

  27. Goethe R, Gonzáles OF, Lindner T, Gerlach GF. A novel strategy for protective Actinobacillus pleuropneumoniae subunit vaccines: detergent extraction of cultures induced by iron restriction. Vaccine. 2000;19:966–75.

    Article  CAS  Google Scholar 

  28. Gonzalez GC, Yu RH, Rosteck Jr PR, Schryvers AB. Sequence, genetic analysis, and expression of Actinobacillus pleuropneumoniae transferrin receptor genes. Microbiology. 1995;141:2405–16.

    Article  CAS  Google Scholar 

  29. Chung JW, Küster-Schöck E, Gibbs BF, Jacques M, Coulton JW. Immunoproteomic analyses of outer membrane antigens of Actinobacillus pleuropneumoniae grown under iron-restricted conditions. Vet Microbiol. 2012;159:187–94.

    Article  CAS  Google Scholar 

  30. Rossi CC, de Araújo EF, de Queiroz MV, Bazzolli DM. Characterization of the omlA gene from different serotypes of Actinobacillus pleuropneumoniae: a new insight into an old approach. Genet Mol Biol. 2013;36:243–51.

    Article  CAS  Google Scholar 

  31. Yousef Mohamad K, Rekiki A, Myers G, Bavoil PM, Rodolakis A. Identification and characterisation of coding tandem repeat variants in incA gene of Chlamydophila pecorum. Vet Res. 2008;39:56.

    Article  Google Scholar 

  32. Mohamad KY, Kaltenboeck B, Rahman KS, Magnino S, Sachse K, Rodolakis A. Host adaptation of Chlamydia pecorum towards low virulence evident in co-evolution of the ompA, incA, and ORF663 Loci. PLoS One. 2014;9:e103615.

    Article  Google Scholar 

  33. Li L, Zhu J, Yang K, Xu Z, Liu Z, Zhou R. Changes in gene expression of Actinobacillus pleuropneumoniae in response to anaerobic stress reveal induction of central metabolism and biofilm formation. J Mcrobiol. 2014;52:473–81.

    Article  CAS  Google Scholar 

  34. Klitgaard K, Friis C, Jensen TK, Angen Ø, Boye M. Transcriptional portrait of Actinobacillus pleuropneumoniae during acute disease - potential strategies for survival and persistence in the host. PLoS One. 2012;7:e35549.

    Article  CAS  Google Scholar 

  35. Diao Y. Molecular epidemiological study on Actinobacillus pleuropneumoniae, Ph.D dissertation. Jinan, China: Library of Shandong Agricultural University; 2005. p. 17–8.

    Google Scholar 

  36. Buettner FF, Konze SA, Maas A, Gerlach GF. Proteomic and immunoproteomic characterization of a DIVA subunit vaccine against Actinobacillus pleuropneumoniae. Proteome Sci. 2011;9:23.

    Article  CAS  Google Scholar 

  37. Oldfield NJ, Donovan EA, Worrall KE, Wooldridge KG, Langford PR, Rycroft AN, et al. Identification and characterization of novel antigenic vaccine candidates of Actinobacillus pleuropneumoniae. Vaccine. 2008;26:1942–54.

    Article  CAS  Google Scholar 

  38. Ingolotti M, Kawalekar O, Shedlock DJ, Muthumani K, Weiner DB. DNA vaccines for targeting bacterial infections. Expert Rev Vaccines. 2010;9:747–63.

    Article  CAS  Google Scholar 

  39. Al-Hasani K, Boyce J, McCarl VP, Bottomley S, Wilkie I, Adler B. Identification of novel immunogens in Pasteurella multocida. Microb Cell Fact. 2007;6:3.

    Article  Google Scholar 

  40. E-komon T, Burchmore R, Herzyk P, Davies R. Predicting the outer membrane proteome of Pasteurella multocida based on consensus prediction enhanced by results integration and manual confirmation. BMC Bioinformatics. 2012;13:63.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

We would like to thank Dr. Weicheng Bei (at College of Veterinary Medicine, Huazhong Agricultural University, Wuhan, China) and Dr. Pat Blackall (at Queensland Alliance for Agriculture and Food Innovation, UQ, Australia) for the generous donation of A. pleuropneumoniae strains. We thank Dr. Jinrong Min (at Chromatin Structural Biology and Epigenetics, University of Toronto, Toronto, Canada) for the prediction of protein structure. This research was supported by grants from the National Nature Science Foundation of China (31101820) and the Fundamental Research Funds for the Central Universities (CCNU15A05037).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jinlin Liu.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

JLL conceived of the manuscript and designed all experiments, analyzed the data, and drafted the manuscript. XHH performed experiments, analyzed the data and drafted the manuscript. HY analyzed the data and drafted the manuscript. KL, JSH and YL analyzed the data. CQ, JHY and JZ provided instruments and experimental instructions. All authors read and approved the manuscript.

Xuehe Hu and Hao Yan contributed equally to this work.

Additional files

Additional file 1: Table S1.

Prediction of the potential lipoproteins (LPPs) of A. pleuropneumoniae (DOC 179 kb)

Additional file 2: Figure S1.

Prevalence of A. pleuropneumoniae Lip40 homologues in other Gram-negative bacteria. Multiple sequence alignment was constructed with BioEdit (version 7.0). The conserved amino acid residues are shaded in red. Lipoproteins (LPPs) in Aggregatibacter actinomycetemcomitans (YP_004948053.1) and Cardiobacterium hominis (ZP_05705901.1) were used in the alignment analysis. (TIFF 2102 kb)

Additional file 3: Figure S2.

Multiple sequence alignment. Homology between A. pleuropneumoniae Lip40 and Tbp proteins in Haemophilus sputorum (WP_007525245.1), Haemophilus pittmaniae (WP_007242241.1), and Neisseria sicca (WP_003766480.1) was analyzed with BioEdit (version 7.0). The conserved amino acid residues are shaded in red. (TIFF 5206 kb)

Additional file 4: Figure S3.

Evaluation of polyclonal anti-Lip40 antibody. (A) Dynamics of the antibody responses elicited by rLip40. Serum samples were taken from rabbits before each immunization and 10 days after the last immunization. Serum samples were diluted by PBST (1:2000, v/v) and evaluated by Lip40-ELISA. Results indicate the average OD630 values. (B) ELISA reactivity of anti-sera against rLip40 and GST. Anti-sera were collected 10 days after the last immunization, serially diluted and evaluated by Lip40-ELISA and GST-ELISA, separately. Results indicate the average OD630 values. (TIFF 2703 kb)

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hu, X., Yan, H., Liu, K. et al. Identification and characterization of a novel stress-responsive outer membrane protein Lip40 from Actinobacillus pleuropneumoniae . BMC Biotechnol 15, 106 (2015). https://doi.org/10.1186/s12896-015-0199-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s12896-015-0199-8

Keywords