Roll to Roll Fabrication of Thin Film Silicon Solar Cells on Nano-Textured Substrates
ECN is developing a novel fabrication process for thin film silicon solar cells on steel foil. Key features in this process are: (1) application of an insulating barrier layer which enables monolithic interconnection and texturization of the rear contact with submicron structures for
light trapping; (2) Si deposition with remote, linear PECVD; (3) series interconnection by laser scribing and printing after deposition of all layers, which reduces the total number of process steps. The barrier layer is essential for the monolithic series interconnection of cells, but we
show that it also enables optimum light trapping in the solar cells. We can fabricate any arbitrary sub-micron surface profile by hot embossing the barrier layer. For deposition of doped and intrinsic silicon layers we use novel remote, linear plasma sources, which are excellently suited for
continuous roll-to-roll processing. We have been able to fabricate device-quality amorphous and microcrystalline silicon layers with these sources. The first nip a-Si cells were made on steel substrates with flat barrier layer and had initial efficiencies of 6.3%, showing the potential of
the concept.
Keywords: LIGHT TRAPPING; NANOIMPRINTING; THIN FILM SILICON SOLAR CELLS
Document Type: Research Article
Publication date: 01 December 2011
- Journal for Nanoscience and Nanotechnology (JNN) is an international and multidisciplinary peer-reviewed journal with a wide-ranging coverage, consolidating research activities in all areas of nanoscience and nanotechnology into a single and unique reference source. JNN is the first cross-disciplinary journal to publish original full research articles, rapid communications of important new scientific and technological findings, timely state-of-the-art reviews with author's photo and short biography, and current research news encompassing the fundamental and applied research in all disciplines of science, engineering and medicine.
- Editorial Board
- Information for Authors
- Subscribe to this Title
- Terms & Conditions
- Ingenta Connect is not responsible for the content or availability of external websites
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content