Knowledge Service Technology for Supporting Intelligent Product Design

In this paper, a knowledge service method that supports the intelligent design of products is investigated. +e proposed method provides the solutions to computational problems and reasoning and decision-making problems in the field of intelligent design. +e requirement analysis of a knowledge-based intelligent design system integrates design knowledge into case-based reasoning activities through scheme analysis, scheme evaluation, and scheme adjustment, thus achieving knowledge-based intelligent reasoning and decision-making. During the similarity matching, a new hybrid similarity measurement method is proposed to calculate the similarity of crisp and fuzzy sets. +is method integrates the fuzzy set similarity theory based on the traditional similarity measurement method. A method of attribute level classification is proposed to assign weight coefficients. +e attributes are divided into the primary matching and auxiliary matching levels according to the decisiveness of case matching, and the set of weight coefficients is continuously and dynamically updated through case-based reasoning learning. +en, the weighted global similarity measure is used to obtain the set of similar cases from the case database. Finally, a design example of a computer numerical control tool holder product is studied to present the practicability and effectiveness of the proposed method.


Introduction
Currently, the increasingly competitive market environment has been forcing enterprises to strengthen their product development and their ability to respond quickly to market demands. e intelligent design methods can simultaneously meet the needs of rapid and automated product development, respond to the current needs of market diversification and customization, avoid many repetitions, shorten the research and development cycle, and enhance the competitiveness of products [1]. erefore, they have been highly valued by researchers and enterprises. Product design is a knowledge-driven innovative process that includes analysis, synthesis, and decision-making, while the intelligent design of products represents a result of the application of intelligent engineering and decision-making automation technology in the design field. e main goal of intelligent design is to solve two types of design problems: computational problems and reasoning and decision-making problems. e computer numerical control (CNC) tool holder is the core functional component of CNC machine tools with a wide variety of variable working conditions, diverse configuration requirements, and small market demand for a single product. However, its intelligent design is a knowledge-intensive and complex process. e structural design of the CNC tool holder products is a process of inheriting and reusing the design knowledge. Commonly, the typical design schemes that had been successfully developed and design knowledge and experience have been used in the design process. In the traditional design process of the CNC tool holder products, the design has to be performed for various performance indicators, and the design scheme of a CNC tool holder cannot be completed without many tests and verifications. e entire design process not only is timeconsuming, but also greatly relies on a designer's experience and expertise. Intelligent product design plays an important role in product design because it can achieve the inheritance, can reuse the product design process knowledge, and can reduce unnecessary repetitive design activities [2]. e basis for achieving an intelligent product design is a structured description and processing of design knowledge, which are necessary to realize the function of computer reasoning. To address the lack of semantic understanding of the existing injection mold intelligent design systems based on case-based reasoning (CBR), Guo et al. [3] introduced the ontology technology into the description of cases to achieve their semantic retrieval, which improved the system's recognition of the designer's design intent in the conceptual design phase. Zhang et al. [4] proposed a knowledge push technology based on applicable probabilistic matching and multidimensional context driving and constructed a training sample set, which includes knowledge description vectors, case feature vectors, and Boolean mapping matrixes, to describe the matching degree between knowledge and content. Khosravani and Nasiri [5] proposed case-based reasoning and applied it to the injection molding process. e injection molding CBR system was used for process design, process parameters design, fault diagnosis, and enhanced quality control. Wei et al. [6] proposed an intelligent design method for automobile interior structure based on rule-based reasoning. e method was designed as a three-layer architecture, including the interaction, reasoning, execution, and knowledge base layers. e intelligent design of the interior decoration structure of a car can be achieved through rule-based reasoning.
e existing research has improved knowledge-based intelligent design to a certain extent, but it still lacks a method that can provide a solution to the entire process of intelligent product design, which affects a comprehensive solution to the computational problems and reasoning and decision-making problems of intelligent design systems.
Many similarity calculation investigations and research on multiattribute decision-making can be found in the literature, as shown in Table 1.
In summary, to improve the retrieval efficiency in similar cases further, the above-mentioned studies have made improvements in similarity calculation, feature weight coefficient allocation, and case library optimization. For instance, the similarity calculation has been improved by methods such as hesitant fuzzy hybrid vector and weighted heterogeneous value distance measurement, genetic algorithm, particle swarm algorithm, and multistandard decisionmaking; the iterative weight update was used in the calculation of feature weight coefficients, thus avoiding excessive reliance on subjective judgments and making the retrieval more efficient. Although these methods have improved the retrieval efficiency and accuracy, there is still space for further improvement in the intelligent design of CNC tool holder products. e conceptual design of a CNC tool holder includes five attribute value formats, but there has been no unified calculation formula for the fuzzy attribute sets yet. In addition, a long time is needed for the existing retrieval schemes to find an optimal solution. Furthermore, the coefficients of the attribute weight set should be continuously and dynamically updated with the update of the case database.
To overcome the aforementioned challenges, a novel knowledge service method that supports the intelligent design of products is proposed in this paper. Based on the design knowledge of the previous product design standards and expert experience and combined with the case-based reasoning and rule-based reasoning mechanisms, the proposed method can effectively solve both computational problems and reasoning decision-making problems in intelligent product design. e contributions of this paper can be summarized as follows.
rough a detailed analysis of the existing research results of the comparison of the similarity measurement methods, the shortcomings of the existing methods for case retrieval of CNC tool holders are identified. Most of the existing methods for hybrid similarity measurement consider two, three, or four attribute values formats. Furthermore, based on the CNC tool holder product instances, the product attributes can be divided into five formats: Crisp Symbols (CS), Crisp Numbers (CN), Fuzzy Numbers (FN), Fuzzy Linguistic variables (FL), and Fuzzy Intervals (FI). e proposed method comprehensively considers multiple formats of attribute values involved in the process of case retrieval. ese formats basically cover all types of attribute values in practical CBR applications. A similarity calculation equation is developed for fuzzy attribute sets. A novel hybrid similarity calculation method is proposed to consider the similarity between the crisp and fuzzy sets comprehensively.
In the design of mechanical products, such as CNC tool holder products, the design resource library is a fundamental factor. In the conceptual design, the effects of various performance attributes of the CNC tool holder products on the case retrieval are considered. is is based on factors such as the design standards, experience rules, and professional domain knowledge in the design resource library. A method of the attribute level classification to assign weight coefficients is proposed, and attributes are divided into primary and auxiliary matching levels according to the decisiveness of instance matching. en, the tool holder model, tool holder configuration, and power source are taken as a primary matching level. As long as one of the three attributes does not match, the final similarity will be zero, which can reduce the time to find an optimal solution. Furthermore, in most of the existing studies, the weight coefficient will not change once it is determined. In this paper, the weight coefficient can be continuously and dynamically updated through case-based reasoning learning. Finally, through a design case of a CNC tool holder product, the method's ability to solve the reasoning and decisionmaking design problems is verified. e rest of this paper is structured as follows. In Section 2, the general idea of knowledge service supporting the intelligent design of products is proposed. In Section 3, a new hybrid similarity measurement method with five attribute value formats in scheme reasoning is proposed; also, a similarity calculation equation is derived for fuzzy attribute sets, and a method for attribute level classification is proposed to assign weight coefficients. In Section 4, an automatic calculation of computational problems in the intelligent design process is verified through a design case of a CNC tool holder product. e conclusions are presented in Section 5.

General Idea of Knowledge Service
Supporting the Intelligent Design of Products

Requirement Analysis of Intelligent Product Design.
An intelligent design is a modern design method that combines knowledge-based engineering (KBE) and computer-aided design theory. is method aims to enable the design system to use the abundant knowledge, such as expert experience, design manuals, standards, and industry norms, to reason, judge, make decisions, and achieve customization, automation, and intelligence of product design by simulating the cognitive and the behavioral characteristics of designers in the design activities [23][24][25]. e product design process is essentially an iterative decision-making process that includes user requirement assessment, design process decision-making, technical problem decision-making, and evaluative decision-making. e completion of these tasks requires using computeraided design tools, as well as a large amount of knowledge for reasoning, judgment, and decision-making [26]. e product design process requires the development of the intelligent design to a higher level of automation to support large-scale multidisciplinary and multidomain knowledge integration. e purpose of supporting intelligent product design is to replace the decision-making and reasoning processes of experts and designers with the KBE and artificial intelligence technologies. Moreover, its purpose is to intelligently achieve product design and knowledge reuse by constructing a design process-oriented knowledge environment, thus reducing the cycle iteration time and repetitive work in the product design process [27,28]. e knowledge service supporting the intelligent design of products is a human-computer interaction design activity that integrates multidomain knowledge and employs computer-aided design tools [29,30]. To clarify the functional goals of the knowledge-based intelligent design system, it is necessary to analyze the demand for intelligence in the actual product design process according to the characteristics of product design. e functional goals are as follows: (1) Support integrated management of distributed and heterogeneous knowledge. e product design knowledge has the characteristics of distribution, intensiveness, and heterogeneity. Most of the current product data management systems provide partial document data classification and storage and generally have only the keyword-based retrieval function. is is less effective for knowledge integration and service and is not conducive to the reuse of knowledge by designers. erefore, the intelligent design system first needs to realize the integrated management of distributed and heterogeneous knowledge.
(2) Support the design tool integration and process encapsulation. e competition of design tasks  [7] proposed two distance measures of intuitionistic and interval-valued fuzzy sets. Sharaf-El-Deen et al. [8] proposed a new hybrid case-based reasoning approach for medical diagnosis systems. Qian et al. [9] proposed an improved requirements-driven self-adaptation approach that combines goal reasoning and casebased reasoning. Gu et al. [10] proposed a CBR system based on the weighted heterogeneous value distance metric. Tan et al. [11] described the hesitant fuzzy Hamacher aggregation operators for multicriteria decision-making. Song et al. [12] proposed a general type of similarity measure for an intuitionistic fuzzy set with two parameters. Mahmood et al. [13] proposed the notion of complex hesitant fuzzy hybrid vector similarity measures. Feng and Khan et al. [14,15] proposed a case library optimization method to improve detection efficiency. e existing research on similarity calculation investigations has improved the accuracy of case retrieval and has made the retrieval process more reasonable. e proposed methods have the following advantages: (1) they enhance the ability of a CBR system to process nonlinear data; (2) they overcome the problem of difficulty in obtaining decision-making knowledge in cases of discontinuous information; (3) they can handle continuous and discrete attributes simultaneously.
However, some of the methods have certain limitations, which are as follows: (1) the classification of attribute types is not detailed enough; (2) the research on the similarity calculation of fuzzy attribute sets is not deep enough.
Feng et al. [16] combined the genetic algorithm and the particle swarm optimization algorithm in the calculation of attribute feature weights. Xiong et al. [17] have concluded that the normalization factor directly determines the influence of the corresponding attributes on the filtering result. Ahmadvand and Pishvaee [18] proposed a credibility-based fuzzy common weights data envelopment analysis approach. Li et al. [19] developed an integrated cumulative prospect theory based on the hybridinformation multicriteria decision-making approach. Lin et al. [20] reported that the traditional TODIM method could be extended to handle the HFLTSs based on the novel comparison function and distance measure. Chen et al. [21] proposed a two-stage logic scoring of the preference-ELECTRE III-based approach. Sun et al. [22] proposed an iterative weight update method based on the optimistic coefficient.
e existing research on multiattribute decision-making not only can improve the matching accuracy but can also avoid excessive reliance on decision-makers to set the weight value subjectively. e proposed methods have the following advantages: (1) they consider the psychological behavior of decision-makers; (2) the reasoning logic pattern in the human cognition process and the compensation among attributes are taken into account; (3) multiple methods are included to deal with multiattribute decision-making problems.
However, some of these methods have certain limitations: (1) it takes a long time to find an optimal solution; (2) the coefficients of the attribute weight set are not continuously and dynamically updated.
usually requires the collaborative use of multiple types of design tools. For instance, during the design of CNC tool holders, the Unigraphics (UG) software has been typically used for three-dimensional modeling, while MATLAB, ANSYS, and other software have been used for design activities such as calculation and simulation. is is a process of iterations and continuous corrections. It requires the intelligent design system to integrate different design tools and reuse the design process to support an iterative solution to the computational problems. (3) Support intelligent reasoning and decision-making. e intelligence of the intelligent product design is reflected in the ability of reasoning and decisionmaking similar to human thinking during the design process. It requires computers to achieve automatic processing and auxiliary/automatic decision support for multidomain and multitype design knowledge.

Knowledge Service Method for Intelligent Product Design.
According to the requirements of the intelligent design process, the content of knowledge service supporting the intelligent design of products can be divided into the following three parts: the integration and management of distributed and heterogeneous knowledge, the integration of design tools and encapsulation process, and the reasoning of design knowledge and auxiliary decision-making. e integration and management of distributed and heterogeneous knowledge mainly provide the service-oriented knowledge reuse for the intelligent reasoning of design knowledge and auxiliary decision-making to solve the reasoning decisionmaking problems. Based on these two parts, the integration of design tools and encapsulation process solves the computational problems based on the knowledge-based parametric drive and regularization constraints. ese three parts are independent and interrelated and jointly provide a solution to the computational problems and reasoning and decision-making problems in intelligent product design. e characteristics of intelligent design are analyzed, and a knowledge-based intelligent design system is constructed according to the relationship between the design process and design knowledge. e overview of the intelligent product design knowledge service system is shown in Figure 1.

Description of Product Design Problems of CNC Tool
Holders. A CNC tool holder is a key component of a CNC machine tool. After investigating the research and development of a CNC tool holder, the design contents of the CNC tool holder can be categorized as structural design, precision design of the indexing mechanism, strength design, and calibration of the transmission mechanism, as shown in Figure 2. A large amount of design knowledge, including design manuals, standard specifications, empirical rules, and successful cases, is required in the design process of CNC tool holders to accommodate different types of CNC machine tools and to achieve good running accuracy, indexing accuracy, and part strength. e conceptual design attributes of a CNC tool holder are extracted based on the index parameters of user performance requirements. Conceptual design cases of the CNC tool holder are expressed according to the attributes of the tool holder model, structural characteristics, accuracy characteristics, power indicators, and power sources, as shown in Table 2. e structural characteristics include the geometrical and structural characteristics of the CNC tool holder. e accuracy characteristics represent the accuracy evaluation index of the user requirements of the CNC tool holder. e performance characteristics mainly include the dynamic performance indicators of a servo tool holder. ese attributes can be divided into five data types: Crisp Symbols (CS), Crisp Numbers (CN), Fuzzy Numbers (FN), Fuzzy Linguistic variables (FL), and Fuzzy Intervals (FI). ese types include crisp and fuzzy sets [31]. e parameters of these attributes are used to retrieve similar design cases in the case library that are then used as design prototypes.
ese design prototypes are adjusted and modified to meet the user's requirements in the detailed design phase.

Scheme Reasoning and Auxiliary Decision-Making.
e CBR technology is a form of artificial intelligence used for the development of simple machine imitation to deep machine thinking. However, the existing CBR research has certain shortcomings in the scheme evaluation and parameter modification. erefore, in this study, the related knowledge involved in the design activities is integrated into the reasoning engine by constructing a knowledge environment that can play an auxiliary decision-making role [32,33]. As shown in Figure 3, the scheme reasoning and decision-making process can be divided into scheme analysis, scheme evaluation, and scheme adjustment. e main design activities include the reasoning of design cases and the auxiliary decision-making of design knowledge.
A set of design cases similar to the target solution can be obtained by the reasoning engine through case retrieval. e existing CBR-based intelligent design methods select the case with the highest degree of similarity as a target solution [34][35][36]. However, during the actual design process, similar matched cases will play only a partial role in a new design. In other words, the feature attributes of an object used for case matching cannot completely determine the reusability of a particular case, and the evaluation of a solution depends on various evaluation indexes, such as failure rate, structural simplicity, maintainability, safety, and economic cost. erefore, the system proposed in this paper adopts a scheme evaluation method that combines the gray correlation analysis and the entropy method to quantify the relationship between the evaluation index and scheme. Finally, a more scientific and reasonable similar optimal case is selected as a target scheme. After obtaining a similar optimal scheme, the system verifies the target scheme through the mapping relationship between the design requirements index and design parameters. For parameters that do not meet the design requirements, further modification is required to obtain the final design scheme, which is then saved to the database for purposes of sharing and reuse.

Case Similarity Matching Algorithm.
Case retrieval is a process of quickly matching similar cases in a case database according to the user requirements. e key technology is to establish an efficient case retrieval mechanism. e index attributes of the performance requirement of the CNC tool holder product are classified in Table 1. According to the new design problem requirements, a designer describes and classifies product attributes first and then matches similar      [37,38]. In the case of similarity measurement, the fuzzy set similarity theory can naturally simulate the actual situation [39]. erefore, a hybrid similarity measurement method that synthesizes both crisp and fuzzy sets of the CNC tool holder products is proposed in this study to ensure the efficiency of the CBR system retrieval mechanism.
Typically, the CBR system uses the Euclidean or Hamming distance as a similarity metric of the crisp set, which can be expressed as where x i and y i denote the ith attribute value of the two cases, while sim(x i , y i ) and dist(x i , y i ) are the similarity value and the distance between the ith attribute in the two cases, respectively. For the CN attribute value, where max i and min i are the upper and lower limits of the ith attribute value, respectively. For the CS attribute value, when x i � y i , then dist(x i , y i ) � 0 ; otherwise, dist(x i , y i ) � 1. e similarity measure of the crisp set is no longer applicable to the fuzzy set. erefore, in this study, the relative area method is used to calculate the similarity between two fuzzy sets as follows: where S represents the area of the corresponding membership function; x i and y i represent the ith attribute values of the two cases in the similarity metric; x i ∩ y i and x i ∪ y i represent the intersection and the union of the two fuzzy attribute domains, respectively. Four types of intersections of two fuzzy attribute domains are shown in Figure 4. In Figure 4(d), S(x i ∩ y i ) remains unchanged since the two attribute sets are inclusive. According to equation (2), the change in the center distance between the two fuzzy attribute domains does not affect their similarity. However, this does not conform to the similarity calculation of the fuzzy attribute type FL. Based on the above analysis, the fuzzy attribute domain similarity measurement methods developed for these four types are as follows: c xi � (α + α)/2, c yi � (β + β)/2 //calculate the midpoint c xi and c yi of the fuzzy set; α(β) and α(β) denote the upper and the lower limits of the fuzzy attribute domain, respectively. If c xi > c yi , then exchange x i and y i , endif.
Else//belongs to type (c) or (d). If

Global Similarity Measurement.
e attribute types of CNC tool holder products include crisp and fuzzy sets. us, a hybrid similarity metric should be employed to calculate the similarity between the attributes [40,41]. Another important aspect of improving the performance of similarity measurement is to assign reasonable attribute weight coefficients according to the relative importance of attributes [31,42]. e attributes can be classified into two levels according to the analysis of the product structure, accuracy, and performance indicators, as well as the importance and decisiveness of the product attribute for case matching. e first level is for primary matching and the second level is for auxiliary matching.
No weights are assigned for attributes belonging to the primary matching level, and the similarity measurement equation is expressed as follows: For the auxiliary matching level, the weighted average operator is used to aggregate the similarity measures between case attributes to obtain the level similarity. e weight coefficients are assigned by binary comparison evaluation and normalization of the weight set performed by multiple experts. Moreover, the weight set is stored in the system as a reference. e weight set is not static, and during the similarity measurement retrieval, the CBR system can continuously modify the weight set through learning to make it closer to the actual situation of the product design [43]. e similarity measurement equation for the auxiliary matching level is as follows: In equations (3) and (4), X and Y represent two instances; sim CS (x i , y i ), sim CN (x j , y j ), and sim FL (x l , y l ) are the similarity values of the attribute categories CS, CN, and FL, respectively; sim FNI (x k , y k ) is the similarity value between the FN and FI attributes; w i , w j , and w l are the weight coefficients of the attribute categories CS, CN, and FL in the matching level, respectively; w k is the weight coefficient of the FN and FI attributes, and w i + w j + w k + w l � 1 ; parameters i, j, and l are the numbers of attributes of the CS, CN, and FL categories of the two matching levels, respectively; k is the total number of attributes of FN and FI categories.
For the similarity measurement of attribute types FN and FI, it is necessary to consider the influence of the center distance of the two fuzzy attribute domains on the similarity measurement. e calculation equation is expressed as sim FNI x k , y k � ε k1 sim 1 FNI x k , y k + ε k2 sim 2 FNI x k , y k , (5) where sim FNI (x k , y k ) is the similarity measurement equation of attribute types FN and FI; ε k1 and ε k2 are the coefficients of sim 1 FNI (x k , y k ) and sim 2 FNI (x k , y k ), respectively, which are set by experts, stored in the retrieval system, and dynamically updated with the inclusion of new cases into the case a c xi c yi Shock and Vibration database; sim 1 FNI (x k , y k ) is obtained from the fuzzy set similarity by equation (2); sim 2 FNI (x k , y k ) represents the influence of the distance between the centers of two fuzzy sets on the similarity and it is calculated by Based on the hybrid similarity measurement method and the classification of matching weight coefficients, the global similarity of design case feature attribute matching in case retrieval can be expressed as follows:

Intelligent Design System
Structure. e architecture of the knowledge-based intelligent design can be divided into three layers: the interface layer, the function layer, and the resource layer, as shown in Figure 5. e interface layer has a friendly human-computer interaction interface that enables users to communicate with the system during operation and guides users to complete the design process of CNC tool holder products. e functional layer includes intelligent reasoning and decision-making of the scheme, design toolset, knowledge management, and reuse. is can help in effectively integrating the knowledge module with other modules and driving the product design by knowledge. e resource layer is mainly composed of the professional domain knowledge base, rule experience knowledge base, calculation model knowledge base, and case scheme knowledge base.

Application Examples.
Before scheme reasoning in the intelligent design system, the designers are first required to set the matching level and weighting coefficients for each performance index of the CNC tool holder product according to expert opinions. Weight matching levels and the assigned weighting coefficients of the corresponding performance index are shown in Table 3. e system automatically executes the case matching function according to the similarity calculation method corresponding to different performance index attribute types. en, the system obtains a set of similar cases.
Taking the product design of the CNC tool holder as an example, its product attribute types include crisp and fuzzy sets.
us, the global similarity measurement method is applied to the design of the CNC tool holder product based on case-based reasoning.
Suppose that X(X � (x 1 , x 2 , . . . , x 13 )) and Y(Y � (y 1 , y 2 , ..., y 13 )) are the new design case and the case in the case library of the CNC tool holder design, respectively, where x i and y i correspond to the attributes of X and Y, respectively, as shown in Table 2. In terms of weight coefficient assignment, no weight coefficient is assigned for the primary matching level. e weight coefficient of each attribute is given by the weight set in the system for the auxiliary matching level. e attribute data types, matching levels, weight coefficients, attribute values, and global similarity measurements of each attribute for new and old cases are given in Table 3.
According to Table 3, the global similarity value between the new design case and a case in the case library is 0.632. In equation (7), T represents the similarity threshold of the retrieved cases. All similar sets of cases whose similarity with the new design case is greater than the given threshold can be retrieved in the case library. e designers configure the weight of each evaluation index of the CNC tool holder design scheme determined by experts in the professional field, such as failure rate, structural simplicity, maintainability, safety, and economic cost. e system automatically calculates the gray correlation degree of each similar scheme according to the weight of each index. en, it sorts and obtains the design scheme with the largest gray correlation degree as an optimal similarity case. e intelligent design system automatically verifies the specific design scheme corresponding to the similar optimal case, checks whether each parameter in the scheme meets the requirements, and automatically modifies the scheme parameters based on the relevant knowledge from the rule experience knowledge base to obtain the final design scheme and saves it to the database.

Conclusions
is paper proposes a knowledge service method that supports the intelligent design of products from the aspect of demands for intelligent design in the actual product design process. e proposed method can effectively solve the calculation problems and reasoning and decision-making problems of the intelligent product design activities, providing support to the whole intelligent design process by using design knowledge. A global similarity measurement method is proposed for the scheme reasoning. Compared with the existing methods for hybrid similarity measurement, the proposed method has distinct characteristics, which are given in the following: (1) e proposed hybrid similarity measurement method includes five formats of attribute values: CS, CN, FN, FL, and FI. In this method, the attribute similarity for each format of the attribute value is calculated. (2) e proposed hybrid similarity measurement method integrates the fuzzy set similarity theory and traditional similarity measurement method. In addition, the derived similarity measurement equation for fuzzy attribute sets can solve the problems of complex and inaccurate fuzzy attribute retrieval in the traditional similarity measurement. (3) e attribute level classification method proposed to assign weight coefficients is based on the analysis of product structure and performance indicators. e attributes are classified into primary matching and auxiliary matching levels according to the importance and decisiveness of product attribute type to case matching, which can reduce the time to find an optimal solution. e set of weight coefficients can be continuously and dynamically updated through case-based reasoning learning so that it is more in line with the actual design situation of the product. (4) A global similarity measurement is performed by combining the hybrid similarity measurement and the level-based assignment of weight coefficients, which can improve solving the core problem of case retrieval in the CBR reasoning system. rough the design of CNC tool holder products, the effectiveness of the intelligent design system is verified. is paper presents an application of the hybrid similarity measure method in the field of mechanical product design, which is different from the previous work.
e future research work could include the following aspects: (1) e intelligent service of design knowledge could be further improved regarding the design process. Problems such as design knowledge-assisted decision-making through knowledge reasoning could be solved. In addition, a dynamic relationship between design knowledge and the design process could be achieved.
(2) e proposed intelligent calculation method could be embedded in the CBR system. e object's characteristic attributes used for case matching cannot completely determine the reusability of the case, so various evaluation indicators need to be comprehensively considered, such as failure rate, structural simplicity, maintainability, safety, and economic cost. In future work, a scheme evaluation method that combines the gray correlation analysis and the entropy method could be used to obtain a similar optimal case as a target scheme. (3) e proposed method could also be applied to case retrieval in a wider range of applications, such as medical diagnosis, emergency management, and engineering cost.

Data Availability
e data used to support the findings of this study are included within the article.

Conflicts of Interest
e authors declare that there are no conflicts of interest in this article.