HSE Risk Assessment of Major Sewage Transport Tunnel Projects at the Construction Stage Based on the Structural Entropy Weight Method and the Cloud Model

)e health, safety, and environment (HSE) risk assessment of major sewage transport tunnel projects (MSTTPs) is of great significance to guarantee sewage treatment, ecological environment protection, and sustainable development. To accurately evaluate the HSE risk of MSTTPs at the construction stage and effectively deal with their randomness and ambiguity, a risk assessment model based on the structural entropy weight method (SEWM) and the cloudmodel is put forward in this paper. First, an index system for MSTTPs was constructed via a literature review and expert interviews, and the rough sets method was used to filter the indicators.)en, weights were calculated by the SEWM, which is able to consider both subjective and objective factors of the weight calculation. Finally, to clarify the randomness and ambiguity in the evaluation, the HSE risk level was determined by the cloud similarity. )e model was applied to the Donghu Deep Tunnel Project in Wuhan, China, and the results demonstrated that its HSE risk level was medium, which was acceptable. )e index related to construction safety had the largest weight. A humid environment, improper power utilization, and sludge andmud pollution were found to be the most influential risk indicators.)e risk level could be intuitively and qualitatively judged by the figure evaluation cloud, providing a vivid and rapid evaluation tool for the emergency decision-making of project managers, and the risk level could be quantitatively judged by the calculation of cloud similarity. Moreover, through the comparison with gray correlation degree, set pair analysis, and fuzzy comprehensive evaluation method evaluation results, we prove the scientificity and effectiveness of the proposed model. )e research results provide a valuable reference for the project management of MSTTPs at the construction stage.


Introduction
In the past 30 years, urbanization in developing countries, especially China, has progressed rapidly, resulting in increased difficulties in urban sewage treatment and environmental pollution problems [1]. Moreover, the capacity for sustainable development has been severely restricted. To solve these problems, major cities in developing countries are initiatively building major sewage transport tunnels under the core areas of the cities [2]. At present, a large number of major sewage transport tunnel projects (MSTTPs) are being built in China, and the total investment has exceeded 15 billion RMB [3].
MSTTPs are usually located 30-60 m underground and their construction sites are typically closed construction environments, which have great impacts on occupational safety. e construction processes of MSTTPs are characterized by complicated technology, a strict construction period, high mechanization, and complex construction safety risk [4]. e accidents and pollution incidents caused by these risk factors may result in huge economic losses and casualties, making the MSTTPs unable to be completed on time.
Health, safety, and the environment (HSE) is a concept that was originally generated in the petrochemical industry [5]. In recent decades, HSE has been gradually applied to high-risk industries [5] and the management of major projects [6] with established results. In combination with the research purposes of this study, the HSE risk of MSTTPs is defined as the occupational health risk of workers, the construction safety risk, and the environmental pollution risk caused by the construction of MSTTPs. e occupational health risk of workers (the H risk factor) is geared toward the research category of public health science [7]. Safety risk management during construction, which is related to the S risk factor, belongs to the research areas of civil engineering and management science. e adverse effects of construction operations on the surrounding environment, which are related to the E risk factor, are part of the research fields of environmental engineering and civil engineering.
Referring to the general risk assessment process, the HSE risk assessment of MSTTPs in the present study includes three components, namely, the determination of risk indexes, weight calculations, and the selection of assessment methods.
At present, the existing research on HSE has primarily considered the HSE performance management of enterprises and the HSE risk management system of projects. Based on three elements, namely, time, scope, and type, Amir-Heidari et al. [8] comprehensively classified the HSE performance evaluation methods of enterprises and put forward a new HSE performance evaluation method from both positive and negative aspects. Lu and Li [9] studied the importance of the teamwork culture of construction teams in the HSE risk management system. Via a case analysis of a large prefabrication plant, it was proven that ensuring the HSE risk management system in an immersed tube prefabrication plant is of great significance to its smooth implementation. A team's strength could be mobilized and all construction workers could be motivated to participate in vocational education and safety production training. Zhang and Li [10] systematically studied the construction risk of the subsea tunnel of the Hong Kong-Zhuhai-Macao Bridge via HSE risk management. e LEC, an operation condition risk assessment, was used as the evaluation method for the analysis of the HSE risk level of the subsea tunnel, and the corresponding risk response measures were stated. However, the quantitative analysis and calculation process of the LEC method are subjective and do not provide a clear logical relationship between the values of risk indexes and the risk response measures. In addition, to the best of the authors' knowledge, a study on the HSE risk assessment of MSTTPs has not yet been reported. e main reason for the lack of prior research might be that the MSTTPs have only been restarted in the past few years, and many completed MSTTPs, such as the famous ames Tunnel in London, were completed over a century ago. e structural entropy weight method (SEWM) is a combined subjective and objective weight method that has been extensively used in recent years. Based on the characteristics of a large number of risk indicators for coalbed methane development and their complex relationships, Wang et al. [11] used the SEWM to process questionnaire survey results for weight calculation. e results were consistent with the actual situation of the case project. By employing the SEWM to calculate the weights of indexes, Liang et al. [12] not only effectively solved the problem of the lack of statistical data in the risk assessment of pipeline damage to the goaf, but also better handled the limitations of expert experience. Sun et al. [13] effectively adopted the SEWM to calculate the weights of the bearing capacity evaluation indexes of water resources.
For the selection of a risk assessment method, as one of the key steps in risk assessment, the characteristics of risk factors and assessment should be fully considered. Rezaee et al. [14] pointed out that the uncertainty of risk factors and the objectivity of assessment results are the key issues in the field of HSE risk assessment in the chemical industry. e failure mode and effects analysis (FMEA) and the fuzzy data envelopment analysis (DEA) were used to deal with these problems, but the randomness and fuzziness of the risk factors and risk assessment were neither further explored nor analyzed. e grey relational degree [15], set pair analysis [16], and fuzzy comprehensive evaluation [17] have been frequently used in risk assessment; while they have achieved sound results, it remains difficult for them to accurately describe randomness and fuzziness. e cloud model is able to analyze both qualitative descriptions and quantitative data and can handle both fuzziness and randomness of a risk system. In recent years, it has become increasingly more widely used in the field of risk assessment. Liu et al. [18] combined the cloud model with an artificial neural network and proposed a new method of urban flood risk assessment that could effectively deal with the randomness and fuzziness of urban flood risk factors. Peng [19] used the positive cloud generator and the reverse cloud generator to construct a risk assessment model of a cable-stayed bridge; the risk assessment results based on the cloud model were found to be more stable and reasonable. Liu et al. [20] employed the cloud model to improve the traditional FMEA method, and their case study results proved the effectiveness of this amendment. e present paper proposes a risk assessment model of MSTTPs based on the SEWM and the cloud model. e main contributions of this paper are as follows. (1) For the first time, a HSE risk evaluation index system was constructed from three aspects of health, safety, and environment by using the methods of literature research and questionnaire survey. Based on the genetic reduction algorithm of rough set theory, this paper retained the core evaluation index, effectively reduced the workload of the evaluation process, and enhanced the practicability of this method. (2) In this paper, the structural entropy weight method with the advantages of strong explanatory power and high accuracy of calculation results was used to calculate the weights of indexes. (3) Considering the fuzziness and randomness in the evaluation process, the qualitative concept of HSE risk evaluation index and the conversion of quantitative data were realized by the cloud model, which made the evaluation more reasonable. In addition, the risk level could be intuitively and qualitatively judged by the figure evaluation cloud, providing a vivid and rapid evaluation tool for the emergency decision-making of project managers, and the risk level could be quantitatively judged by the calculation of cloud similarity. (4) is paper revealed for the first time that, among the health, safety, and environment, the index related to safety had the largest weight, while the index affecting the environment had the smallest weight. is weight distribution was the same as the current research situation; the main research focused on the construction safety risks, while the research on analysis of construction's environmental impact risks was less. A humid environment, improper power utilization, and sludge and mud pollution were found to be the most influential risk indicators. e remainder of this paper is organized as follows. Section 2 focuses on the research materials and methods, including the index system and the risk assessment method based on the SEWM and the cloud model. e process of the case analysis is presented in Section 3, Section 4 details the discussion of the results, and the conclusions are presented in Section 5.

e Index System of HSE Risk Assessment of Major Sewage
Transport Tunnel Projects

Preliminary Selection of HSE Risk Index Indicators of
MSTTPs. According to the principles of scientificity, systematicness, effectiveness, and operability, risk indicators of the categories of health, safety, and the environment were preliminarily identified via research of the existing literature. Table 1 presents references for each risk indicator.

Determination of HSE Risk Index Indicators of
MSTTPs. At present, there only exist a handful of MSTTPs that have been constructed around the world. As many were built long ago, they are of little significance for investigation. In addition, China and other countries have just begun to construct MSTTPs. erefore, the available engineering data of MSTTPs is scarce. Considering this, the expert interview method was chosen to score the importance of the 42 HSE risk indicators that have been identified. According to the index score, the rough set was used to filter the index with the help of Rosetta.
In the questionnaire developed for this research, experts scored each indicator on a 5-point Likert scale. Each secondary indicator has five degrees of attributes for its primary indicator, which are "very strong" (5 points), "strong" (4 points), "average" (3 points), "weak" (2 points), and "very weak" (1 point).
e questionnaire was distributed to twenty-five experts with rich theoretical and practical experience. Eight experts were affiliated with universities, eleven were affiliated with construction enterprises of MSTTPs, and five were affiliated with MSTTP design units. Seventeen experts had the title of senior engineer or associate professor, while the other eight experts had the title of deputy senior engineer. Twenty experts had participated in the Donghu Deep Tunnel Project in Wuhan, which is the case study object of this article. Eleven experts had participated in more than three MSTTPs. ese characteristics of the experts ensure the rationality of the survey results.
After twenty-five experts had completed scoring for all 42 secondary indicators, the results of the questionnaire were collected.
Rough sets theory is a mathematical method proposed by the Polish scientist Z. Pawlak to deal with inaccurate, uncertain, and incomplete data [44]. In the process of rough set reduction, the relationship between evaluation indicators and decision indicators can be established according to methods such as self-information and mutual information, so as to determine the importance of conditional attributes and calculate weights [45]. e Rosetta system is a tabular logic data tool based on the rough set theoretical framework.  [42] Destruction of the ecological structure [43] It was developed by the Department of Computer and Information Science of the Norwegian University of Science and Technology and the Institute of Mathematics, University of Warsaw, Poland. is software is not aimed at a specific research field, but a general tool for simplifying models. In this paper, rough sets theory was used to screen indicators with the help of Rosetta system; the index screening results are shown in Table 2.

Construction of HSE Risk Index System of MSTTPs.
According to the identified indicators of the HSE risk of MSTTPs, an index system including 3 primary indicators and 13 secondary indicators was constructed, as shown in Table 2. In addition, based on the characteristics and actual situations of MSTTPs, the connotation of each secondary indicator was analyzed, as presented in Table 2.

HSE Risk Assessment Criteria of MSTTPs.
Currently, no uniform HSE risk evaluation standard does exist [46]. In this paper, the HSE risk was divided into five levels, namely, lower risk, low risk, medium risk, high risk, and higher risk. e scoring interval was set as [0, 100]. According to the opinions of experts, the risk levels were divided and are presented in Table 3. e concepts and calculations of Ex, En, and He are described in the subsequent section.
Lower risk indicates that the risk is negligible. Low risk indicates that the risk is low, but project managers must check the existing risk management measures. Medium risk indicates that the risk is moderate and acceptable, but further measures should be considered. High risk indicates that the risk is serious and mitigation measures should be taken immediately. Finally, higher risk indicates that the risk is the most serious and completely unacceptable and construction should be stopped immediately.

e Assessment Model of HSE Risk Assessment of Major
Sewage Transport Tunnel Projects 2.2.1. Introduction of the SEWM. e SEWM combines both qualitative analysis and the quantitative analysis of weight calculation [11]. Its basic logic is as follows. First, the Delphi expert survey method and fuzzy analysis method are combined to form a quantitative order that fully considers the subjective judgments of experts. en, entropy computing and cognitive blind degree analysis are used to analyze the quantitative order, and the statistical processing of potential data that may produce deviation is conducted with the modified uncertainty of the subjective judgments of experts. Finally, the weights of indexes are obtained via normalization.

Introduction of the Cloud Model.
e cloud model was first proposed by Li et al., a Chinese scholar. It realizes the two-way transformation of qualitative concepts and quantitative values [47]. By applying the cloud model to the evaluation of complex systems, the randomness and fuzziness of indicators and evaluation are fully considered [18].
A qualitative concept can be described by Ex (expected value), En (entropy), and He (hyper entropy), which are also recorded as (Ex, En, and He) [19].
(1) Ex represents the basic certainty of the qualitative concept. It is the mathematical expectation of the cloud drop in the spatial distribution of the domain. It also denotes the center value of the evaluation index in a certain grade score interval. (2) En represents the uncertainty measure of the qualitative concept and is determined by both randomness and ambiguity of the concept. It evaluates the degree of fuzziness of the index grade boundary. (3) He is the uncertainty of entropy and reflects the degree of deviation of the random variable corresponding to the qualitative concept from the normal distribution.

Risk Assessment Method of MSTTPs Based on the SEWM and the Cloud Model.
e flow chart of this evaluation method is illustrated in Figure 1.
e specific steps of the risk assessment method of MSTTPs based on the SEWM and the cloud model are as follows.
Step 1. Determine the standard cloud of each risk level.
ere are 5 subintervals shown in Table 1. Let the subinterval i be [C min i , C max i ], and the digital characteristic values are , where k is a constant that is usually assigned the value of 0.5 [47].
Step 2. Calculate the weights by the SEWM. e detailed steps for determining the weights are as follows [13].
(1) Determine the Quantitative Order Based on Expert Opinions. According to the operating procedures of the Delphi method, k experts with rich theoretical and practical experience are selected and sent a questionnaire. e questionnaire must be completed anonymously.
Experts score the importance of each index by using the integer of (1 − n), where 1 is the most important index and n is the least important index. e number of indicators is n. e index ranking matrix A is obtained as follows:

Advances in Civil Engineering
where a ij indicates the importance evaluation of expert i (2) Perform Weight Correction on the Quantitative Order.
According to the concept of the entropy weight method, the uncertainty of the quantitative order is corrected [11]: where I is the qualitative ranking number given by experts. If the ranking number given is 1, then I is 1. If the ranking number is 2, then I is 2. Additionally, m is the conversion parameter, which is generally considered as m � j + 2.
After including a ij in (3), the ordering quantitative conversion value b ij is obtained. Assuming that all experts have the same weights in the evaluation system, the average cognitive degree is defined as [12] b e uncertainty of experts' cognition is defined as knowledge blindness, and its parameter Q j is as given by the following equation [12]: e overall cognition degree of indicator j by k experts is defined as [13] x j � b j 1 − Q j . Humid environment H2 e humidity in the tunnel is exceedingly high, which may lead to skin dipping and erosion of construction workers. High ambient temperature H3 Excessive ambient temperature may cause heatstroke in workers. Toxic and harmful chemicals H4 Cement, paint, and other items may cause workers to suffer from occupational diseases such as contact dermatitis.

Safety
Excessive deformation S1 Excessive deformation leads to the destruction of the original structure, leading to safety accidents.
Improper power utilization S2 If the temporary power management is improper, it may easily give rise to an electric shock accident. Improper operation of shield segments S3 e improper operation of the construction personnel would end up in segments falling, causing object strike accidents. Imprecise installation of launching base S4 e launch base was installed incorrectly and the shield machine could not launch normally, resulting in a safety accident.

Environment
Domestic waste pollution E1 Domestic waste in office and living areas may cause damage to the surrounding environment.
Exhaust pollution E2 e construction of tunnels uses a lot of machinery, and waste gas will be generated during use. If it is not properly treated, it will pollute the atmosphere.
Sludges and muds pollution E3 Due to inexperience, it is difficult to achieve zero discharge of construction waste such as engineering sludges and muds.
Impact on groundwater E4 e earth pressure is not set properly, which may compact the surrounding soil and cause the groundwater level to rise significantly.
Excessive surface subsidence E5 During the construction of the shield, the surrounding soil is disturbed greatly, and the ground surface has a large settlement.

Advances in Civil Engineering
(3) Perform Normalization to Determine the Weights.
Step 3. Calculate the clouds of the evaluation factors and the comprehensive cloud. By substituting the scores of all experts [z ij ] k×m into the following equations , the clouds of the evaluation factors are obtained [19]: e weights W � (ω 1 , ω 2 , . . . , ω n ) T obtained in Step 2 are substituted into the clouds of the evaluation factors (Ex j , En j , He j ). e comprehensive cloud of the HSE risk of the MSTTP is determined by the following equation [19]: He j · ω j .
By drawing the comprehensive cloud and five standard clouds in the same image, the HSE risk level of an MSTTP can be qualitatively judged.
Step 4. Determine the HSE risk level by the cloud similarity. e steps for the calculation of δ i , which is the cloud similarity between the clouds of the evaluation factors and the comprehensive cloud, are as follows [47]: (1) Generate Ex p � Norm(En, He 2 ).
(2) Generate x p � Norm(Ex, Ex 2 p ). (3) Substitute into (12) to calculate μ p : (4) Repeat Steps 2 and 3 to generate μ p , where q ∈ [10,30]. en, δ i can be calculated as follows: e greater the value of δ i is, the closer the HSE risk level of the MSTTP is to the evaluation level. In this way, the HSE risk level of an MSTTP can be calculated quantitatively.

Engineering Background.
e case selected in this article is the Donghu Deep Tunnel Project in Wuhan, which is the largest MSTTP in China. Its recent service scope covers the core area of Wuhan, which is about 130.35 km 2 , and its long-term control service range is about 200.25 km 2 . Its total length is about 17.5 km via shield construction, the tunnel diameters are D3000-D3400 mm, and the buried depths are 30-50 m. When this project is successfully completed, the sewage from the core area of Wuhan will be directly transferred to the Beihu Sewage Treatment Plant, which is the largest sewage treatment plant in

Advances in Civil Engineering
China. e Donghu Deep Tunnel not only can elevate the capacity and efficiency of urban sewage transport, but can also effectively avoid the problem of the mixture of rain and sewage, thereby improving the water environment of Shahu Port, Luojia Port, and Donghu Port. To achieve the smooth implementation of this project, it is necessary to carry out a typical HSE risk assessment. Current data of MSTTPs was difficult to obtain, so the data used for the computations of the weights and risk levels in the case study were obtained by questionnaires. e 10 invited experts were the experts who selected the HSE risk indicator system in the preliminary study. e 10 experts scored the indexes on the basis of fully understanding the site situation, construction content, and process of the Donghu Deep Tunnel Project. According to (1), three digital clouds of the characteristics of each level were computed and are presented in Table 1.

Determination of Indicator Weights.
After a questionnaire survey, the results of the importance scores of the 3 primary indicators and 15 secondary indicators by the twenty-five experts were substituted into (2)-(7), and the calculation results of the weights of the 3 primary indexes (Table 4), 4 secondary indexes related to the health indicator (Table 5), 4 secondary indexes related to the safety indicator (Table 6), and 5 secondary indexes related to the environment indicator (Table 7) were obtained.
From Table 4, it can be seen that the safety indicator has the largest weight of the primary indexes, while the environment indicator has the smallest weight. is weighting explains the phenomenon of most previous research focusing on construction safety risks instead of environmental risks. Table 5 shows that the humid environment index (H2) has the largest weight, while the high ambient temperature (H3) has the least weight. ese results are consistent with the construction content of MSTTPs, in which earth pressure balance shield machines are used for shield construction and typically create a high-humidity environment. However, MSTTPs are mostly constructed underground and with good ventilation. So, high temperature conditions will not occur.
As presented in Table 6, the weight of the improper power utilization index (S2) is the largest of the 6 secondary indexes related to safety, and the weight of the imprecise installation of launching base (S4) is the smallest. e construction safety risk management of MSTTPs should therefore focus on improper power utilization.
As presented in Table 7, the sludge and mud polarization index (E3) has the largest weight. e reason for this is that the main pollutants produced during the shield construction of the Donghu Deep Tunnel Project in Wuhan are sludge and mud.

Calculations of the Clouds of Evaluation Factors and the
Comprehensive Cloud. Via the questionnaire survey results of 25 experts, the scores of the 13 secondary indexes of the Donghu Deep Tunnel Project were averaged and introduced into (8)- (10). e evaluation cloud model of each index was obtained, as presented in Table 8.
After substituting the weight calculation results and the clouds of the evaluation factors into (11), the comprehensive cloud was found to be 67.8774, 7.3989, and 1.4578, and this is shown in Figure 2.
It can be easily and intuitively seen that the HSE risk level of the Donghu Deep Tunnel Project was found   to be the closest to moderate risk [18,38].
e cloud model could therefore effectively deal with the randomness and ambiguity in the HSE risk evaluation of MSTTPs.

Determination of the HSE Risk Level by the Cloud
Similarity. After introducing the obtained comprehensive evaluation cloud (67.8774, 7.3989, and 1.4578) into (12) and (13), the cloud similarities δ i between the comprehensive evaluation cloud and the five standard clouds were obtained and are presented in Table 9. In (12), q is an important parameter (q ∈ [10,30]). δ i under three different values of q was calculated in Table 9.
e cloud similarity between the comprehensive evaluation cloud and the standard Cloud 3 was the largest, which indicates that the HSE risk level of the Donghu Deep Tunnel Project is medium risk.

Discussion
e weight calculation in risk assessment often only considers subjective or objective factors, thereby making the weights inaccurate. Moreover, the common risk evaluation methods cannot reasonably take into account the randomness and ambiguity in the evaluation process, thereby making the risk evaluation results inaccurate. Currently, MSTTPs are under construction in large quantities, but there is little research on the risk of MSTTPs, and research on the HSE risk assessment of MSTTPs has not yet been reported.
To fill this gap, a typical risk evaluation index system of MSTTPs was constructed in this study for the first time.
en, to ensure the accuracy of the weight calculations, the SEWM, in which both subjective and objective factors in the weight calculation are comprehensively considered, was used to calculate the weights. Finally, an evaluation method based on the cloud model was adopted to describe the randomness and ambiguity of the HSE risk assessment of MSTTPs. e research results obtained in this study can help ensure the smooth implementation of MSTTPs and are of great significance for ensuring wastewater treatment, ecological environment protection, and sustainable development.
Because there are no existing research results on the HSE risk of MSTTPs, this paper compared the results of case analysis with the results of common risk assessment methods (the grey relational degree [15], set pair analysis [16], and fuzzy comprehensive evaluation [17]). e grey relational degree calculation results of each risk level are shown in Table 10. According to the calculation result of the index weight of Donghu Deep Tunnel Project and the average of the scores of each risk index, the gray correlation degree of Donghu Deep Tunnel Project was 0.428, which belonged to medium risk. e calculation result of the five-element connection number of Donghu Deep Tunnel Projects calculated by set pair analysis is shown in Table 11. When the confidence ∈ [0.50, 0.70], the HSE risk of Donghu Deep Tunnel Project was medium risk.
e evaluation results of fuzzy comprehensive evaluation are shown in Table 12. According to the principle of maximum membership degree of comprehensive evaluation, the HSE risk was medium risk. e grey relational degree, set pair analysis, and fuzzy comprehensive evaluation results of HSE risk of Donghu Deep Tunnel Project belonged to the medium risk, and the direct evaluation results were basically consistent   [15,47]. When many pieces of data and information were used, the evaluation of indicators always carried a certain degree of uncertainty and randomness. In the application process of the set pair analysis method, it was difficult to determine the ambiguity of the index difference coefficient, so it was not able to be widely promoted in actual evaluation [16]. In practical applications, the fuzzy synthesis method often used the membership function to calculate the membership degree of each index and forcibly incorporated the fuzziness of the index into the category of precise mathematics. ese characteristics made it difficult to deal with the randomness and uncertainty of indicators. e method in this article used the cloud model to consider the ambiguity and randomness in the HSE     Advances in Civil Engineering evaluation work, and the cloud diagram of the model in the article vividly and intuitively depicted these characteristics of the evaluation [47]. e calculation results are displayed in two ways: similarity and cloud graph, which is convenient for decision makers to use evaluation information.

Conclusions
To accurately evaluate the HSE risk of MSTTPs and effectively deal with their randomness and ambiguity, the SEWM and the cloud model were employed. In this paper, for the first time, an index system for MSTTPs at the construction stage was constructed from three aspects of health, safety, and environment via a literature review and expert interviews. Based on the genetic reduction algorithm of rough set theory, this paper retained the core evaluation index, effectively reduced the workload of the evaluation process, and enhanced the practicability of this method. en, weights were calculated by the SEWM with the advantages of strong explanatory power and high accuracy of calculation results. To clarify the randomness and ambiguity in the evaluation, the HSE risk level was determined by the cloud similarity. is model was applied to the Donghu Deep Tunnel Project in Wuhan, China, and the results demonstrated that its HSE risk level was medium, which was acceptable. e index related to construction safety had the largest weight. A humid environment, improper power utilization, and sludge and mud pollution were found to be the most influential risk indicators, which should be key points in HSE risk management of MSTTPs. e risk level could be intuitively and qualitatively judged by the figure evaluation cloud, providing a vivid and rapid evaluation tool for the emergency decision-making of project managers, and the risk level could be quantitatively judged by the calculation of cloud similarity. rough the comparison with gray correlation degree, set pair analysis, and fuzzy comprehensive evaluation method evaluation results, we prove the scientificity and effectiveness of the proposed model. e construction process of MSTTPs has obvious stages and is highly dynamic, so the HSE risk factors and risk levels also have obvious stages and are highly dynamic. e accurate description of these stages and dynamics will further improve the application and promotion value of the research results achieved in this paper. Due to the difficulty in obtaining engineering data, qualitative indicators were used in this research. erefore, determining how to select and use quantitative indicators to describe the HSE risk of MSTTPs will be explored in future research.
Data Availability e case analysis data used to support the findings of this study are available from the corresponding author upon request.

Conflicts of Interest
e authors declare that there are no conflicts of interest regarding the publication of this paper.