Bacteriological Monitoring of Inanimate Surfaces and Equipment in Some Referral Hospitals in Assiut City, Egypt

Hospital-acquired infections represent a serious public health problem in all countries. It is clear that monitoring of the hospital environment is an essential element in the control and a part of the policy for preventing nosocomial infections. It allows a better understanding of the microbial ecology for the purpose of conducting preventive and corrective actions. The aims of this work were to determine the percentage of bacterial contamination of environmental samples and to identify potential nosocomial pathogens isolated from environments of seven referral hospitals from 2009 to 2015. By using the swab technique, 12863 samples were collected. Qualitative and quantitative cultures were performed. The organisms were primarily identified by colony morphology, microscopy of Gram stain, and standard biochemical tests. 25.6% of total samples showed contamination (93% was monomicrobial and 7.0% was polymicrobial). The predominant species was coagulase-negative staphylococcus (CNS) (32%), followed by methicillin-resistant S. aureus (MRSA) (26%) and then K. pneumonia (10.6%). The percentage of contamination varied among the covered hospitals and according to the year of monitoring with highly statistically significant difference (p value < 0.001). Direct contact with environmental surfaces or equipment transmits the majority of nosocomial infection. Major nosocomial pathogens have been identified. Hospital managers and healthcare bodies must be aware of the reality of the concept of environmental bacterial tanks and the need for respect of biocleaning procedures and choice of biocleaning tools.


Introduction
Hospital or hospital-acquired infections represent a serious public health problem in all countries [1]. e burden of HAI is already substantial in developed countries, where it affects from 5% to 15% of hospitalized patients in regular wards and as many as 50% or more of patients in intensive care units (ICUs) [2,3].
It is clear that monitoring of the hospital environment is an essential element in the control of nosocomial infections. As possible causes of infection, contamination of surfaces may be mentioned, even if cross contamination by hands is probably the greatest risk. In fact, hospital surfaces colonized by different types of microorganisms constitute special ecological niches that require cumbersome, complex, and costly procedures that are necessary for better safety of the patient [4].
ere is a high prevalence of contamination of equipment and high-touch surfaces surrounding the patient [5]. e ability of microorganisms to survive on surfaces is due to their production of adhesion molecules and biofilms [6]. Direct contact primarily with environmental surfaces or equipment transmits the majority of nosocomial infection [7]. Major nosocomial pathogens have been identified. ey can circulate between the patients and might persist in the environment for a long time [8].
As established by microbiological studies, certain hospital pathogens can survive on dry hospital surfaces for extended periods [9]. Both Gram-negative and Gram-positive bacteria can survive up to months on dry inanimate surfaces with longer persistence under lower temperature and humid condition [10].
Surfaces of commonly used medical equipment and high-contract communal surfaces (e.g., medical chart and telephones) could be contaminated by multidrug-resistant bacteria (MDR) [11]. In the issue of intensive care unit (ICU) where critically ill patients have several risk factors for nosocomial infection, the issue of environmental contamination poses an even greater challenge [12].
Monitoring of the hospital environment is lacking in hospitals in Assiut city, so the main objectives of this study were to determine the percentage of bacterial contamination of environmental samples and to identify potential nosocomial pathogens isolated from environments of seven referral hospitals in Assiut city as identification of bacterial contamination of environmental samples is a guide for appropriate preventive measures of infection.

Materials and Methods
is descriptive cross-sectional study was conducted in seven referral hospitals in Assiut city, Egypt, from 2009 to 2015. All hospitals belong to Assiut University Hospitals, except health insurance hospitals, as they are present in Assiut city, they are the most important hospitals in Assiut and for the whole upper Egypt, easy access, large drainage area for Assiut Governorate as well as for nearby Governorates and preferred to other hospitals due to highly qualified medical staff, good equipment, and facilities allowing good percentage of referral from near as well as distant areas. e selection of sampling sites was made in consultation with the heads of departments and targeted to the most representative and most critical location in each hospital. Random, undirected sampling was collected. Sterile swabs were moistened in sterile normal saline and rolled over the targeted inanimate surfaces/equipment separately (e.g., beds, ventilators, monitors, bedside tables, operation tables, anaesthesia equipment, trolley, dressings, bench, and surgical blades) [13]. Samples were transported to the Infection Control Laboratory of Assiut University Hospital. e swabs were cultured on blood agar plates at 35°C for 48 hours and subcultured on MacConkey' agar for the selection of Gram-negative bacteria [8].
Colonies were primarily identified by colony morphology, microscopy of Gram stain, and standard biochemical tests. [14] Only pathogenic microbes are examined.

Statistical Analysis.
Data entry and analysis were performed using Statistical Package for Social Science version 14 (SPSS). p value was considered statistically significant when p < 0.05.  (Table 1 and Figure 1).

Results
More than half of the samples (57.5%) were collected from Main Assiut University Hospital and the least percentage (0.2%) from Urology University Hospital (Table 2). Contamination was positive in 25.6% of samples ( Figure 2). According to the pattern of contamination, 7% of samples were polymicrobial ( Figure 3). About 32% and 26% of isolated organisms were CNS and MRSA, respectively, followed by K. pneumoniae (20.7%) then Gram-positive bacillus sp. (C. difficile) (10.6%) ( Table 3). In the year 2011, 31.0% of the samples were contaminated followed by the years 2015 and 2014 (26.9% and 26.7%), respectively, and the least contamination was in the year 2012 (9.0%) with statistically significant difference (p < 0.001) ( Table 4).
At Main Assiut University Hospital, 30.5% of the samples were contaminated followed by Al-Ragehy    (Figure 4). In Health Insurance Hospital, Pediatric University Hospital, Women Healthcare University Hospital, and Main Assiut University Hospital, the most common organism isolated was CNS (41.1%, 32.7%, 32.6%, 31.5%, and 24.5%), respectively (Table 6). e majority of organisms from all hospitals were monomicrobial (Table 7).

Discussion
In this study, we investigated a total of 12863 samples with 25.6% positivity of bacterial contamination. is was more or less similar to a study by Rozonska et al., as overall, 69.6% of samples exhibited growth of 19 bacterial species. Pathogenic species-representing indicator organisms of efficiency of hospital cleaning-was demonstrated by 21.4% of samples; among them, Acinetobacter spp., Enterococcus spp., and Staphylococcus aureus were identified. Coagulase-negative staphylococci (CNS) were predominant [15]. In another study, 51% of the environmental samples were contaminated with different bacterial species in the studied ICUs [16]. is was more or less twice the results of our study. Discrepancies between studies concerning the impact and degree of environmental contamination may reflect a complex epidemiology, differences in the measurement between studies, or the variable quality of institutional cleaning, which is an important and frequently unmeasured confounder [17]. Regarding the frequency of environmental contamination among hospitals under study, we noticed a wide range of variation that could be explained by the concept of Otter et al., who reported many factors such as method of sampling, organism culturability, and ease of particular environmental contamination (difficulty or cleaning) [9].
Multibacterial contamination of the environmental samples was estimated to be 11% [15]. is agrees with this study (7% polymicrobial). 10.6% of isolated organisms were Clostridium difficile. Spores of Clostridium difficile are durable and resistant to usual cleaning methods. Contamination of the inanimate environment by C. difficile has been reported to occur in areas in close proximity to infected or colonized patients [17].
Gram-negative bacilli: enteric Gram-negative bacilli are not commonly spread to patients from the dry inanimate environment; they are generally not viable after drying, lasting 7 h or less after desiccation [18].
Infection with these organisms is thought to occur because of endogenous spread or cross infection between patients via the hands of healthcare workers. However, Pseudomonas aeruginosa and Acinetobacter baumannii are strongly associated with environmental contamination.
Many studies have documented the contamination of sinks and sink drains by P. aeruginosa [17]. Rates of environmental contamination also vary on the basis of the site of infection in source patients: contamination is more common in the rooms of patients with urinary infection or wounds than in the rooms of patients with bacteremia only [19]. is study found that the proportion of various groups of bacteria significantly varied in respective hospitals.
Poor hygiene compliance facilitates more cross transmission and environmental contamination [20]. Absence of proper infection guidelines contributes to contamination of electrical equipment [21].
Hu et al. found difficulty in the eradication of environmental organisms and explained the survival of those organisms in dry surface biofilms [22].
In our study, CNS was found as the most common environmental isolate (31.9%) followed by MRSA, which was more or less agreed with Mohapatra et al., who reported that CoNs and MRSA are among the common environmental pathogens [23].  International Journal of Microbiology    [24]. ese results are similar to those reported by Tagnouokam with a predominance of CNS (55%) [25]. is finding is also supported by another study as Lamali et al. found CNS (24%) positivity among environmental samples among a total of 81 investigated samples [4].
Also, these results were in agreement with Sauuide et al., where they found 26% positivity of CNS followed by MRSA 20% then K. pneumonia 16% [26]. In a study by Cordeiro et al., different species belonging to CNS were found in equipment before and after disinfection [27].
In the current study, A. baumannii was isolated from the hospital environments. is finding is supported by a similar study reported that Acinetobacter spp. remains in the hospital environment for a long time, transmitting the infection through staff hands and contaminated surfaces. [28].
We concluded that contamination of high-touch surfaces and equipment of hospital environments by pathogenic bacteria will raise the need for improving its biological safety and hand hygiene compliance of healthcare workers. ese bacteria increase the risk of transmission to patient and subsequently hospital-acquired infection. We recommend periodic cultures to reduce the rate of contamination. Local epidemiology strategy is appropriate to address surface contamination.

Data Availability
e data used to support the findings of this study are available from the corresponding author upon request.

Disclosure
Poster of the manuscript was presented in Second International Congress and Expo on Bacteriology.

Conflicts of Interest
e authors declare that there are no conflicts of interest.