Wide-Band High-Gain DGS Antenna System for Indoor Robot Positioning

Based on multisource wireless signal fusion technology, the autonomous positioning systems of robots have been widely employed. How to design a compact compostable antenna array for indoor robot positioning is still a problem. In this study, we proposed a compact ultrathin antenna unit that effectively reduces the mutual coupling between any adjacent units, while covering most of the existing communication bands, including 2G/3G/4G/Wi-Fi, which will greatly reduce the size of the positioning antenna array. The proposed antenna system has been employed for positioning purpose with high-gain, wide-frequency band and limited size. It necessarily improves the accuracy of positioning signal from various unknown sources and finally accomplishes its autonomous positioning function.


Introduction
In the last few years, with the rapid development of the economy, science, and technology, intelligent robots have emerged in every aspect of work and life.Multiple disciplines related to the robot systems, e.g., sensors, data conversion, signal processing and control, artificial intelligence, and bionics, have made remarkable achievements.However, robot positioning, especially in complex environments, remains an unsolved problem [1].In any indeterminate environment, a robot would scan the surroundings and creates an environmental floor plan for navigation.After an instruction is received, the robot retrieves correlation data of the target to seek the best route and achieve an autonomous cruising task.However, the most important prerequisite of robot precision autonomous positioning is to establish a high-precision route database and ensure cruise accuracy [2].Presently, normal positioning systems include laser ranging sensors, RFID identification sensors, inertial navigation systems (e.g., gyroscopes and accelerometers), the raster map technology, etc. [3][4][5][6].
In this study, we propose a comprehensive positioning RF device by using various existing communication signals.
By transmitting and receiving any 2G/3G/4G/Wi-Fi signal, the novel wireless RF device would obtain real-time high-accuracy positioning data through a positioning algorithm.When a robot is employed in an unknown environment, it will scan all nearby wireless signal sources and obtain connections with them.With the robot cruising the work area and drawing a blueprint, the positioning system also collects the various wireless signals and makes precise area location within its coverage region.In this way, the robot needs a compact antenna system which can cover more communication standards and receive weak signals from different directions.This means that the positioning antenna system needs small size, high-gain multiband.
However, in present, as multi/ultrawide-band high-gain positioning antennas are usually bulky, it is difficult to be installing on small robots.Therefore, a miniaturized robot positioning antenna unit is urgently needed [7][8][9].In order to accurately detect the positioning signal source within its coverage region, the proposed positioning antenna system also requires wide-frequency band and good directionality.In this study, we propose an ultrasmall antenna unit and its array that provide small size, broad-frequency band, diverse layout, and Omni-directional coverage to high-precision positioning systems of small mobile robots.

Design Ideas and Methods
For an indoor robot, to collect high-precision wireless signal and obtain accurate positioning data, one small-sized high-precision wireless positioning antenna system is proposed in this paper.The most important for a robot positioning antenna is to reduce the size of antenna; some references [10][11][12] have proposed various methods to reduce the size of the antenna radiating unit below one-fourth the wavelength, such as a low-profile dual-polarized antenna, an EBG structure antenna as radiating element, or a high-impedance periodic metal structure.
Here, one periodic defected ground structure (DGS) as the antenna reflector plate is proposed to improve antenna gain and reduce the size of position antenna.DGS, an etched periodic or nonperiodic cascaded configuration defect in ground of a planar transmission line (which disturbs the shield current distribution in the ground plane cause of the defect in the ground), is intentionally modified to enhance performance [13][14][15][16][17].According to the literature [18], in order to obtain a compact broadband antenna, one optimized DGS has been integrated with the antenna radiating unit.Based on this principle, some specific aerial elements and reflecting DGS have been employed; the antenna unit is printed on either side is a dielectric substrate with relative permittivity of 4.4 and 1 mm thickness.The robot RF position modularity requires higher gain, smaller size, and broader relative bandwidth; the DGS need to be optimized to have better effectiveness of reflection within operation frequency 1.7-2.7 GHz.As shown in Figure 1(a), the proposed DGS structure is printed on the bottom of dielectric substrate.It has a complete symmetry around the geometric center and has a reflection phase from −90 to 90 degrees within operation frequency to cover broadband detection requirements.In this design, the DGS structure is composed of a central reflection region and an edge reflection region.The gap of the edge reflection region is located at the bottom of the antenna radiating elements to enhance antenna radiating performance.One coaxial feed line runs through the entire structure from antenna to DGS.The external of coaxial feed line is connected to DGS.The coaxial line will feed antenna radiating element.Figure 1(b) is the antenna radiating element.
While having wider operation band and higher antenna gain, for the robot positioning system requirements, the design of miniaturization antenna is pursued in two aspects: antenna radiating element and reflection element.Here, the radiating elements involve the radiating element arm, feeding sheet, and transmission line.Based on this, four radiating elements are printed on a dielectric substrate, with an angle of 90 degrees to each adjacent element.To expand antenna impedance bandwidth and improve the antenna gain, the sizes of the four radiating elements of the antenna are different and optimized to meet four individual quarter wavelengths continuously from 1.7 to 2.7 GHz.The geometric parameters of the antenna structure are shown in Table 1.

Modeling and Simulation
As mentioned above, we studied a compact broadband robot positioning antenna unit, consisting of a radiation sheet, DGS structure, and feed cable.The proposed structure has been modeled and simulated by using commercial simulation software (CST), and the simulation results are shown in The S-parameters are simulated within 1-3 GHz.The simulated result indicates that the return loss ( S11 ) of the antenna unit is less than −10 dB within the operating frequency.Also, the radiation gain of the antenna unit is greater than 2 dB.In order to verify the practicality and reduce the size of the proposed DGS antenna, we employ a couple of units to build one antenna array.Taking the extreme case as an example, the interval between two antenna units is 0 cm and cophase feeding with constant amplitude is conducted on a dual-element antenna, as shown in Figure 3.To test the performance of the antenna unit in various circumstances, the phase angle of the dual-element antenna unit is, respectively, set to 0 °, 90 °, 180 °, or 270 The simulated results of the S-parameters are shown in Figure 4. S11 and S22 are the return losses of two ports, and S21 is the isolation between the two ports.As shown in Figure 4, all simulated S11 and S22 are below −10 dB within working frequency 1.2-2.7 GHz, while the simulated S21 is below −20 dB, indicating that the designed antenna units have good impedance bandwidth characteristics and a good isolation between the two units because of the adopted DGS reflection technology.Even the interval between two antenna elements is 0 cm, this greatly improves the adaptability of the antenna unit and enables them to be intensively arranged without affecting antenna performance, which greatly reduces the geometric size of the antenna array suitable for a robot positioning system.Through different arrangements and increasing or decreasing the number of antennas, the antenna system can achieve the desired performance of the antenna positioning system.
At the frequency of 2 GHz, the simulated far-field radiation pattern of the positioning antenna array at the H-plane is shown in Figure 5.Because the four radiating elements of one antenna unit are not identical, to further validate the performance of the antenna unit in an array, the phase difference of the dual-element antenna unit is set as 0 °, 90 °, 180 °, or 270 The simulation results present the maximum gain of the antenna greater than 4.67 dB, and the width of the main lobe beam is 56-68 °.The result shows that the antenna radiation 3 International Journal of Antennas and Propagation pattern is consistent, which indicates that the radiation performance of the designed positioning antenna is stable.The above simulation test results show that the proposed antenna design has a small size, wide-frequency band, high isolation, and stable radiation performance, which are suitable for small-sized robot positioning antenna system.
To further verify the proposed antenna, based on the above simulation results, we employed four elements to build an antenna array.As shown in Figure 6, four antenna units are placed in a plane with an antenna element spacing of 0 mm and 0 degree phase angle between adjacent elements.The simulated S-parameter results are presented in Figure 7. Within the operation frequency 1.7-2.7 GHz, the return loss of antenna elements ( S11 , S22 , S33 , and S44 ) is all below −10 dB and the mutual coupling (|S14|, |S23|) between any two antenna elements is lower than −20 dB, which means good isolation between any two antenna elements.Also, the far-field pattern of the four-element antenna is shown in Figure 8.The radiation pattern of the antenna system at 2 GHz is greater than 8 dB and points to different directions, which meets the requirement of a robot positioning system antenna for high-precision positioning purpose.

Measurement
A prototype of the configuration employing the DGS has been fabricated in order to experimentally validate the proposed design, as shown in Figure 9.The measured S -parameters are also presented in Figure 10 for comparison.These results validate that, in the presence of the DGS, the antenna operates within the desired frequency (S11 < −10 dB).The resonances of measurement result are very slightly shifted.These minor discrepancies are due to fabrication imperfections in the manual soldering of the feeding and shorting pins of the antenna.The antenna radiation pattern has been assessed experimentally.It is matching the simulation results; the radiation gain of antenna unit is greater than 2 dB, as presented in Figure 11.The measured results match the simulation presented above.Based on the configuration and dimensions of the single antenna element, a dual-element antenna array is also studied.A configuration and an experimental prototype of the proposed antenna system are shown in Figure 12.The interval between two antenna units is 0 cm; cophase feeding with constant amplitude is conducted on a dual-element antenna.The phase angle of the dual-element antenna unit is, respectively, set to 0 °, 90 °, 180 °, or 270 °.After fabrication, the measurement results have been presented in Figure 13.All measured antenna return loss ( S11 , S22 ) is below −10 dB, while the measured mutual coupling S21 is below −20 dB, indicating that the designed antenna units have   8 International Journal of Antennas and Propagation good impedance bandwidth characteristics and a good isolation between the two antenna elements.Also, the antenna radiation pattern has been measured experimentally.It is matching the simulation results; the radiation gain of two antenna elements is greater than 3 dB.And, they are very similar as presented in Figure 14.

Conclusion
As presented above, one DGS-based wide-band robot positioning antenna and an array have been proposed.The antenna unit is primarily composed of four parts, i.e., optimized printed radiating sheet, periodic DGS structure, coaxial feed line, and supporting substrate.The printed radiating sheet has been separately optimized that enables the return loss of antenna to be lower than −10 dB and the far-field gain over 2 dB within the operation frequency range from 1.7 to 2.7 GHz.To test the performance of the antenna design, the spacing of two antenna elements is set at 0 mm and the phase angle separately as 0 °, 90 °, 180 °, or 270 °.Simulated result as well as measurements of fabricated prototypes presented that the proposed antenna array has good impedance bandwidth characteristics.Also, the maximum antenna gain exceeds 4.67 dB, with an essentially consistent radiating pattern, which indicates that the radiating performance of the robot  Lastly, the simulation results show that the positioning antenna system consisting of quad-element units can operate in the entire working frequency range of 1.7-2.7 GHz while providing an antenna gain of more than 8 dB, having good directionality.In short, the proposed small-sized positioning antenna in this study is simple in design, easy to combine, and with good performance and achieves one compact antenna-feed system.Thus, the proposed structure is suitable for compact robots.

Figure 6 :
Figure 6: Schematic diagram of a four-antenna array structure.0

Figure 7 :
Figure 7: S-parameter simulation of a four-antenna array structure.

Figure 8 :
Figure 8: Far-field pattern of a four-antenna array structure.

7
International Journal of Antennas and Propagation

Figure 9 :
Figure 9: Prototype of the antenna system using the proposed DGS.

Figure 10 :Figure 11 :
Figure 10: Measured S-parameters for a single unit.

Figure 12 :
Figure 12: The experimental model of the dual-element antenna array.

Figure 13 :Figure 14 :
Figure 13: Measured S-parameters of the dual-element antenna array.

Table 1 :
Geometric parameters of the antenna and its DGS structure (mm).