Effect of Storage Temperatures on the Moisture Migration and Microstructure of Beef

e eects of freezing temperature on the microstructure and moisture migration of beef were investigated, aiming to provide the potential theoretical basis for the beef storage. Drip loss, surface hydrophobicity, and secondary structure of myobrillar proteins, ice crystal, and microand ultrastructure of meat were analyzed at 4°C, −1°C, −6°C, −9°C, −12°C, and −18°C, respectively. Results indicated that the drip loss and surface hydrophobicity of samples stored at −12°C were signicantly lower than that stored at 4°C and −1°C (p< 0.05) and no signicant dierence with −18°C (p> 0.05). Result from Fourier transform infrared spectroscopy suggested that protein denaturation occurred after storage. ere was an increase in α-helices and decline in random coil at lower temperature (−12°C and −18°C). It was indicated that the samples stored at −12°C and −18°C could eectively restrain the denaturation of protein and maintain the stability of secondary structure. e analysis of the ice crystal and microand ultrastructure of the muscle indicated that the structure of samples stored at −12°C and −18°C had more integrity and was complete than that stored at 4°C and −1°C. e spaces (water “reservoir” and “channel”) where was the origination of drip were small. Furthermore, the results of low-eld nuclear magnetic resonance and H magnetic relaxation image showed that the freezing at −12°C could inhibit the migration of immobilized water to free water.


Introduction
Beef production and consumption are growing rapidly and emerging as an important source of protein in China to supply energy for humans due to rapid economic growth [1].Meanwhile, frozen technology is vital to meat process and plays an important role during the circulation, sale, and storage [2].Temperature and its uctuation in the process of storage will absolutely in uence the quality of frozen meat [2,3].Currently, the most common temperature used for meat preservation is from −18 °C to −40 °C [4].However, it consumes high amount of energy, and temperature abuse occurs frequently.Furthermore, it takes long time in thawing which leads to inevitable deterioration in quality of meat during the process [5], such as weight decrease, color deterioration, avour losses, texture changes, and high drip loss [6].An appropriate freezing temperature is critical to maintain "fresh" meat quality to the largest extent.
Beef contains roughly 75% of the total muscle mass, which plays a vital role in meat and meat products [7].About 85% of water content is located in the intramyo brillar space and 15% of water content is present outside the myo brillar network [8].Water in the meat tissue could be characterized by three distinct populations (states): bound water, immobile water, and free water [9].erefore, the changes in the state of water will lead to signi cant e ects on muscle structure and meat quality [10].Low-eld nuclear magnetic resonance (LF-NMR) has been e ectively used to analyze the state, mobility, and distribution of water in meat.A new freezing temperature zone (−6 °C to −12 °C) of beef was determined by LF-NMR, which falls between superchilling temperature (−1 °C) and conventional freezing (−18 °C).e effects of new temperature zone compared with conventional chilling (4 °C), −1 °C and −18 °C, on the quality and storage time of beef were analyzed in our previous study.However, the effect of different frozen temperatures on the water mobility and distribution of beef is unclear.Since the structure of myofibrillar protein and muscle is crucial for holding water in meat [11], it is important to know how the freezing temperatures affect the physicochemical properties and structural changes of protein that contribute to water holding and migration of meat.
e objective of this study was to investigate the effects of different temperatures on the microstructure and moisture migration of beef after storage.Drip loss, surface hydrophobicity, secondary structure of myofibrillar proteins, ice crystal, and micro-and ultrastructure of meat were analyzed at 4 °C, −1 °C, −6 °C, −9 °C, −12 °C, and −18 °C, respectively.

Materials and Methods
2.1.Materials.Samples of bovine longissimus dorsi were obtained from a 2-year-old bull weighing 400 ± 5 kg (Simmental × Mongolian cattle, Zhuo Chen Animal Husbandry Co. Ltd, Beijing, China).Samples were cut into 50 mm * 50 mm * 50 mm pieces after removing the visible fats, ligaments, and tendons.en, the samples were divided into two groups, one for the storage and other for low-field nuclear magnetic resonance (LF-NMR) analysis.e samples were assigned randomly to six groups and stored at 4 °C (10 d), −1 °C (24 d), −6 °C (84 d), −9 °C (126 d), −12 °C (168 d), and −18 °C (168 d), respectively.e storage time was decided according to the quality assessment of meat during storage.e drip loss, hydrophobicity, secondary structure of myofibrillar proteins, ice crystal, microstructures of myofibrillar proteins, and water mobility were determined after storage.

Drip Loss Analysis.
Drip loss was measured according to the method described by Lan et al. with slight modifications [12].Briefly, the initial sample weights were recorded before treatment.After storage, the samples were thawed at 4 °C overnight and reweighed after wiping drips from their surface.e percentage of drip loss was calculated according to the following equation: drip loss(%)

�
initial weight of raw material − weight after thawing initial weight of raw material × 100% . (1)

Myofibrillar Proteins Preparation. Myofibrillar proteins
were prepared from bovine longissimus dorsi according to the method of Park et al. and Li et al. [13,14].e purified myofibrillar protein isolate was stored in a tightly capped bottle and analyzed within 24 h.Protein concentration of the myofibril pellet was measured by the Biuret method using bovine serum albumin as the standard.
2.4.Hydrophobicity Analysis.Hydrophobicity of myofibrillar protein was determined using the hydrophobic chromophore bromophenol blue (BPB) according to the method of Chelh et al. [15].e amount of bound BPB was expressed as the difference between total and free BPB and used as an index of hydrophobicity: bound BPB (μg) � 40 μg × (OD control − OD sample) OD control . (2)

Secondary Structure of Myofibrillar Proteins Analysis.
e secondary structure of myofibrillar proteins was analyzed by Fourier transform infrared (FTIR) spectrometer (Bruker Optics, Germany) according to the method of Li et al. [9] with modifications [10].A Fourier transform infrared spectrometer equipped with MB-ATR (multibounce attenuated total reflectance) was used to obtain the spectra of myofibrillar protein.Samples of myofibrillar protein were scanned in 4000∼400 cm −1 spectral.In order to improve the signal-to-noise ratio for each spectrum, a total of 64 scans at 4 cm −1 resolution were collected and each spectral map was scanned 100 times.Background spectra were subtracted using the Opus software.PEAKFIT 4.2 software was used to unscramble the amide _ band, which ranges from 1600 to 1700 cm −1 spectrum.

Ice Crystal Observation.
e ice crystal was observed according to the method of Kaale and Eikevik with modifications [16].e samples were taken from the central part of each group sample, respectively, and cut along the muscle fiber direction using a surgical knife that was previously stored at each test temperature.Samples were about 10 mm in length and 5 mm * 5 mm in cross section and fixed using precooling stationary liquid (60% absolute ethanol, 30% chloroform, and 10% glacial acetic acid, v/v) for 20 h. e fixed samples were dehydrated using ethanol and n-butyl alcohol for 2 h at room temperature and then overnight in n-butyl alcohol.Paraffin-embedded samples were prepared under 60 °C and cut into cubes and slices that are 5∼10 μm thick by rotary microtome.After the samples were stained with hematoxylin-eosin, Olympus BX41 inverted biologic microscope (equipped with digital camera and image analysis software Image-Pro Plus 4.0 and 5.0) was used to shoot the typical image of the tissue.

Scanning Electron Microscope.
e microstructures of the samples were observed by scanning electron microscope (SEM) according to the method of Li et al. [6].e samples were cut into 3 mm * 3 mm * 5 mm and fixed with 3% glutaraldehyde overnight, rinsed 3 times in 0.1 M phosphate buffer (pH 7.2), and postfixed in 1% of osmium tetroxide at 4 °C for 2 h before being dehydrated with graded ethanol.
e dried samples were mounted on a bronze stub and 2 Journal of Food Quality sputter-coated with gold (Eiko IB-5, Hitachi, Tokyo, Japan).e microstructures of samples were observed with SEM (Quanta 200 FEG, FEI, the Netherlands) at a magnification of 500x.

Transmission Electron Microscopy.
e microstructures of the samples were observed by transmission electron microscope (TEM) according to the method of Li et al. [6].
e samples were cut into 4 mm * 4 mm * 2 mm and fixed with 2.5% glutaraldehyde, rinsed in the 0.1 M phosphate buffer (pH 7.4), and postfixed in 1% of osmium tetroxide at 4 °C for 2 h before being dehydrated with graded ethanol and acetone.e samples were later embedded in Spurr's resin, and sections were stained with both lead citrate and uranyl acetate.
e ultrastructures of samples were observed with TEM (H-7500, Hitachi, Japan) at a magnification of 25,000x.

Water Mobility Analysis.
e NMR probe for spin-spin relaxation time (T 2 ) was used.e T 2 values of the water protons in the samples were measured on a 0.5-Tesla magnet (PQ-001, Niumag Electric Corporation, Shanghai, China) using the Carr-Purcell-Meiboom-Gill (CPMG) sequences by biexponential fitting of the data to a linear combination of three exponentials in terms of relaxing time constant T 21 , T 22 , and T 23 .e measurements were taken at 32 °C.e τ-value (time between 90 °pulse and 180 °pulse) was 200 μs.Data from 8,000 echoes were acquired as four scan repetitions for each sample.e repetition time between the two succeeding scans was 1,000 ms. e multiexponential decay curve was obtained from NMR relaxation measurement using the mathematical model as follows: where A(t) is the amplitude size when attenuation to t; A 0i is the amplitude size when the first component balance;

Proton Density Images Analysis.
e proton density images of samples were stored through different methods and scanned using a MINI MR-60 instrument (Niumag Electric Corporation, Shanghai, China).e magnetic relaxation image (MRI) measurements were acquired as proton density images using MSE imaging sequence with the following parameters: time to repetition (TR) � 800 ms, time to echo (TE) � 18.2 ms, center frequency (SF) � 23.319 MHz, field of view (FOV) read � 50 mm, and FOV phase 50 mm.e samples were divided into four layers for analysis; the width of each layer was 1.8 mm, and slice gap was 0.5 mm.
Each image was acquired as a sum of eight scans.Images were converted to a BMP image format.Arbitrary colorscale surface plots were used to represent the distribution of water within the samples.e distribution of grey scale intensities in the MR images was analyzed using the Image Evaluation computer software (Shanghai Niumag Corporation).

Statistical Analysis.
All experiments were carried out at least in triplicate, and the values given below were the means of these triplicates except FTIR.Statistical analyses were performed using SPSS version 19.0 (SPSS Inc., Chicago, IL, USA).Significant differences were analyzed using one-way ANOVA and Duncan's multiple-range test at a significance level of 0.05.

Drip Loss Analysis.
e results of the drip loss are presented in Figure 1. e mean values of drip loss of the samples at different temperatures were around 3.31%-4.92%.Higher amounts of drip loss were observed in the group at 4 °C and −1 °C (p < 0.05).e drip loss of samples treated at the test temperature (−6, −9, and −12 °C) was significantly lower (p < 0.05) than that of samples treated at 4 °C and −1 °C.In addition, there were no significant differences (p > 0.05) between the drip loss of samples which were frozen at −12 °C and −18 °C.It was indicated that samples treated at −12 °C could maintain the WHC of samples effectively.In this study, the drip loss of samples corresponded with the reduction in hydrophobicity (Figure 2).

Protein Surface Hydrophobicity Analysis.
Surface hydrophobicity can be a suitable parameter to estimate protein denaturation, and higher protein surface hydrophobicity represents more protein denaturation [17].As shown in Figure 2 than that of samples at 4 °C and −1 °C.e BPB content of −12 °C at day 168 was 30.43 ± 0.16 μg, which had no significant differences (p < 0.05) with the −18 °C method, of which the BPB content is 28.45 ± 0.37 μg at day 168.It was suggested that the storage at −12 °C has an effective inhibitory action to protein surface hydrophobicity.e difference of surface hydrophobicity was due to conformation changes that are hydrogen bonds and disulfide bonds [17].Bound water that connected with protein and part of immobilized water easily transformed into free water, which causes the increase of drip loss.e results of surface hydrophobicity were consistent with the drip loss and the LF-NMR (Figure 1; Table 1 and Figure 7).

Secondary Structure of Myofibrillar Proteins Analysis.
FTIR was used to scan all the wave bands (400∼4000 cm −1 ) of samples.Multiple characteristic absorption bands will be formed in the infrared region, among which the amide _ is located in the 1600∼1700 cm −1 wave band [18], which is led by the stretching vibration of C � O. e wave band ranging from 1615∼1637 cm −1 and 1682∼1700 cm −1 is called β-sheet, 1646∼1664 cm −1 is called α-helix, 1637∼1645 cm −1 is called random coil, and 1664∼1681 cm −1 is called β-turn [19].As shown in Figure 3, the content of α-helix presented an increased trend from 4 °C to −18 °C (p < 0.05), while the content of β-sheet and β-turn was quite similar.And content of random coil at −12 °C and −18 °C was slightly higher than 4 °C and −1 °C.e stabilized α-helix structures were maintained by hydrogen bonds between -CO and NH-of a polypeptide chain [20].e reduction of α-helix at 4 °C and −1 °C illustrated that the stability of the secondary structure of myofibrillar protein like hydrogen bonds would be damaged.And the hydrophobic group that was expected to be inside the protein is exposed to the surface, which increased the protein surface hydrophobicity.ese results were expected to explain the reduced drip loss and surface hydrophobicity at −12 °C and −18 °C.

Ice Crystal Observation.
Both the amount and volume of ice crystals increased during frozen storage.e muscle cell would be squeezed seriously by ice crystal growth and caused irreversible influences [21].e muscle cell could hardly recover to their original status even after thawing and formed a "reservoir" and "channel".Figure 4 shows the ice crystal distribution of samples in different groups.Muscle bundles shrink, and obvious gaps and holes were observed in tissues after frozen storage.e gaps found while storage at −6 °C were obviously larger than samples at −9, −12, and −18 °C, respectively.It was suggested that the ice crystal growth at −6 °C samples was faster than the other 3 groups, causing even greater damage to the muscle tissues.Meanwhile, the volume of ice crystals at −12 °C and −18 °C had no significant difference.Muscle integrity can be maintained at −12 °C and −18 °C, which was consistent with the results of microstructure.erefore, sample stored at −12 °C and −18 °C showed higher water-holding capacity.

Microstructure Observation.
Current study analyzed the changes in the microstructures of muscle fibers at different storage temperatures by SEM and TEM.Muscle fibers of the 4 °C and −1 °C shrink critically after storage (Figure 5).e gap between fiber bundles was widened and exomysium was seriously fractured and separated.Diameter of muscle fibers in the two groups was enlarged and the structural integrity of the muscle fiber bundle was damaged.e loose structure and expanded muscle fiber structures cause the declining in Note.e data in the table are the average value ± standard deviation; a, b, c, and so on in the same column express that there are significant differences between different treatment groups (p < 0.05).6 Journal of Food Quality water-holding capacity, which ultimately leads to drip loss and deterioration of meat structure.e gaps between fiber bundles at −6 °C and −9 °C groups were widened due to the shrinkage of muscle fibers, but the exomysium was not fractured.Compared to the other groups, the muscle fiber structures of samples stored at −12 °C and −18 °C were more compact and well preserved, ensuring better water-holding capacity.e TEM diagram of microstructures by the end of each storage condition is shown in Figure 6.Muscle fibers were composed of multiple sarcomeres, and each sarcomere included 2 Z-lines (the region between two neighboring Z-lines was called one sarcomere).Sarcomere was the basic contractile unit of muscle, and the length of sarcomere was positively correlated with the water-holding capacity of muscles [6].e muscle fiber structures of samples stored at 4 °C and −1 °C were uneven with sarcomere dislocation, and Z-line disintegration.A-bands, I-bands, and Z-lines in Figure 6 are obvious.e results showed that the sarcomere shortening, light Z-lines distorting, and the bandings were less regular than that of samples stored at −12 °C and −18 °C.Some spaces would be formed due to the results.e drip was discharged from the spaces and formed drip loss.

Water Mobility Analysis.
e change of muscle fiber structure leads to the migration of the muscle water distribution during storage.Based on LF-NMR results, the water in samples was characterized by three forms: bound water (0.1∼10 ms), immobilized water (10∼100 ms), and free water (100∼1000 ms) [22,23].e relative percentages of the three waters were represented as P 21 , P 22 , and P 23 , and the results are shown in Table 1.
P 21 was rather low, and no significant differences (p < 0.05) were found among these groups, which means that the storage has little influence on the bound water in samples.
is result was consistent with the findings reported by [24].e result of P 22 showed that samples in 4 °C and −1 °C groups had significantly lower content of immobilized water (p < 0.05) compared to the samples stored at −6, −9, −12 and −18 °C groups.Contrary to the content of immobilized water, the free water content (P 23 ) of 4 °C and −1 °C groups was significantly higher (p < 0.05) than the other groups.e results suggested that the frozen state of −6, −9, and −12 °C was nearly the same and particularly, no significant difference (p > 0.05) was found between free water content of −12 °C and −18 °C.

Proton Density Images of Muscle Analysis. MRI can
readily show the distribution of H-proton inside the tested materials without damaging the proton [25,26].e deeper red color represents higher H-proton density, and the deeper blue color stands for lower H-proton density [27].As shown in Figure 7, image colors of the samples showed obvious changes after thawing.e 4 °C group had the most region of red color, which means it had the highest H-proton density (means it had the highest free water content); the −1 °C group ranks the second, and then followed by −6, −9, −12, and −18 °C groups.e images of samples stored at −12 °C and −18 °C showed a rather blue color, which means that, compared to other groups, the free water content was lower, and water migration was slower in these two groups.e hydrogen proton density images were in agreement with LF-NMR results.

Conclusions
Freezing at −12 °C and −18 °C could effectively reduce the denaturation of beef protein.It showed the increase in α-helices and decline in random coil for samples stored at −12 °C and −18 °C, suggesting a stable secondary structure and increased water-holding capacity.Moreover, freezing at lower temperatures could inhibit the migration of immobilized water to free water.

Figure 1 :
Figure 1: Changes of drip loss at different storage temperatures.Values are expressed as mean ± standard deviation.Same letters above the bars indicate no significant difference (p > 0.05).
is the decay time; and T 2i is the relaxation time of the I relaxation component.Distributed multiexponential fitting of CPMG decay curves were performed using MultiExpInv Analysis software (Niumag Electric Corporation, Shanghai, China).P 21 , P 22 , and P 23 were used to represent the percentages of T 21 , T 22 , and T 23 , respectively.P 21 , P 22 , and P 23 (the areas under each peak) were determined by cumulative integration.

Table 1 :
LF-NMR-T 2 analysis of beef three water populations over different storage temperatures.