Investigating Enzyme Activity of Immobilized Candida rugosa Lipase

Candida rugosa lipase is a food-grade enzyme that is extensively utilized in the dairy processing industry for milk fat hydrolysis. e enzyme is mainly employed to modify the fatty acid chain length that results in the enhancement of avors. e hydrolytic activities of C. rugosa lipase (fungal source) in its free and immobilized forms were investigated at dierent pH and temperature settings. e main objective of this study was to understand how dierent support materials (Celite-545, Sephadex G-25, and chitosan) and immobilization techniques alter lipase activity and stability. Our results indicated that hydrolytic activity increased signicantly with immobilization on Celite-545. In general, immobilization resulted in considerable improvements in the stability of the enzyme with variations in pH and temperature. Immobilization on Celite-545 led to the highest catalytic eciency. Remarkable improvements in the recovery and reusability of the immobilized lipases were noted. Comparatively, the acetone immobilization procedure resulted in higher activities than alcohol immobilization. In conclusion, the activity of C. rugosa lipase was enhanced most signicantly when immobilized on Celite-545 using acetone as an adsorption solvent.


Introduction
During the last two decades, the use of lipases in the food industry has increased due to the increased attention in the products that are more natural.e major application of lipases in food industries involves biocatalysis of lipids especially fats and oils.ey are mainly used for enhancing the avor components during the production process of various products such as cheese, butter, salad dressings, sauces, and soups.
e potential of lipases to work on a broad spectrum of substrates and their stability when subjected to wide ranges of pH, temperature, and organic solvents are chief reasons for their use since these properties support catalysis with lowered side reactions and reduce costs for waste treatments.Also, food avor components synthesized with solvent-free techniques have superiority (compounds with no solvent impurities) for being safe in making delicious foods.Moreover, lipasemediated reactions involving ester interchange can be utilized for attaining appropriate avor esters [1].
C. rugosa lipase is a lipolytic food-grade enzyme that is synthesized using the controlled fermentation technique.
is enzyme catalyzes the hydrolysis reaction of triglycerides, resulting in the production of mono-and diglycerides, glycerol, and free fatty acids.Lipase from C. rugosa is distinctive in its reactivity where it displays no positional speci city and results in e ectual fatty acid hydrolysis from all three positions in the triglyceride.Lipase is also utilized for catalyzing esteri cation and acidolysis reactions (transesteri cation reaction) that result in the production of fatty acid esters and structured lipids, respectively.is lipase shows wide substrate speci city on the fats and oils of both vegetable and animal origins.C. rugosa lipase aids in the avor development in Italian cheese, ripening acceleration in Cheddar cheese, flavor improvement in processing blue cheese, and enhancing creamy flavor in butter oil.e enzyme principally results in the synthesis of short-chain fatty acids (C 4 and C 6 ) which are the prime components for tangy sharp flavor [2].
Reactions involving C. rugosa lipases are more environmentaffable relative to some bulk chemical syntheses since the operation of lipase-catalyzed reactions nearly resembles that of natural metabolic pathways.Lower activation energies of lipasemediated processes allow them to convert their reactants to end products by utilizing mild temperature and pH conditions, thus resulting in lower energy consumption.e enzyme is also stable in organic solvents and does not require any cofactors.
Despite its beneficial and productive uses, the employment of C. rugosa lipases for commercial industrial purposes faces some challenges.e harsh conditions of industrial processes usually lead to destabilization, thereby shortening its industrial lifespan.Other drawbacks include sensitivity to process controls, low solidity, and the tendency to be constrained by high concentrations of reactants [3].Krajewska [4] stated that the strenuous recovery and reuse of an enzyme is also a challenging task since the powdered form of enzyme can form an emulsion, which results in significant loss, with their recovery from the reaction system being very low [5].
In addition, the interactions between amino acid residues in the core of a protein's sequence are not fully optimized and as such only attain the minimal prerequisites for their required functioning [6]. is suggests the need for methods that can improve the functionality of the enzyme.One such method is enzyme immobilization.Immobilization improves the stability and ease of enzyme recovery after a reaction and thus contributes to reduced production cost since the enzyme can be reused [7].Although the technique of enzyme immobilization has become widespread, some commercial lipase enzyme products still exist in the free form-not immobilized [8,9].e immobilization has the potential for improving the activity, specificity, and stability of lipases as well as the ease of separating the enzyme from reaction products.In addition, the reusability of the immobilized enzyme is bound to reduce operational cost [10].
e properties of the support material matrix are predominant attributes that control the efficaciousness of the immobilization process.e matrix materials can modify the mechanism and the partitioning of the reactant and product components that are present in the reaction mixture and, because of which, they would influence the chemical properties, stability, and the activity of the enzyme.ree support materials were used in the study: Celite 545, Sephadex G-25, and chitosan.
Celite 545, also known as diatomaceous earth, is a naturally occurring rocky substance.It exists in the earth as a soft siliceous rock that can be effortlessly disintegrated into fine powder.Generally, the color of the material ranges from off-white to whitish.Due to its high porosity, the density of the material is very low.Its characteristic chemical composition includes silica (80-90%), alumina (2-4%), and iron oxide (0.5-2%) along with some fossil remains of diatoms, which are a type of algae.e material is hydrophobic in nature.Sephadex is a beaded material that is utilized for gel filtration techniques.It is synthesized by crosslinking dextran (a polysaccharide) with epichlorohydrin.
e degree and the extent of the crosslinking reaction can be controlled, resulting in variations in the degree of polymer gelation.Hence, five different types are available based on their sizes, with G-10 consisting of smaller molecules and G-75 of the larger ones.e research was studied on Sephadex G-25 which is relatively smaller of all types.is support material is hydrophobic and generally available in three different particle sizes: fine, medium, and coarse.Chitosan is a carbohydrate molecule made of D-glucosamine and N-acetyl glucosamine linked through β-1,4 linkages.It is a hydrophilic substance that is available in fine powder form.ese support materials were chosen in order to understand the C. rugosa lipase activity when immobilized on both hydrophilic and hydrophobic support materials.e research was performed on the basis of the previous study [11], in which the LIP1 enzyme which is an isoform of C. rugosa lipase was studied, when immobilized on the two hydrophobic supports Celite and Sephadex.
e main objective of this study was to immobilize C. rugosa lipase, a commercially available enzyme, on different support materials by using physical adsorption techniques.
e supports materials were Celite 545, Sephadex G-25, and chitosan.Acetone and alcohol immobilizations were utilized for physical adsorption of the lipase to the support materials [12].e effects of pH and temperature variations on the hydrolytic activity of the immobilized enzymes were examined.e variations exhibited by immobilized lipases in the esterification and acidolysis reactions were investigated as was the reusability of the immobilized lipases.

Ethanol Immobilization.
Twelve grams of support materials was first mixed with 20 mL of ethanol for 18 hours at static condition and room temperature (20 °C).Wet supports were then mixed with a 60 mL of sodium phosphate buffer (pH 7) and 3 g of the enzyme, keeping them in a shaking water bath at 30 °C and 120 rpm for 12 hours.e immobilized lipase on the support was then filtered under vacuum, dried at 35 °C-40 °C for 72 hours, and stored at 4 °C [13].
Briefly, 3 g of the enzyme was dissolved in 60 mL of 10 mM sodium phosphate buffer (pH 6).e resulting solution was mixed with 12 g of the carrier.en, 240 mL of cold acetone (−20 °C) was added.e mixture was stirred for 30 min at room temperature (20 °C) before it was filtered by suction, washed with 60 mL of cold acetone (10 °C), and dried in an oven (25 °C) for 72 hours.e powdered form was stored at 4 °C.

Protein Content.
e protein content was estimated using the FlashEA Nitrogen/Protein Analyzer (CE Elantech, Inc., Lakewood, NY) at USDA-ERRC, Wyndmoor, PA.After obtaining the percentage of nitrogen in the sample, a protein factor (6.25) was used to calculate the percentage of protein [15].e samples to be analyzed were weighed in tin plates which were loaded in the analyzer along with a blank tin plate.
e machine was calibrated with three different weights of aspartic acid.e samples were then heated, using a dynamic flash combustion technique which is a modified Dumas test that converts the samples to elemental gases.e percentage of nitrogen was then estimated by a detector.

Hydrolytic Activity.
e hydrolytic activity of the lipase enzyme was assayed by preparing 200 mL of 10 mM sodium phosphate buffer of varying pH with 15% w/v of the olive oil emulsion.Gum arabic was added to the mixture at 5% w/v to act as an emulsifier.About 10 mL of the resulting emulsion was then incubated with 500 mg of each lipase at varying temperatures for 1 hour.After incubation, the products of reaction were titrated against 0.5 M NaOH with 1% phenolphthalein as an indicator.e amount of fatty acid released was estimated by calculating the difference in the volumes of titration (titer values) between samples and the blank.e time course analysis was also performed.All reactions were performed in triplicates.
e activity was calculated using the following formula: where V is the difference in the titer values between the blank and samples, M is the molarity, and W is the weight of lipase.e specific activity of the lipase was calculated by estimating the ratio of hydrolytic activity to the amount of protein.

Esterification Activity.
Glycerol (1 g) and caprylic acid (1.27 g C 8 H 16 O 2 ) were chosen as reactants which were incubated with free lipase and its immobilized forms at 10% w/w.e reaction was carried out for 12 hours in screw-cap test tubes in an orbital shaking water bath at 40 °C with a speed of 200 rpm.In order to pace up the reaction rate, the water produced in the reaction was absorbed by the addition of a total of 30% (w/w) of molecular sieves (4 Å in diameter, 8-12 mesh).e reaction was halted by the addition of 1 mL of methanol.After the reaction, the products from the screwcap test tubes were titrated against 1.0 M sodium hydroxide with 1% phenolphthalein as an indicator.All reactions were performed in triplicates.Esterification activity is defined as the amount of enzyme that is consumed per minute per milligram of lipase in the reaction.e esterification activity was calculated using the following formula: where V is the difference in the titer values between the blank and samples, M is the molarity, and W is the weight of lipase.

Acidolysis Reaction.
Structured lipids were produced in triplicates by an acidolysis reaction.One gram of olive oil and 0.3 g of caprylic acid were combined in screw-cap test tubes prior to adding lipase enzymes at 10% by weight of total reactants and placing them in an orbital shaking water bath at 45 °C and 200 rpm for 12 hours.in-layer chromatography (Fisher Scientific, Pittsburgh, PA) separated the triacylglycerol bands.e bands corresponding to TAGs were scrapped off and modified to fatty acid methyl esters (FAMEs) using the boron trifluoride (BF 3 ) method: 2 mL of 0.5 M NaOH in methanol was added to the TAG bands at 90 °C in screw-cap test tubes for 10 min followed by the addition of 14% BF 3 in methanol for another 10 min.FAMEs were extracted with 2 mL of hexane and then analyzed in parallel with a FAME standard (Supelco 37 component FAME Mix; Supelco, Bellefonte, PA), using the Agilent Technology 6890N Gas Chromatograph (Agilent Technologies, Inc., Wilmington, DE). e amount of caprylic acid that is incorporated after the reaction was estimated by analyzing different amounts of FAMEs which were integrated by an online computer.e area of the sample peak and the internal standard peak in the gas chromatogram were used to calculate the amount of fatty acids.e ratio of the incorporated amount of caprylic acid to the total amount of fatty acids present in the olive oil was established to determine the percentage of incorporated caprylic acid.

Protein Content.
e percentage of protein in the lipaseimmobilized support materials is an indication of the degree of immobilization achieved in our study.e percentage of protein (Table 1) found in the free form of C. rugosa lipase was 8.17%, which is consistent with the findings of Gitlesen et al. [16] and Ozturk [2] who reported 9.2% and 8.67% of protein, respectively.Based on our results (Table 1), the protein content of the samples was dependent on the type of the support material and the method of immobilization.Acetone-immobilized samples yielded a higher protein content than alcohol-immobilized samples, which could be due to the difference in solvent polarity.Differentiation on the basis of the support material used revealed that lipase immobilized on Celite-545 resulted in the highest amount of protein, whereas lipase immobilized on chitosan resulted in the least amount of protein, with lipase immobilized on Sephadex G-25 yielding an intermediate amount.e very low protein content of the lipase immobilized on chitosan may have been due to chitosan's hydrophilic nature.Lipase, being hydrophobic in nature, binds readily to hydrophobic support materials such as Celite or Sephadex.erefore, we concluded that the applications of acetone and Celite-545 were the most suitable for the immobilization process.

Hydrolytic Activity.
e hydrolytic activity of lipases was calculated by titrating the reaction products with 0.5 M NaOH solution to determine the amount of fatty acids released.
e speci c hydrolytic activities of Celiteimmobilized lipase samples were signi cantly higher than those of other immobilized support materials or even the free enzyme (Figure 1).Lipase immobilized on Sephadex G-25 demonstrated a slightly increased speci c activity compared to the free enzyme.Various authors suggested that the immobilization of lipases with appropriate support materials has proven to enhance the catalytic properties [17].According to Patrick [17], physical adsorption on matrix materials not only improves the stability of enzymes but also promotes the catalytic e ciency by improving the interfacial speci cities and substrate binding ability.
Comparing the hydrolytic activity of the di erent immobilization methods, acetone immobilization resulted in higher speci c activities on all immobilized supports than alcohol immobilization.
e speci c activities of alcoholimmobilized samples did not di er signi cantly from the free enzyme activities.Wu et al. [18] studied the e ect of di erent polar solvent treatments during immobilization of lipases from three microbial sources, namely, C. rugosa, Mucor javanicus, and Rhizopus oryzae, on support materials.ey were immobilized on Amberlite support materials by physical adsorption using di erent polar solvents that included acetone and ethanol along with 17 other organic solvents.ey also found that acetone-immobilized samples demonstrated the highest activities among all other solvents, while ethanolimmobilized samples showed signi cantly lower values.is could be due to the lower polarity of acetone when compared to ethanol and suggests that acetone is a better solvent for physical immobilization of support materials.

E ect of pH on Hydrolytic Activity.
e surrounding microenvironment can control enzyme activity.e pH of a solution plays a pivotal role in achieving an optimum amount of fatty acids during the hydrolysis reaction because the tertiary protein structure is controlled by hydrogen bonding interactions among the R groups of amino acids.
e ionization of these R groups can be altered by a small change in the pH value, disrupting the original native conformation, thereby resulting in the loss of enzymatic activity.e product inhibition becomes signi cant, causing a decrease in the reaction rate.Hence, every enzyme has a favorable pH range that preserves the native structural conformation and therefore its activity [19].Generally, immobilization modi es the optimal pH of the enzyme, which may be bene cial.
In this study, the di erences in hydrolytic activity of all enzymes as a function of pH were investigated.As plotted in Figures 2 and 3, C. rugosa lipase in its free form was less active at both lower (acidic) and higher (basic) pH values, potentially due to the structural changes caused by the variation in pH.According to Akova and Ustun [20], the cysteine amino acid residues of the enzyme can be moderately damaged due to β-elimination in alkaline solutions, whereas in the acidic solutions, the easily breakable peptide bonds that are adjacent to the aspartic acid residues are hydrolyzed.Montero et al. [21] reported a higher probability of protein aggregation in an acidic pH, speci cally higher molecular weight proteins because of their hydrophobic nature.e enzyme in its free form was most active at pH 7.0, as also reported by Fadiloglu and Söylemez [22] and Ozturk [2].For enzyme immobilization on Celite, the highest hydrolytic activity was observed at pH 7.0 for both acetone-and alcohol-immobilized enzymes, respectively.e optimal pH levels for lipases immobilized on Sephadex with acetone and alcohol were 6.5 and 6.0, respectively, and the optimal pH for lipase immobilized on chitosan were 7 and 6.5, respectively.Overall, it can be concluded that the activity of enzyme immobilized on Celite by acetone immobilization was comparatively stable at acidic and alkaline pH. is gives us an advantage of utilizing the enzyme for various reactions that may require varied pH conditions.Journal of Food Quality of the substrate reactants increases when raising the temperature, but this substantial e ect on the catalytic rate is limited as temperature-dependent enzyme denaturation becomes more signi cant.At an enzyme-speci c temperature, an even small increase in the temperature can lead to so much denaturation that the loss of enzyme activity results in decreased product formations.In this study, the speci c hydrolytic activity of all enzymes was determined at di erent temperatures ranging from 40 °C to 80 °C.Except for lipase immobilized on chitosan using acetone adsorption, all lipases demonstrated the highest activity at 45 °C (Figures 4 and 5), suggesting that immobilized enzymes were signi cantly more active at higher temperatures than the free enzyme.Unimmobilized C. rugosa lipase lost 80% of its activity at 80 °C.Similar to unimmobilized C. rugosa lipase, around 72% of the speci c hydrolytic activity was lost by both Sephadex-immobilized lipases at 80 °C.e immobilization on Sephadex conferred less thermal stability to the lipase than immobilization on chitosan, which showed a 53% reduction in enzymatic activity at 80 °C, and on Celite with approximately 60% reduction.Although immobilization on chitosan showed little activity, it conferred signi cant thermal stability to the lipase.

Timeline and Kinetics of Hydrolytic Activity.
e rate at which an enzyme catalyzes a reaction is crucial to its progress.Every enzyme has its own rate phenomena in the conversion of substrates into products.Enzyme kinetics explains the catalytic behavior of enzymes.In this study, the e ect of support materials on the rate of enzyme catalysis was measured through a time-course study of the hydrolysis reaction.
e hydrolytic activities of free and immobilized lipase enzymes were analyzed over an extended period of time until 16 hours to determine the progress of catalysis.As presented in Figures 6 and 7, the amount of fatty acids produced by all the samples increased with the reaction time.At a constant temperature and pH, changing the substrate concentration resulted in varying amounts of fatty acids.Two di erent substrate concentrations were chosen to explain enzyme kinetics, using the Michaelis-Menten equation.With two values for initial velocities and substrate concentrations, V max and K m values of the reactions could be established (Figure 8).
e Michaelis-Menten equation determines the rate of reaction: V where V rate of the reaction, [S] substrate concentration, V max maximum rate that can be achieved, and K m substrate concentration at half of V max .K m can also be de ned as the substrate concentration at which half of the enzyme's active sites are utilized by the substrate.e higher the K m value, the higher the amount of substrate required to saturate the enzyme and therefore the lower the a nity of that enzyme for the substrate.e V max value indicates the maximum reaction speed.
e initial hydrolytic velocity of the samples at di erent substrate concentrations was estimated from the slope of the line.e two constants, V max and K m , of the Michaelis-Menten equation were determined for all enzymes by solving the two substituted linear equations with the two unknowns.
e calculated V max and K m values of these samples are reported in Table 2.
e ratio of the Michaelis-Menten constants allowed the calculation of the catalytic e ciency of the enzymes.
e catalytic e ciency of lipase immobilized on Celite supports was signi cantly higher than that of other enzymes, suggesting that the maximum rate of reaction can be achieved with a lower substrate concentration.Free lipase and Sephadeximmobilized lipase demonstrated similar catalytic e ciencies.Hence, immobilizing C. rugosa lipase on Sephadex could add to the cost of reaction if other factors such as pH and residual recovery are not considered.Chitosan-immobilized lipase, being less capable of binding to the support, resulted in lower catalytic e ciency and may not be suitable for immobilization of C. rugosa lipase with a physical adsorption technique.

Esteri cation Activity.
Percentage esteri cation was estimated as the ratio of moles of caprylic acid consumed in the reaction to the number of moles of initial caprylic acid.
e reaction between 1 g of caprylic acid and 1.27 g of glycerol in the presence of C. rugosa lipase was carried out at 40 °C for 12 hours at pH 7. C. rugosa lipases in both free and immobilized forms were moderately successful in achieving appreciable ester conversion rates.Average percentages ranging from 28 to 72% esteri cation were achieved during 12 hours of this experiment (Table 3).
Although appreciable amounts of esters were formed, the immobilization procedure was not able to signi cantly improve speci c activity.e speci c esteri cation activity of free lipase and Celite-immobilized lipase did not di er signi cantly.Lipase immobilized on chitosan and Sephadex resulted in lower speci c activities.Chitosan-immobilized lipase, being hydrophilic, has less lipase-binding capacity,      Journal of Food Quality resulting in lower esteri cation activity.
e signi cantly lower speci c esteri cation activities of Sephadex-immobilized lipases are not well understood and should be further investigated.
Lumor and Akoh [11] reported that C. rugosa lipase had no signi cant esteri cation activity at 60 °C for 1 hour.Since the enzymes in this study showed considerable ester formation at 45 °C for 12 hours, further optimization of reaction conditions might obtain even higher ester yields.

Acidolysis Reaction.
Acidolysis reaction, one of the reactions catalyzed by lipase enzymes, can result in the development of novel structured lipids used to incorporate a desirable fatty acid into an oil/fat to improve its nutritional value.e goal here was to study how lipase immobilization a ects this reaction, determining the degree of incorporation of caprylic acid into olive oil.Caprylic acid is not present in olive oil but is found in coconut oil, corn oil, and palm kernel oil and in trace amounts in grape seed oil.e acidolysis reaction of 0.3 g of caprylic acid and 1 g of olive oil was carried out at pH 7.0, at 45 °C, and at 200 rpm for 12 hours.e reaction did not yield signi cant results with about 0.03%-0.16% of the fatty acid per unit protein incorporated into olive oil samples (Table 4).Srivastava et al. [23] successfully incorporated oleic acid and palmitic acid into milk fat by a transesteri cation reaction in the presence of C. rugosa lipase.e reason for lower incorporation of caprylic acid by C. rugosa lipases could be due to fatty acid selectivity.
Although the enzyme incorporation of caprylic acid was low, acetone-immobilized Celite-545 was capable of incorporating a slightly higher percentage, while immobilization on the two other support materials resulted in lesser incorporation of caprylic acid when compared to the free enzyme.C. rugosa lipases seem more e cient in catalyzing the incorporation of long-chain unsaturated fatty acids such as oleic acid than medium-chain saturated fatty acids such as caprylic acid.Further study using long-chain unsaturated fatty acids might help us estimate the e ect of immobilization.

Residual Activity.
Although the use of enzymes in industrial production improves the quality of the reaction products, the expense of enzymes compared to chemical catalysts usually makes the enzymatic process una ordable.By immobilizing enzymes, they can be reused and thereby minimize production cost.In this study, all the enzymes-both free and immobilized-were reused up to six times to determine residual activity.
e enzyme in the product mixture was ltered at room temperature and washed in two steps with the 10 mM sodium phosphate bu er solution followed by washing with n-hexane twice.
Retaining and recovery of free enzyme from the mixture was not accurate due to its miscible nature.Hydrolytic activities of the enzymes were determined, and residual activity was calculated.
Free enzymes retained signi cantly less enzymatic activity than the immobilized enzymes (Figure 9) due to their inability to recover the powdery form of the free enzyme adequately after each reaction cycle.e free enzyme lost 99.3% of its activity after six successive cycles (Table 5), while losses in the enzymatic activities of the immobilized enzymes after 6 cycles ranged from 38.2% to 61.1%.Lipase    [24] reported similar results when they examined storage stability and reusability of immobilized enzymes and found that the immobilized enzymes showed higher stability after 10 cycles of reuse than the free enzyme.To determine the storage stability, the authors stored all enzymes in a phosphate buffer for 30 days and reported that free enzymes retained only about 30% of their activity, whereas the immobilized enzymes retained all of theirs.In another study, Alagoz et al. [25] immobilized Candida methylica formate dehydrogenase on glyoxyl agarose-, glyoxyl silica-, and aldehyde-functionalized Immobeads.After 5 cycles of reuse, the researcher reported that the free enzyme lost around 88% of activity, while the immobilized enzymes lost only 50-60%.

Conclusion
e current research examined the activity of C. rugosa lipase when immobilized using acetone or alcohol on three different support materials (Celite-545, Sephadex G-25, and chitosan).Of the two solvents, acetone was more effective in the immobilization process due to its lower polarity.e hydrolytic activities of the enzymes, both free and immobilized, under different pH and temperature conditions allowed to optimize the reaction conditions and to analyze the degree of stability provided by the support materials.C. rugosa lipase immobilized on the Celite-545 support material exhibited significantly greater activity than all the other immobilized enzymes in terms of hydrolytic reaction, fatty acid incorporation, and stability at varying pH and temperatures along with good recovery and reuse qualities.Sephadex G-25 did not perform well as expected.e specific hydrolytic activities of immobilized Sephadex G-25 were comparable to those of the free enzyme, suggesting that its use as a support material provides no economic benefit.Moreover, it did not exhibit either significant ester formation or thermal stability.Immobilized chitosan displayed very low activity values due to its less porosity.However, the support material conferred good stability on the enzyme concerning temperature variations.In conclusion, the activity of C. rugosa lipase was enhanced most significantly when immobilized on Celite-545 using acetone as an adsorption solvent.Per our study, the acetone-immobilized C. rugosa lipase can be utilized in the oil/fat industry for hydrolysis reactions to achieve an improved quality and quantity of hydrolysis products and reduced resource wastage and manufacturing costs.

Additional Points
Practical Application.C. rugosa lipase is used for producing glycerol and fatty acids which help in enhancing the flavor in food substrates such as milk, butter, cheese, ice, and cream.
Even though the enzyme can be synthesized commercially, the higher cost is the prime factor to achieve successful application [26].Immobilization improves the stability and ease of enzyme recovery after a reaction and thus contributes to reductions in production cost since the enzyme can be recycled.Although the technique of enzyme immobilization has become widespread, some commercial enzyme products still exist in the free form-not immobilized [9].e immobilization of these enzymes, especially lipases, would be beneficial to the field of lipid chemistry.is has the potential for improving the activity, specificity, and stability of the enzyme as well as the ease of separating the enzyme from reaction products.In addition, the reusability of the immobilized enzyme is bound to reduce operational cost [10].

Table 1 :
Percentage of protein after lipase immobilization on di erent support materials.

Table 4 :
Percentage of caprylic acid incorporated into olive oil samples.

Table 5 :
Percentage loss of enzymatic activity after six successive uses.