A Three-Dimensional OFDM System with PAPR Reduction Method for Wireless Sensor Networks

A three-dimensional (3D) orthogonal frequency division multiplexing (OFDM) system with peak-to-average power ratio (PAPR) reduction method for the wireless sensor networks (WSNs) is presented. The transmit power of wireless nodes in an ad hoc network is strictly limited. Thus, high PAPR of the 3D OFDM system is a possible drawback when it is considered as a physical layer transmission scheme for the WSNs. Here, we propose an improved partial transmit sequence (PTS) technique to reduce PAPR of the OFDM system with 3D modulation formats. In the proposed algorithm, the components of 3D signals are assigned to different subblocks using a diagonal rule (DR), increasing randomness of the signals in the disjoint subblocks forcibly. As a result, the proposed method reduces PAPR of the 3D OFDM system significantly without increase in computational complexity. Hence, the proposed algorithm makes the 3D OFDM system be a possible candidate for a physical layer transmission scheme in future WSNs.


Introduction
Nowadays, internet of things technique has been developed rapidly.Some transmission scenarios of wireless network have extensive applications such as wireless ad hoc and sensor networks [1,2].The wireless sensor networks (WSNs) as a member of internet of things are being concerned closely.To build a framework for the protocol of three-dimensional (3D) WSNs, a lot of researches on developing new emerging applications and technical specifications are going on in the world.To accommodate various services in the 3D WSNs, many practical issues have to be discussed.A flexible digital communication scheme for the physical layer is one of the issues.According to the required characteristics, available resources, and restricted constraints such as data rate, bandwidth, and power control, several transmission schemes can be a challenging technique for realizing the distributed sensor networks.As a possible candidate for practical transmission of data in the physical layer of the 3D WSNs, orthogonal frequency division multiplexing (OFDM) is considered in this paper.
The OFDM has been studied extensively ( [3,4], and the references therein) as a reliable and high-rate digital transmission method.It is well-known to have high spectrum efficiency as well as robustness against the adverse effects of multipath fading that are one of the main causes of significant performance degradation in wireless communication environments.With elaborate use of the guard interval, intersymbol interference (ISI) can be removed completely [5].Due to such desirable characteristics, the OFDM has already been exploited to realize a physical layer transmission scheme for high-rate wireless networks such as IEEE 802.11 series [6] and IEEE 802.15.3 [7].
Recently, an OFDM system with 3D signal mappers (called 3D OFDM in this paper) has been introduced [8].Here, 3D signal constellations are exploited as a signal mapper.To modulate a lot of 3D subcarrier signals at the same time, a 2D inverse discrete Fourier transform (IDFT) (or a 2D fast Fourier transform for reduction of computational complexity) is adopted.Such a new OFDM system has been proved to have better symbol error performance than 2 International Journal of Distributed Sensor Networks the conventional 2D one.In addition, some higher-level 3D signal constellations having a lattice structure have also been presented to realize high-quality and high-rate wireless communications [9].
In general, both transmitter power and receiver sensitivity are important measures of a data transmission system in the WSNs.This implies that power consumption of the nodes in wireless ad hoc networks tends to be extremely limited.By the central limit theorem, amplitudes of the modulated OFDM signals have a complex Gaussian density function.Thus, signals with very high peak power can be generated by the IDFT modulation.High peak-to-average power ratio (PAPR) is an obstacle for practical applications of the OFDM system.In the case of 3D OFDM, the overlapping of sinusoidal signals is increased in modulation, which results in higher PAPR than the conventional 2D OFDM system.Therefore, an appropriate PAPR reduction method should be developed to realize the high-quality wireless networks.
In the several previous studies on the OFDM system, a number of PAPR reduction algorithms such as amplitude clipping, selective mapping (SLM), coding, and partial transmit sequence (PTS) have been proposed [10][11][12][13][14][15].The clipping method, which is the simplest way in concept, limits the peak amplitude of transmitted signals to a certain threshold value.However, it is difficult to control the out-of-band radiation caused by intermodulation after transmit filter.In addition, a careful choice of clipping threshold has to be required [10].In a coding scheme, a set of specially designed data streams which have low peak power is transmitted [11,12].We can select and fix a set of codewords which possibly guarantees PAPR of the transmitted signals lower than a specific value.The number of subcarriers is generally much larger than the codeword length.Since the codeword length is not long enough, some codewords can be transmitted repetitively.It has been proved in [12] that every repetition of the same codeword increases PAPR of the OFDM system by 3 dB.In PTS scheme, all subcarriers are divided into several disjoint subblocks.Each subblock is modulated independently and multiplied by a phase rotation factor to generate different signals carrying the same information.Consequently, a final transmit sequence is made with an optimal combination of modulated subblock signals and a set of phase rotation factors.Though the PTS scheme requires more computational complexity than others, it can reduce the PAPR without any signal distortion [13,14].
In this paper, a diagonal-rule (DR) algorithm combined with PTS technique is proposed to reduce PAPR of the 3D OFDM system.It is well known that three kinds of subblock partition schemes (SPSs) such as interleaved, adjacent, and pseudo-random methods have been employed to assign subcarrier signals into disjoint subblocks.In the proposed scheme, DR of signal distribution is followed to generate each subblock based on the conventional SPS methods.Since the pseudo-random SPS generally provides the best PAPR reduction performance from the three partition methods, a key feature of the proposed DR SPS is to generate the subblocks closed to a pseudo-random distribution.Simulation results show that the proposed DR-PTS scheme can reduce the PAPR of 3D OFDM system significantly.Especially, the new algorithm with the DR interleaved scheme has remarkable improvement as compared to the adjacent and pseudo-random method.Both computational complexity and searching procedure keep the same as the conventional PTS technique.
The remainder of this paper is organized as follows.In Section 2, the 3D OFDM system is introduced briefly, and the definition of PAPR is given.In Section 3, we show how the conventional PTS technique with subblock partition methods can be applied to the 3D OFDM system.The proposed DR based PTS scheme is also explained in detail.The results of computer simulation and their analysis will be discussed in Section 4. Finally, some concluding remarks are drawn in Section 5.

The 3D OFDM System
In a 3D OFDM system, a 3D signal constellation is exploited to map a binary sequence to the corresponding symbol.Each symbol in a 3D modulation format can be represented as a column vector   = (      )  , 0 ≤  ≤  − 1, where  is the size of a signal constellation (or equivalently the number of symbols in a signal constellation) and  is the transpose operation., , and  are the coordinates of a symbol and are generally normalized to have unit average power.An example of the typical 3D signal constellations is illustrated in Figure 1.
Thus, a baseband signal of the 3D OFDM in the frequency domain can be represented as a 3 ×  matrix given as follows: Here,  is the number of subcarriers.
To modulate the OFDM symbol in (1) generating time domain signals, a 2D IDFT is exploited.For the practical implementation, a 2D inverse fast Fourier transform (IFFT) algorithm is used to alleviate the computational complexity [16].Then, the modulated 3D OFDM symbol is represented as for 0 ≤  1 ≤  1 − 1 and 0 ≤  2 ≤  2 − 1, where  1 and  2 are the indices for columns (representing subcarriers of the OFDM system) and rows (representing dimension of the signal space) for the 2D matrix, respectively.In practice, the modulation is a process in which one-dimensional IDFT (or IFFT) with respect to each row vector of the baseband 3D OFDM signal is carried out, and then the same computation is applied to each column vector.Since the number of rows is equivalent to the dimension of the signal constellation, it can be fixed to 3 with no loss of generality.PAPR of the transmitted signals in a 3D OFDM system can be defined as where {⋅} is expectation value.  are the modulated 3D OFDM signals in the time domain.In general, a complementary cumulative distribution function (CCDF) defined as is widely used as a typical measure of PAPR.It is the probability that PAPR of the transmitted signals   exceeds a specific threshold PAPR 0 .Due to the 2D IDFT modulation, there may be more numbers of adding up the amplitude of sinusoidal signals.It possibly results in increased PAPR of the 3D OFDM as compared with that of the conventional one.It is, therefore, an appropriate PAPR reduction algorithm for the 3D OFDM system is highly required.

The 3D OFDM System with the PTS Technique.
A simplified block diagram of the transmitter part of the 3D OFDM system with PTS scheme is illustrated in Figure 2, where S/P is serial-to-parallel converter.Here, the input binary sequence is at first converted into a 3 ×  matrix in a 2D form in terms of 3D mapping constellations.The mapped 2D matrix is partitioned into where S  denote 2D subblock matrix having the same size.
In order to convert the modulated baseband signal S from the frequency domain into the time domain, 2D IDFT is applied to each 2D subblock matrix S  .The 2D IFFT (IFFT2) is commonly employed to reduce complexity.Thus, the transmitted signal s through subblock superposition in the time domain can be given as International Journal of Distributed Sensor Networks y-axis x-axis z-axis After the 2D IFFT modulation, the 3D OFDM signals are synthesized as a linear combination of the subblocks weighted by a set of phase rotation factors.Therefore, the transmitted 3D OFDM signal can be expressed as where b  = exp(  ) are phase rotation factors.To make PAPR of the signals in (7) as low as possible, a proper set of phase rotation factors should be used.To lessen computational complexity in the optimization block, the set of phase rotation factors should be limited to a finite set.A typical set of phase rotation factors is where  is the number of allowable phases.Such an optimal set making use of a search process can guarantee that the transmitted 3D OFDM signal has the lowest PAPR value.
Here,    phase rotation factor sequences have to be searched to find the optimum combination.The number of computations for searching an optimal set of phase rotation factors is increased exponentially with the number of 2D subblocks   .

The Conventional SPS.
In the PTS technique, performance of PAPR reduction depends largely on the subblock partitions.In general, there are three major partition schemes which are interleaved, adjacent, and pseudo-random subblock partitions.To apply the conventional SPS to a 3D OFDM symbol consisting of  subcarriers, we take a data packet containing three components into account.To give an easy explanation about the concept, a 3D OFDM signal with 32 subcarriers is demonstrated in Figure 3 as an example.The solid circle and the solid square denote the signal components on each axis and the data packet representing modulated 3D signals, respectively.With the conventional methods, the 32 subcarriers shown in Figure 3 are partitioned into the three different ways as illustrated in Figure 4. Here, the number of subblocks is set to   = 4.The empty square is a zero-padded subchannel.

The Proposed Diagonal Rule Method.
To reduce PAPR of the 3D OFDM system efficiently, we proposed a new partition method based on DR as shown in Figure 5, where an empty circle represents a zero-padded subchannel.
It is known that the pseudo-random subblock partition provides the best PAPR reduction performance from the three SPSs mentioned previously.In the proposed method, Figure 7: The CCDFs of PAPR of the 3D OFDM system with the DR-PTS.about 2.7 dB at Pr[PAPR > PAPR 0 ] = 1.0 × 10 −4 .Meanwhile the method can reduce PAPR of the conventional 2D OFDM system around 3.0 dB.Among three partition schemes for the PTS technique, the pseudo-random partition method always guarantees the least PAPR of the transmitted signals.It can also be observed that the PTS technique with the interleaved algorithm cannot reduce PAPR of the system as much as the adjacent algorithm.Such a performance trend is common both in the 3D OFDM system and in the corresponding 2D one.
PAPRs of the 3D OFDM system with the proposed DR-PTS and the conventional PTS technique are compared in Figure 7.The proposed DR-based partition algorithm further reduces PAPR of the system.Especially, the DR-based interleaved SPS can reduce PAPR of the 3D OFDM system around 3.7 dB at Pr[PAPR > PAPR 0 ] = 1.0 × 10 −4 .That is, in the case of the interleaved partition, performance gain of the proposed method over the conventional one is about 1.0 dB.With the DR-based adjacent SPS, PAPR of the 3D OFDM can be reduced around 4.0 dB.

Conclusions
To facilitate new emerging applications and services in the 3D wireless networks, a flexible data transmission scheme for the physical layer is to be developed.As a possible candidate, the OFDM system with 3D signal constellations is considered in this paper.To control the transmitted signals having very high peak amplitude, a PTS technique based on diagonal subblock partition is proposed and its performance is analyzed.The key feature of the proposed algorithm is to assign the components of 3D signals into different subblocks diagonally.It makes randomness of the signals in the disjoint subblocks increased forcibly while the computational complexity remains almost the same as the conventional algorithm.Computer simulation verifies that the proposed DR-based PTS scheme improves PAPR of the 3D OFDM system significantly.When the DR-based interleaved partition is exploited, performance gain of the proposed algorithm over the conventional one is around 1.0 dB at Pr[PAPR > PAPR 0 ] = 1.0 × 10 −4 .PAPR reduction capabilities of both DR-based adjacent partition and interleaved partition are quite close to that of the pseudo-random method which is known to have the best PAPR reduction performance.It is, therefore, considered that the proposed algorithm helps the 3D OFDM system be a useful candidate for a practical transmission scheme in future wireless sensor networks.

Figure 2 :
Figure 2: A simplified block diagram of a 3D OFDM system with the PTS technique.