Performance of PdRu/C Anode Catalyst for Anion-Exchange Membrane Direct Ethanol Fuel Cell

, and

© 2013 ECS - The Electrochemical Society
, , Citation Liang Ma et al 2013 ECS Trans. 58 1321 DOI 10.1149/05801.1321ecst

1938-5862/58/1/1321

Abstract

Carbon supported PdRu catalysts with various Pd:Ru atomic ratios were studied by using X-ray diffraction (XRD), transmission electron microscopy (TEM), electrochemical half-cell tests, and the anion-exchange membrane direct ethanol fuel cell (AEM-DEFC) tests. Lower onset potential and peak potential and much higher steady state current for ethanol oxidation in alkaline media were observed on the bimetallic catalysts (PdxRuy/C) than on the Pd/C, while the activity for ethanol oxidation on the pure Ru/C was not noticeable. By using Pd/C anode catalysts and MnO2 cathode catalysts, AEM-DEFCs free from the expensive Pt catalyst were assembled. The AEM DEFC using the bimetallic Pd3Ru/C anode catalyst showed a peak power density as high as 176 mW cm-2 at 80 °C, about 1.8 times higher than that using the single metal Pd/C catalyst.

Export citation and abstract BibTeX RIS

10.1149/05801.1321ecst