The effect of scalar hair on the charged black hole with the images from accretions disk

In this paper, we investigate the optical properties of a charged black hole with scalar hair (CSH) within the context of four-dimensional Einstein-Maxwell-Dilaton gravity. To achieve this, we consider three distinct toy models of thin accretion disks. The presence of dilaton coupling allows us to express both the solutions of CSH and the Reissner-Nordstr\"om (RN) black hole in terms of their mass ($M$) and charge ($Q$). Our findings reveal differences in the effective potentials $V_{eff}$, photon sphere radii $r_{ph}$, and innermost stable circular orbit $r_{isco}$ between the CSH and RN black hole cases, which become increasingly pronounced as the charge parameter $Q$ increases. However, no noticeable distinctions are observed concerning the critical impact parameter $b_{ph}$. When the ratio of the photon ring band and the lensed ring band exceeds 0.1, it may suggest the presence of a charged black hole with scalar hair. Furthermore, our results underscore the significant influence of the charge parameter $Q$ on the brightness distributions of the direct, lensed ring, and photon ring for three standard emission functions. These findings emphasize the potential for distinguishing between CSH and RN black holes through an analysis of direct intensity and peak brightness in specific accretion disk models.


Introduction
With the development of technology in recent years, more and more observations confirm the prediction of General Relativity (GR), which can result GR is a successful theory to describe the geometric properties of spacetime.Nonetheless, GR can not account a certain phenomena, such as the accelerated expansion of the universe [1,2], we need to acknowledge that our present a e-mail:guowd@lzu.edu.cn,corresponding author comprehension of gravity may remain incomplete.Therefore, the generally thought is that we can attempt to modify the GR, and give an explanation of this phenomena [3].
Moreover, the no-hair theorem, one of the main characteristics in GR, states that the stationary black hole can be only described by mass (M ), electric charge (Q) and angular momentum (a).For the modified gravity theory, the inclusion of modified terms introduce supplementary degrees of freedom and offer explanations for phenomena that GR cannot adequately address.Indeed, significant efforts have been made to modify GR by incorporating additional matter fields into the theories, which admits that the black holes need to be described by the other hair.Therefore, the hairy black holes have been widely constructed and analyzed, including the radially dependent scalar field [4][5][6][7][8][9][10][11][12][13][14][15] and time-dependent scalar field [16][17][18][19][20][21].
Recently, Bah and Heidmann introduced a modified gravity theory capable of describing a five-dimensional topological star/black hole model [22,23].This theory is founded on a five-dimensional Einstein-Maxwell framework.Within this model, the spacetime remains continuous and smooth in microstate geometries, while exhibiting similarity to a classical black hole in macrostate geometries.For more details, please refer to Refs.[24][25][26].Utilizing the Kaluza-Klein reduction, the five-dimensional Einstein-Maxwell theory can be reduced into an effective four-dimensional Einstein-Maxwell-Dilaton theory, which can obtain a static spherically symmetric charged black hole with scalar hair (CSH).In Ref. [27], the authors extensively investigated the shadow of this charged black hole with scalar hair from the perspectives of four different types of observers.Guo et al. also examined the quasinormal modes (QNMs) of this fourdimensional charged black hole with scalar hair, and their findings indicate that the discrepancies in the frequencies of the fundamental QNMs between the CSH and the Reissner-Nordström (RN) black holes are notably small for the angular number l = 2 [28].
On the other hand, the Event Horizon Telescope (EHT) has ushered in a novel observational perspective on the vicinity of black holes, providing us with images of the supermassive black holes in M87* [29][30][31][32][33][34], and in SgrA* [35][36][37][38][39][40].The black hole shadows and the observational data provided by the EHT can encode valuable spacetime information, which also can be applied in the ongoing exploration of black hole physics.These applications include parameter estimations for black holes [41][42][43][44], constraints on the size of extra dimensions [45][46][47], as well as investigations into GR and alternative theories of gravity [48][49][50][51][52][53][54][55][56][57][58].The success of these images and the potential future experimental opportunities in imaging have the capacity to usher in transformative research in gravitational phenomenology, which can serve as catalysts for our exploration of physics within the context of strong gravitational fields.Equally thrilling is the potential to observe ultra-compact objects, such as boson stars [59], soft hair around the horizon [60], gravastars [61], and fuzzballs [62].Investigating their gravitational signatures and observational distinctions promises to pave the way for novel gravity tests through direct observations.Besides, the black hole images released by the EHT capture the optical characteristics of black holes, stemming from the bending of photons due to gravitational lensing.In particular, the luminous region surrounding the dark area in these images is emitted by the accretion material enveloping real astrophysical black holes.The distribution of this accretion matter significantly impacts the observable shape of the black hole, due to the variations in the distribution of such matter.Although replicating a realistic accretion disk in theoretical research remains a challenging task, the first image of a black hole with a thin accretion disk was analytically computed in [63].This analysis revealed the presence of primary and secondary images that appear outside the black hole shadow.Subsequently, in [64], it was pointed out that it is relatively straightforward to distinguish a Schwarzschild black hole from a static wormhole based on the characteristics of their shadow images.In Ref. [65], the authors focused the investigations into Schwarzschild black hole with both thin and thick accretion disks, the result shows that the lensed ring, along with the photon ring, contributes additional observable flux to the image.Another type of accretion, spherical accretion, has been employed to analyze the images of Schwarzschild black hole in Refs.[66,67].These studies have revealed that the black hole shad-ows remain a robust feature, and its size and shape are primarily influenced by the spacetime geometry rather than the specific details of the accretion.Presently, research on photon rings and the observational aspects of black holes have garnered substantial attention, unveiling images of static black holes surrounded by various accretion scenarios that extend beyond GR [68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86].
Return back to the four-dimensional Einstein-Maxwell-Dilaton model, the inclusion of dilaton coupling leads to a modification in the expression of the solution for charged black hole, without introducing any scalar charges.This observation suggests that the black hole solutions for both the CSH and RN cases can be described using the same parameters, namely, mass (M ) and electric charge (Q).Nevertheless, the distinctions between the two solutions become evident in the appearance of the images of black holes.This revelation serves as an inspiration for the potential to differentiate between CSH and RN black holes based on their respective images.The principal aim of this study is to elucidate the influence of scalar hair on static black hole within the CSH scenario, and to discern the disparities between CSH and RN black holes by conducting an analysis of their optical characteristics when surrounded by three kinds of thin accretion disks.
The paper is structured as follows: In Section 2, we provide an overview of charged black hole with scalar hair.In Section 3, we delve into the calculation of photon trajectories of the CSH black hole.This analysis is carried out using Lagrangian formalism and a ray-tracing methodology.In Section 4, we investigate the total observed intensities and explore the possible sources contributing to it for three standard disk accretion functions.Subsequently, we compare the optical appearances of the CSH black hole to that of the RN black hole.Finally, we present our concluding remarks and summarize the key findings in Section 5.

The review of charged black hole with scalar hair
First of all, we will provide a concise overview of the charged black hole with scalar hair.We shall consider a five-dimensional Einstein-Maxwell theory, wherein the complete action can be expressed in [22] as where κ 5 can be considered as the five-dimensional gravitational constant and F M N describes electric threeform field strengths.Here, we ignored the magnetic term.For simplify, the capital Latin letters M, N... denote the five-dimensional coordinates, and the Greek letters µ, ν... denote the four-dimensional coordinates.The corresponding spherical symmetric metric for the five-dimensional Einstein-Maxwell theory can be expressed as [22,25] where and the five-dimensional vector field strength can be expressed as F = Q r 2 dr ∧ dt ∧ dy.Besides, the fivedimensional spacetime can be considered as a S 1 fibration over a four-dimensional Minkowski, R 4 ×S 1 , where the extra dimension is denoted by "y" with the radius R y .
From the expression of the metric, we can see that the solutions exhibit a curvature singularity at r = 0, along with two coordinate singularities located at r = r B and r = r S .Ibrahima Bah et al. found a smooth bubble locates at r = r B [22,23].They also discussed the cases r S ≥ r B and r S < r B , which correspond to a black string and a topological star, respectively.
By the Kaluza-Klein reduction, which can be handled as integrating the extra dimension y, the five dimensional Einstein-Maxwell theory can be reduced into a four-dimensional Einstein-Maxwell-Dilaton theory as where κ 2 4 = e 2 κ 2 5 and e 2 = 1 2πRy .The corresponding scalar field can be defined as Φ = − 1 4 ln(f B ), the fourdimensional field strength of vector field can be solved as F = Q r 2 dr ∧ dt, and the four-dimensional metric can be rewritten as From the four-dimensional perspective, the conserved quantities, the ADM mass M and the electric charge Q can be given as For convenience, we can express two pairs (r S , r B ) for given mass and charge parameters (M, Q): While, the corresponding event horizons of the Reissner-Norström black hole are given as Here, we should note that the RN black hole is not the solution of Einstein-Maxwell-Dilaton theory as Eq. ( 4).
To facilitate our calculations, we can set the electric charge range of the RN black hole as Q ∈ [0, M ].On the other hand, the corresponding electric charge range of the CSH black hole is specified as Besides, the authors studied shadow of the CSH black bole, revealing that the radial component of geodesic equation for the photon is influenced by f S (r) in Ref. [27].Consequently, we will exclusively focus on the scenario denoted by (7) with the electric charge Q ∈ [0, 2/ √ 3M ], and this range remains greater than that of the RN black hole's electric charge.In fact, when we observed a charged black hole, we can not make sure which gravitational theory solution the charged black hole is.So, we need to distinguish between observations of black holes with the same charge, which means that the same charge will give different observed effects on the different charged black hole modes.Hence, in the next section, we will discern the impact of scalar hair on the image of the static black hole by investigating the observable properties of CSH and RN black holes when subjected to various accretion processes.

Trajectories of photons around charged black hole with scalar hair
In this section, we will explore the behavior of light rays near the CSH black hole, specifically focusing on null geodesics.From a geometric perspective, the paths of photons correspond to null geodesics of the spacetime.Consequently, we must address the null geodesic equations.However, it's important to note that the geodesic equations governing the motion of photons involve four coupled second-order differential equations, making direct solutions challenging.An alternative approach involves encapsulating the geodesic equation of photons within the framework of the Euler-Lagrange equation: where λ is the affine parameter and ẋµ = dx µ /dλ represents the four-velocity of the photon.The photons in the spacetime take the Lagrangian Because of the spherical symmetry of the spacetime, we can focus on the photons moving on the equatorial plane, i.e., θ = π/2 and θ = 0.For this static black hole, there are two Killing vectors ∂ t and ∂ ψ , which lead to the conserved total energy E and angular momentum L z , By redefining the affine parameter λ as λ/L z and the impact parameter b ≡ L z /E, and recalling L = 0 for photons, we can reduce Eq. ( 10) into three first-order differential equations, which are the time, azimuthal and radial components of the four-velocity where the sign " + " and " − " of azimuthal component ψ denote that the light ray traveling in the counterclockwise and clockwise along azimuthal direction.The effective potential V eff (r) is illustrated in Fig. 1.This plot reveals that the effective potential vanishes initially at the event horizon.Subsequently, as r increases, it attains a maximum value before gradually decreasing monotonically.Besides, as the charge parameter Q increases, the distinction between the effective potentials for the CSH and RN black holes becomes increasingly evident, which seems to indicate that motion of photons becomes distinguishable in the two types of black holes for large charge parameter Q.
Q=0.2M Q=0.99M Prior to delve into the comprehensive photon trajectories, it is crucial to conduct an analysis of the circular orbit or photon sphere.This orbit is characterized by the conditions ṙ = 0 and r = 0, as indicated by Eq. (15).
Using translating the conditions of the photon sphere, we can derive where the prime notation signifies differentiation with respect to r.Based on the above equations, the radius of photon sphere r ph and the critical impact parameter b ph can be obtained for different values of charge parameter Q, which are shown in Fig. 2. From Fig. 2, we can see that both the radius of photon sphere r ph and the critical impact parameter b ph decrease with the charge parameter Q, a trend observed in both CSH and RN black hole cases.It's worth highlighting that the rate of decline for the radius of photon sphere r ph with respect to the charge parameter Q is less pronounced in the context of the CSH black hole, as opposed to the RN black hole.While, for the critical impact parameter b ph , the CSH and RN black holes do not exhibit a significant difference, in the electric charge range Besides, it's essential to recognize that there are three distinct scenarios for different values of the impact parameter b: i) b > b ph , the photon will scatter into infinity after traversing the turning point; ii) b = b ph , the photon does not escape to infinity but instead travels around the black hole along a circular orbit with a radius of r ph , effectively forming the boundary of the black hole's shadow; iii) b < b ph , the photon inexorably approaches to the event horizon, getting closer and closer until it ultimately falls into the black hole.Furthermore, by combining Eq. ( 14) and Eq. ( 15), we can derive an equation of motion that accurately portrays the trajectory of the light ray The total change in the azimuthal angle ψ depends on the impact parameter b as described in Eq. (17).To distinguish between the photon ring and the lensing ring near the black hole, Wald et al. introduced the concept of the orbit number, denoted as n = ψ/(2π), which can quantify the total count of loops executed by the photon around the black hole [65].They categorized photon orbit trajectories into three primary cases based on the orbit number n.More specifically, the first category is characterized as direct emission with n < 3/4, denoting that the light ray intersects the accretion disk solely once.The second category, encompassing 3/4 < n < 5/4, corresponds to the lensed ring emission, where the light ray intersects the accretion disk twice.The third classification, referred to as photon ring emission, applies to light rays with n > 5/4, which cross the accretion disk a minimum of three times.To gain a more comprehensive understanding of these three trajectory classes, schematic diagrams can be referred to in [78,87,88].Figure 3 presents the trajectories of photons with different impact parameters b/M in the polar coordinates (r, ψ).In this depiction, we consider an observer locates at a considerable distance to the right of the plot.The black curves represent direct emission, the gold curves correspond to lensed ring emission, the red curves indicate photon ring emission, and the green circular ring describes the photon sphere.From Fig. 3, it's evident that the charge parameter Q has a notable impact on the size and distribution of the direct, lensed, and photon ring bands.For example, as the charge parameter Q increases, the photon ring band tends to become larger.
Besides, we provide the orbit photon sphere number n as a function of the impact parameter b for charge parameter (Q = 0.6M, 0.99M ) in the cases of the CSH and RN black holes.Figure 4 illustrates that as the charge parameter Q increases, it becomes feasible to distinguish between the two black hole scenarios based on the orbit number n.Additionally, we show the range of the impact parameter b corresponding to (n > 3/4) and (n > 5/4), which are the shaded areas in Fig 5(a) and 5(b).They also illustrate that the differentiation between the two black hole cases becomes apparent as the charge parameter Q approaches M .To characterize the effect of charge parameter Q on the orbit number n, we define a parameter Γ to describe the ratio between the photon ring and the lensed ring bands for various charge parameter Q as which can considered as a simply theoretical tool to differentiate the influence of charge parameter Q on the charged black holes, and the notable insights can be derived from Fig. 5(c).It is apparent that the ratios Γ for the CSH and the RN black hole cases experience an increase as the charge parameter Q grows.For larger values of Q, the photon ring band becomes more prominent, consistent with the trends in Fig. 3. Additionally, it is noteworthy to highlight that the increase of Γ for both the CSH and RN black hole scenarios is practically identical within the range of the charge parameter Q ∈ [0, 0.8M ].However, when the charge parameter extends to Q ∈ [0.8M, M ], the augmentation of Γ becomes more pronounced in the RN black hole case as compared to the growth pattern observed in the CSH black hole scenario.In simpler terms, higher values of the charge parameter Q result to a clearer distinction between the two black hole scenarios based on the Γ ratio.

Rings and images of hairy black hole illuminated by thin disk accretions
In the previous section, we investigated the impact of the charge parameter Q on photon trajectories and categorized the photons into three distinct classes based on their orbit numbers n.In the following section, we will focus on the exploration of imagery involving the charged black hole with scalar hair.The investigation centers around scenarios where the black hole is illuminated by optically and geometrically thin accretion disks.These disks are situated at rest on the equatorial plane surrounding the black hole and are observed face-on.In this context, as light rays traverse through the accretion disk, they interact with it, extracting energy in the process.It's noteworthy that various types of light rays make distinct contributions to the observed light intensity.
We can assert that the thin accretion disk emits intensity I e (r) with the frequency ν e .According to Liouville's theorem, the specific intensity I o (r) received by the observer with an emission frequency ν o can be expressed as [65] where the factor g s = ν o /ν e = √ g tt represents the red shift factor.The total observed intensity, denoted as I obs (r), can be obtained by integrating over all observed frequencies of I o (r, ν o ), which can be expressed as: = (g 2 tt ) I e (r, ν e )dν e = (g 2 tt )I em (r), (21) where I em (r) = I e (r, ν e )dν e .We should note that everytime the photon passes through the disk, it will extract energy from the accretion disk and contribute brightness to the observer.As we discussed in the previous subsection, a light ray can pick up brightness from the accretion disk once, twice, or even more times which is contingent upon its impact parameter b.Hence, the total observed intensity is the cumulative sum of intensities resulting from each intersection [65], yielding: where r m (b) serves to characterize the transformation from the light ray's impact parameter b to the radial coordinate of the m-th intersection with the accretion disk, which is also named as transfer function.Moreover, the slope of the transfer function dr/db can describe the demagnification factor at impact parameter b.
Figure 6 shows the first three transfer functions r m (b) with different charge parameter Q for the two black hole cases.The first transfer function (the black curves) labels that the photon only interacts with the disk one time.Its slope remains nearly a constant, which approximats to 1, indicating that the direct image profile primarily mirrors the red shifted source profile.For the second transfer function, colored with gold curves, is associated with the lensed ring emissions.Due to its steep slope, an observer will perceive a significantly demagnified image of the accretion disk.Finally, as for the third transfer function, represented by the red curves, it corresponds to the photon ring emission.It is apparent that this image is subject to extreme demagnification.Consequently, it makes a minimal contribution to the total flux and is scarcely visible.Besides, the charge parameter Q has small influence on the slope of the transfer function r m (b).However, owing to the same impact of the charge parameter Q has on the critical impact factor b ph for the two black hole scenarios with Q ∈ [0, M ], the difference in the transfer function r m (b) between the two black hole cases is not substantial.
In order to distinguish the difference between the two black hole cases which can base on the specific intensity distribution around the black hole on the equatorial plane, we turn our attention to the optically and geometrically thin disk models with different emission functions.It's important to note that these models are particularly suitable for evaluating accretion processes where flow velocities are sub-Eddington and opacity is high, while they may not account for scenarios involving high accretion velocities and mass [89].For example, around supermassive black holes, the accretion disk might effectively transit into an apparently thin but structurally thick configuration [90].In this analysis, the primary source of observed specific light intensity is a thin disk, and its luminosity exclusively relies on the radial coordinate, denoted as r.As a result, we will consider the following three toy models [91,92], which are employed to approximate real-world scenarios involving thin matter distributions.Model a: The emission function of the accretion disk starts from the innermost stable circular orbit (ISCO).This function has a square decay behavior, which can be written as where I 0 is the maximum intensity and the r isco is the ISCO of the black hole.

Model b:
The emission function has a cubic decay behavior which starts from the photon sphere r ph Model c: The emission function is moderate decay, which starts from the event horizon r h Figure 7(a) shows the sketches of the emission functions of the accretion disk for the three models.Figure 7(b) depicts the behavior of the r isco for CSH and RN black holes, it becomes evident that as the charge parameter Q increases, the difference in r isco between the CSH and RN black hole cases becomes more pronounced.Besides, the innermost stable circular orbit of RN black hole case is consistently closer to the event horizon than in the CSH black hole case.23).In Fig. 8(a), it is evident that, for this model, there are three distinct peaks corresponding to the direct (the black line), lensed (the orange line), and photon ring (the red line) intensities, and these peaks are independent of each other.In other words, the three intensities do not exhibit any superposition effects on the overall observed intensities, a fact that can be seen from in Fig. 8(b) with the red line.For the charge parameter Q = 0.99M case, the direct intensity has a behavior with a sharp change occurring at approximately b ∼ 5.397M due to the gravitational lensing effect.The lensed ring intensity is confined to a narrow range, with b ∈ (4.499M, 5.223M ).In contrast, the photon ring intensity manifests as extremely narrow spikes at approximately b ∼ 4.153M , contributing negligibly to the total observed intensity.From Fig. 8(b), we can see that with a large charge parameter Q = 0.99M case, both the difference in the distribution of direct intensity and the brightness between the CSH and RN black hole cases become evident.Figure 8(c) shows the two-dimensional disk of observed intensities for CSH and RN black hole with Q = 0.99M .Furthermore, Fig. 9(a) illustrates the impact parameter b associated with the three intensity peaks.The results indicate that discerning between the CSH and RN black hole cases based on the peaks of lensed (the orange lines) and photon ring (the red lines) intensities is challenging, whereas the peaks of direct intensity (the black lines) provides more robust difference.Besides, Figs.8(a) and 8(b) also show that all three of the intensity peaks exhibit nearly identical brightness.
So, the impact of the charge parameter Q on the three brightness should be the same, which are shown in Fig. 9(b).The findings reveal that the charge parameter Q has a suppressive effect on brightness, with different degrees of suppression observed in the CSH and RN black holes.Based on these distinctions, it is possible to distinguish the CSH black hole and the RN black hole by examining the distribution and peak brightness of direct intensity.10(c).Figure 11 also illustrates the positions of two distinct peaks with the impact parameter b and the corresponding peak brightness, which are the direct intensity peaks (the black lines) and the superimposed peaks (the orange lines).The results indicate that the difference between the two peak positions corresponding to the CSH and RN black holes is not sufficiently clear.Compared to the brightness contributed solely by the direct intensity, the superimposed brightness facilitates a more straightforward difference between CSH and RN black holes.Figure 12 presents the observed intensities and black hole images for the third emission function case with Q = 0.99M .In Fig. 12(a), it is noticeable that compared to the previous two emission function cases, the direct intensity do not exhibit abrupt terminations at any impact parameter b, and begins from b ∼ 2M .The photon ring intensity remains in the middle with b ∼ 4.145M , while the lensed intensity wraps around b ∈ (3.812M, 5.312M ).This implies that all the three intensities have a cumulative effect on the total observed intensities, as shown in Fig. 12(b).The results highlight that both the photon ring and lensed ring intensities make significant contribution to the peak brightness, which means the combined effects result two peaks in the total observed intensities.The twodimensional representations of the total observed intensities for both black holes are presented in Figs.12(c).Additionally, Fig. 13 shows the positions of the two peaks along with the impact parameter b and peak brightness, which are contributed by the photon intensity (the black lines) and the lensed intensity (the orange lines).The result shows that, comparing the influence of the charge parameter Q on the position of peaks, the effect of Q on brightness is more effective for distinguishing between CSH and RN black holes.

Conclusion and discussion
In this paper, we have undertaken an exploration of the optical characteristics of CSH black hole within the context of a four-dimensional Einstein-Maxwell-Dilaton theory, which can be derived from a five-dimensional Einstein-Maxwell theory.In this scenario, the associated electric charge range for CSH black hole is Q ∈ [0, 2/ √ 3M ].Our analysis primarily focused on examining the impact of the charge parameter Q on photon trajectories and the black hole images when illuminated by different optical and geometrically thin accretion disks.Initially, we delved into the trajectories of photons around the CSH black hole, particularly in the equatorial plane.We obtained the time, azimuthal, and radial components of the four-velocity.Notably, as the charge parameter Q increased, the discrepancy between the effective potentials V ef f , radius of the photon sphere r ph and the innermost stable circular orbit r isco for CSH and RN black hole cases became increasingly pronounced.While, in the range of Q ∈ [0, M ], it is not possible to discern any difference between the CSH and RN black hole cases in terms of the critical impact parameter b ph .
We also analyzed the effect of the charge parameter Q on the orbit number n.Our findings reveal that as the charge parameter Q approaches to M , the difference between the two black hole cases becomes more pronounced based on the orbit number n.To describe the relationship between the photon ring and the lensed ring bands, we introduced a ratio, Γ .It is evident that the increment of Γ with Q is less significant for the CSH black hole than that of the RN black hole.However, if Γ exceeds 0.1, it may suggest the presence of a charged black hole with scalar hair.
Then, we investigated the images of CSH and RN black hole cases, illuminated by three accretion disk toy models which are optical and geometrically thin.Our detailed analysis was focused on assessing the impact of the charge parameter Q on the brightness of direct, lensed ring, and photon ring intensities, as well as their contributions to the total observed intensities.The findings indicate that, for Model a, the difference between CSH and RN black holes becomes feasible through an analysis of the distribution and the peak brightness of direct intensity.Conversely, in the context of Model b, the increased brightness resulting from variations in the parameter Q significantly enhances the difference between CSH and RN black holes.Within the framework of Model c, it is demonstrated that the influence of Q on brightness offers a more effective method for distinguishing between CSH and RN black holes.

Fig. 1
Fig.1The behaviors of effective potentials V eff for the CSH black hole (the solid lines) and RN black hole (the dashed lines).

Fig. 2
Fig.2The radius of photon sphere r ph and the critical impact parameter b ph for the CSH black hole (the red lines) and RN black hole (the blue lines).

Fig. 4 Fig. 5
Fig.4The orbit numbers n as the functions of impact parameter b with different charge parameter Q for CSH (the solid line) and RN (the dashed line) black hole cases.The black, gold, and red curves correspond to the direct (n < 3/4), lensed ring (3/4 < n < 5/4), and photon ring (n > 5/4) emissions respectively.

Fig. 6
Fig.6The first three transfer functions in CSH (the solid line) and RN (the dashed line) black holes for different charge parameter Q.They represent the radial coordinate of the first (black), second (gold), and third (red) intersections with the emission disk.

Fig. 7
Fig.7The emission function of the accretion disk for the three models with the charge parameter Q = 0.2M and the innermost stable circular orbit r isco for CSH (the red line) and RN (the blue line) black hole cases.

Figure 8
Figure8shows the observed intensities and black hole images for the first model with the emission function of the accretion disk, represented by Eq.(23).In Fig.8(a), it is evident that, for this model, there are three distinct peaks corresponding to the direct (the black line), lensed (the orange line), and photon ring (the red line) intensities, and these peaks are independent of each other.In other words, the three intensities do not exhibit any superposition effects on the overall observed intensities, a fact that can be seen from in Fig.8(b) with the red line.For the charge parameter Q = 0.99M case, the direct intensity has a behavior with a sharp change occurring at approximately b ∼ 5.397M due to the gravitational lensing effect.The lensed ring intensity is confined to a narrow range, with b ∈ (4.499M, 5.223M ).In contrast, the photon ring intensity manifests as extremely narrow spikes at approximately b ∼ 4.153M , contributing negligibly to the total observed intensity.From Fig.8(b), we can see that with a large charge parameter Q = 0.99M case, both the difference in the distribution of direct intensity and the brightness between the CSH and RN black hole cases become evident.Figure8(c)shows the two-dimensional disk of observed intensities for CSH and RN black hole with Q = 0.99M .Furthermore, Fig.9(a) illustrates the impact parameter b associated with the three intensity peaks.The results indicate that discerning between the CSH and RN black hole cases based on the peaks of lensed (the orange lines) and photon ring (the red lines) intensities is challenging, whereas the peaks of direct intensity (the black lines) provides more robust difference.Besides, Figs.8(a) and 8(b) also show that all three of the intensity peaks exhibit nearly identical brightness.

Fig. 8 Fig. 9
Fig. 8 Observational appearances of the thin disk with Model a for the CSH and RN black hole cases.(a): the observed intensities originated from the first (black), second (gold) and third (red) transfer function for CSH black hole case.(b): the total observed intensities I obs /I 0 of the CSH (the red line) and RN (the blue line) black hole cases.(c): the two-dimensional disk of observed intensities for CSH and RN black hole cases with Q = 0.99M .

Figure 10
Figure 10 displays the observed intensities and black hole images for Model b.From Fig. 10(a), it's apparent that in this model, the three intensities are not independent of each other.The direct intensity is superimposed by the lensed and photon ring intensities with b ∈ (3.833M, 5.323M ), and exhibit abrupt changes at approximately b ∼ 2.873M for Q = 0.99M .For the total observed intensities shown in Fig. 10(b), in the innermost part there is a peak which contributed only by the direct intensity.The combination of the three intensities creates a maximum peak.Consequently, there are two distinct peaks attributed to the direct intensity alone and a superimposed peak resulting from all three intensities together.The two-dimensional disks of the total observed intensities for the two black hole cases are shown in Fig.10(c).Figure11also illustrates the positions of two distinct peaks with the impact parameter b and the corresponding peak brightness, which are the direct intensity peaks (the black lines) and the superimposed peaks (the orange lines).The results indicate that the difference between the two peak positions corresponding to the CSH and RN black holes is not sufficiently clear.Compared to the brightness contributed solely by the direct intensity, the superimposed brightness facilitates a more straightforward difference between CSH and RN black holes.

Fig. 10 Fig. 11
Fig. 10 Observational appearances of the thin disk with Model b for the CSH and RN black hole cases.(a): the observed intensities originated from the first (black), second (gold) and third (red) transfer function for CSH black hole case.(b): the total observed intensities I obs /I 0 of the CSH (the red line) and RN (the blue line) black hole cases.(c): the two-dimensional disk of observed intensities for CSH and RN black hole cases with Q = 0.99M .

Fig. 12 Fig. 13
Fig. 12 Observational appearances of the thin disk with Model c for the CSH and RN black hole cases.(a): the observed intensities originated from the first (black), second (gold) and third (red) transfer function for CSH black hole case.(b): the total observed intensities I obs /I 0 of the CSH (the red line) and RN (the blue line) black hole cases.(c): the two-dimensional disk of observed intensities for CSH and RN black hole cases with Q = 0.99M .