Skip to main content

Advertisement

Log in

An ocean kinetic energy converter for low-power applications using piezoelectric disk elements

  • Regular Article
  • Published:
The European Physical Journal Special Topics Aims and scope Submit manuscript

Abstract

The main problem facing long-term electronic system deployments in the sea, is to find a feasible way to supply them with the power they require. Harvesting mechanical energy from the ocean wave oscillations and converting it into electrical energy, provides an alternative method for creating self-contained power sources. However, the very low and varying frequency of ocean waves, which generally varies from 0.1 Hz to 2 Hz, presents a hurdle which has to be overcome if this mechanical energy is to be harvested. In this paper, a new sea wave kinetic energy converter is described using low-cost disk piezoelectric elements, which has no dependence on their excitement frequency, to feed low-consumption maritime-deployed electronic devices. The operating principles of the piezoelectric device technique are presented, including analytical formulations describing the transfer of energy. Finally, a prototypical design, which generates electrical energy from the motion of a buoy, is introduced. The paper concludes with the the behavior study of the piezoelectric prototype device as a power generator.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. R. Murray, J. Rastegar, Novel two-stage piezoelectric-based ocean wave energy harvesters for moored or unmoored buoys, Proc. SPIE 7288, Active and Passive Smart Structures and Integrated Systems 2009, 72880E (April 06, 2009), doi: 10.1117/12.815852

  2. A.G. Thiam, A.D. Pierce, Feasiblity of using Piezoelectricity in the Conversion of Ocean Wave Energy, 1st Annual MREC Technology Conference (New England Marine Renewable Energy Consortium) Fall River, Massachusetts October 15, 2009

  3. M. Krawczewicz, E. Greene, Micro Ocean Renewable Energy Harvesting ocean kinetic energy to power sonobuoys, navigational aids, weather buoys, emergency rescue devices, domain awareness sensors and fishery devices

  4. N. Okada, H. Fujimoto, S. Yabe, M. Murai, Experiments on floating wave-power generation using piezoelectric elements and pendulums in the water tank, OCEANS, 2012 – Yeosu, p. 1, 21 May 2012, doi: 10.1109/OCEANS-Yeosu.2012.6263603

  5. H. Fujimoto, M. Murai, O. Fujita, Experiment in Small Water Tank about Wave Power Generation by Using Piezoelectric Element, Conference Proceedings, The Japan Society of Naval Architects and Ocean Engineers Vol. 9E, p. 191, November 2009

  6. H. Fujimoto, M. Murai, A basic study on floating wave-power generation using piezoelecric device, Ocean Engineering Symposium in Japanese, Vol. 22, OES22-103, August 2011

  7. E. Molino-Minero-Re, M. Carbonell-Ventura, C. Fisac-Fuentes, A. Manuel-Lazaro, D.M. Toma, Piezoelectric energy harvesting from induced vortex in water flow, Instrumentation and Measurement Technology Conference (I2MTC), 2012, IEEE International, p. 624, 13–16 May, 2012, doi: 10.1109/I2MTC.2012.6229686

  8. A.S. Zurkinden, F. Campanile, L. Martinelli, Wave Energy Converter through Piezoelectric Polymers, Excerpt from the Proceedings of the COMSOL Users Conference, 2007, Grenoble

  9. G. Fischer, H.T. Rossby, A silicon core for an acoustic archival tag, SOC Conference (SOCC), 2011 IEEE International, p. 63, 26–28 Sep. 2011, doi: 10.1109/SOCC.2011.6085097

  10. IEEE Standard on Piezoelectricity—Std. 176, The Institute of Electrical and Electronics Engineering, New York, 1987

  11. X. Zhang, Y. Yin, G. Zhan, H. Ren, Real-time Simulation and Visualization of buoy in Irregular wave, International Conference on Information Technology and Software Engineering, 2012

  12. E. Jacquelin, S. Adhikari, M.I. Friswell, A piezoelectric device for impact energy harvesting, Smart Mater. Struct. 20

  13. S. Adhikari, M.I. Friswell, D.J. Inman, Piezoelectric energy harvesting from broadband random vibrations, Smart Mater. Struct., 18 (2009)

  14. M. Renaud, P. Fiorini, C. Van Hoof, Optimization of a piezoelectric unimorph for shock and impact energy harvesting, Smart Mater. Struct., 16 (2007)

  15. S. Moss, A. Barry, I. Powlesland, S. Galea, G.P. Carman, A low profile vibro-impacting energy harvester with symmetrical stops, Appl. Phys. Lett., 97 (2010)

  16. M. Renaud, P. Fiorini, R. van Schaijk, C. van Hoof, An impact based piezoelectric harvester adapted to low frequency environmental vibrations, Transducers 2009, Denver, CO, USA, June 21–25, 2009

Download references

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to C. Viñolo, D. Toma, A. Mànuel or J. del Rio.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Viñolo, C., Toma, D., Mànuel, A. et al. An ocean kinetic energy converter for low-power applications using piezoelectric disk elements. Eur. Phys. J. Spec. Top. 222, 1685–1698 (2013). https://doi.org/10.1140/epjst/e2013-01955-3

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1140/epjst/e2013-01955-3

Keywords

Navigation