Abstract
Two ferrofluid inks for jet-printing, containing magnetite NPs of slightly different average radius (sample A: 6 nm; sample B: 8 nm) were prepared by adding a dispersion of magnetite nanopowders in n-hexane to an insulating ink. Isothermal magnetization loops of inks were measured by means of a vibrating sample magnetometer in the temperature interval 5–300 K up to 70 kOe. The inks were then ejected at room temperature on standard paper by means of either a thermal ink jet head (TIJ; sample A) or a piezoelectric ink jet head (PIJ; sample B). Magnetic properties of prints on paper (FC/ZFC curves, isothermal magnetic loops and related hysteretic properties) were measured between 10 and 300 K using an alternating gradient force magnetometer up to 20 kOe. The inks display a different magnetic behavior with respect to both prints. In particular, the dispersed NPs are characterized by an effective radius (and ensuing magnetic interaction) larger than expected on the basis of the properties of the starting powders. Instead, the NP radii in both prints are closer to the starting values. The printed magnetic films show an almost perfect superparamagnetic (SP) response around room temperature; however, at temperatures lower than 100 K the SP scaling is not observed and both samples behave as interacting superparamagnetic (ISP) materials. The evolution from the SP to the ISP regime is marked by a steady increase in the hysteretic properties of both samples. Particular attention will be paid to the study of magnetic interactions occurring among NPs. The effect of the ejection process on the degree of aggregation of magnetite NPs will be here studied.
Similar content being viewed by others
References
Y. Wattanabe, K. Kuda, Appl. Phys. Lett. 87, 2235 (2005)
T.W. Kelley, C.D. Frisbie, J. Phys. Chem. B 105, 4538 (2001)
Z. Kovac, C.J. Sambucetti, Colloids and Surfaces in Reprographic Technology (American Chemical Society, Washington, 1982), pp. 543–552
M. Sangermano, L. Vescovo, N. Pepino, A. Chiolerio, P. Allia, P. Tiberto, M. Coïsson, L. Suber, G. Marchegiani, Macromol. Chem. Phys. B 211, 2530 (2010)
A. Chiolerio, G. Maccioni, P. Martino, M. Cotto, P. Pandolfi, P. Rivolo, S. Ferrero, L. Scaltrito, Microelectron. Eng. 88, 2481 (2011)
C.J. Sambucetti, IEEE Trans. Magn. MAG-16, 364 (1980)
S. Shylesh, V. Schünemann, W.R. Thiel, Angew. Chem. Int. Ed. 49, 3428 (2010)
R.Y. Hong, T.T. Pan, H.Z. Li, J. Magn. Magn. Mater. 343, 60 (2006)
T.K. Jain, J. Richey, M. Strand, D.L. Leslie-Pelecky, C.A. Flask, V. Labhasetwar, Biomater. 29, 4012 (2008)
R.D. Hergt, S. Dutz, J. Magn. Magn. Mater. 311, 187 (2007)
Q.A. Pankhurst, J. Connolly, S.K. Jones, J. Dobson, J Phys. D 36, R167 (2003)
G. Marchegiani, P. Imperatori, A. Mari, L. Pilloni, A. Chiolerio, P. Allia, P. Tiberto, L. Suber, Ultrason. Sonochem. 19, 877 (2012)
S. Sun, H. Zeng, S. Raoux, D.B. Robinson, S.X. Wang, P.M. Rice, G. Li, J. Am. Chem. Soc. 126, 273 (2004)
P. Panissod, M. Drillon, in Magnetism: Molecules to Materials IV, edited by J.S. Miller, M. Drillon (Wiley-VCH Verlag, Berlin, 2002), pp. 233–269
S. Mørup, M.F. Hansen, C. Frandsen, Beilstein J. Nanotechnol. 1, 182 (2010)
S. Bedanta, W. Kleeman, J. Phys. D 42, 013001 (2009)
P. Allia, P. Tiberto, M. Coïsson, A. Chiolerio, F. Celegato, F. Vinai, M. Sangermano, L. Suber, G. Marchegiani, J. Nanopart. Res. 13, 5615 (2010)
P. Guardia, B. Batlle-Brugal, A.G. Roca, O. Iglesias, M.P. Morales, C.J. Serna, A. Labarta, X. Batlle, J. Magn. Magn. Mater. 316, e756 (2007)
P. Allia, M. Coïsson, P. Tiberto, F. Vinai, M. Knobel, W.C. Nunes, M.A. Novak, Phys. Rev. B 64, 144420 (2006)
P. Allia, P. Tiberto, J. Nanopart. Res. 13, 7277 (2011)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tiberto, P., Barrera, G., Celegato, F. et al. Magnetic properties of jet-printer inks containing dispersed magnetite nanoparticles. Eur. Phys. J. B 86, 173 (2013). https://doi.org/10.1140/epjb/e2013-30983-8
Received:
Revised:
Published:
DOI: https://doi.org/10.1140/epjb/e2013-30983-8