Abstract
The influence of the reaction mixture feed rate in a tubular turbulent apparatus with a diffuser–confuser design and its geometric parameters on the fields of turbulent kinetic energy and its dissipation rate has been shown as a result of the physicochemical fluid dynamics modeling of the reaction mixture flow through an apparatus. The reaction mixture consists of toluene, butadiene and particles of the active sediment of TiCl4–Al(i-C4H9)3 catalytic system. It was shown that an increase in the values of the fields of turbulent kinetic energy and its dissipation rate leads to an increase in the degree of dispersion and specific surface area of the catalytically active sediment particles and to an increase of TiCl4–Al(i-C4H9)3 catalytic system activity in the process of obtaining low-molar-mass polybutadiene—a polymer component of sticky glue.
Similar content being viewed by others
REFERENCES
N. N. Chumachenko, V. A. Zakharov, S. A. Sergeev, and S. V. Cherepanova, “Effect of the synthesis conditions of titanium-magnesium catalysts on the composition, structure and performance in propylene polymerization,” Polyolefins J. 4 (1), 111–122 (2017).
V. Z. Mingaleev, “Effect of the particle size of the TiCl4–Ali-Bu3 catalyst on the contribution from mono- and bimetallic active sites to the polymerization of isoprene,” Kinet. Catal. 57 (1), 52–60 (2016).
N. V. Plotnikova, D. V. Styazhkin, K. S. Chirko, I. A. Ionova, G. I. Islamova, G. R. Mingaleeva, G. F. Sagitova, and V. Z. Mingaleev, “Disperse composition of titanium–magnesium catalyst particles and trans-1,4-polyisoprene granules in short-time polymerization,” Polym. Sci., Ser. B 60 (3), 283–289 (2018).
Active Sites of Polymerization. Multiplicity: Stereospecific and Kinetic Heterogeneity, Ed. by G. Zaikov, Y. B. Monakov, N. N. Sigaeva, and N. Urazbaev (ICRC Press, London, 2005).
R. Ya. Deberdeev, Al. Al. Berlin, G. S. Dyakonov, V. P. Zakharov, and Yu. B. Monakov, Fast Chemical Reactions in Turbulent Flows: Theory and Practice (Smithers Rapra Technology Ltd., Shawbury–Shrewsbury–Shropshire, UK, 2013).
K. A. Tereshchenko, A. S. Ziganshina, N. V. Ulitin, V. P. Zakharov, and E. M. Zakharova, “Relationships between the activities of the growth centers of macromolecules in the TiCl4–Al(i-C4H9)3 catalytic system and the particle size of its catalytically active residue,” Russ. J. Phys. Chem. A 91 (10), 1855–1860 (2017).
V. Z. Mingaleev, V. P. Zakharov, and Y. B. Monakov, “Changes of the titanium catalyst particles sizes at the initial period of butadiene polymerization,” Izv. Vyssh. Uchebn. Zaved., Khim. Khim. Tekhnol. 51 (9), 63–65 (2008) [in Russian].
V. Z. Mingaleev, V. P. Zakharov, and Yu. B. Monakov, “Polymerization of butadiene on a titanium catalyst in formation of a reaction mixture in turbulent flows,” Russ. J. Appl. Chem. 80 (7), 1130–1134 (2007).
ANSYS Fluent Theory Guide (ANSYS, Inc., Southpointe, 2011).
V. Z. Mingaleev, I. A. Ionova, Y. B. Monakov, V. P. Zakharov, A. A. Musin, S. F. Urmancheev, and A. A. Berlin, “Kinetic nonuniformity of a titanium catalyst in the polymerization of butadiene: Effect of intensifying stirring of the reaction mixture,” Polym. Sci., Ser. B. 50 (11–12), 351–355 (2008).
K. A. Tereshchenko, A. S. Ziganshina, N. V. Ulitin, and V. P. Zakharov, “Modeling of the physicochemical hydrodynamics of the synthesis of butadiene rubber on the TiCl4−Al(i-C4H9)3 catalytic system modified in turbulizing flows,” Russ. J. Phys. Chem. B 11 (3), 504–512 (2017).
K. A. Tereshchenko, A. S. Ziganshina, V. P. Zakharov, and N. V. Ulitin, “Modeling of the kinetics of producing the polymer component of sticky glue, low molar mass polybutadiene,” Klei, Germetiki, Tekhnol., No. 2, 34–39 (2017).
Funding
The research was carried out within the framework of a state assignment for 2017–2019, initiative scientific project no. 10.5548.2017/8.9.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by D. Shiyan
Rights and permissions
About this article
Cite this article
Ziganshina, A.S., Shiyan, D.A., Ganiev, G.M. et al. Controlling the Activity of Particles of TiCl4–Al(i-C4H9)3 Catalytic System by Changing Their Dispersion Composition in the Process of Producing Low-Molar-Mass Polybutadiene—a Component of Sticky Glue. Polym. Sci. Ser. D 13, 365–371 (2020). https://doi.org/10.1134/S199542122004022X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S199542122004022X