Abstract
The behavior of the sound spectrum of free vibrations of cylindrical ceramic samples for light yellow face bricks is interpreted depending on the firing conditions, as well as on reinforcing additives of finely milled fiberglass wastes. A correlation of the frequencies and relaxation times of vibrations with the presence of internal defects and the compressive and bending strengths is found. A testing methodology that reduces the costs of industrial scaling-up of such a reinforcing technology for construction ceramics is proposed.
Similar content being viewed by others
REFERENCES
P. V. Muñoz, M. P. Morales, V. G. Letelier, and M. A. Mendivil, Constr. Build. Mater 125, 241 (2016). https://doi.org/10.1016/j.conbuildmat.2016.08.024
N. V. Boltakova, G. R. Faseeva, R. R. Kabirov, R. M. Nafikov, and Y. A. Zakharov, Waste Manage. 60, 230 (2016). https://doi.org/10.1016/j.wasman.2016.11.008
GOST 23829-85: Acoustic Nondestructive Testing (Izd. Standartov, Moscow, 1986).
E. Z. Kovarskaya and I. B. Moskovenko, Mire Nerazrushayushchego Kontrolya 58 (4), 13 (2012).
ASTM C1259-15: Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration (ASTM, West Conshohocken, PA, 2015).
ASTM C1198-09(2013): Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance (ASTM, West Conshohocken, PA, 2013).
GOST 25714-83: Non-Destructive Control. Acoustic Sound Method of Open Porosity, Apparent Density, Density and Compression Strength Testing of Refractory Articles (Izd. Standartov, Moscow, 1983).
GOST R 52710-2007: Abrasive Tools. Acoustic Method for Determination of Hardness and Sound Indices by Reduced Acoustic Wave Velocity (Standartinform, Moscow, 2008).
GOST 24332-88: Silica Bricks and Stones. Ultrasonic Method of Compressive Strength Determination (Izd. Standartov, Moscow, 1989).
F. Belli and F. J. Radermacher, in Proc. 5th Int. Conf. on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, Paderborn,1992, p. 123.
I. Hertlin and S. Rieth-Hoerst, Tile & Brick International Manual (DVS, 2007).
P. Bosomworth, Ceram. Ind., No. 1, 20 (2005).
E. Z. Kovarskaya and I. B. Moskovenko, Mire Nerazrushayushchego Kontrolya 68 (2), 27 (2015).
A. Ratle, M. Lagacét, V. Pandolfelli, C. Allairet, and M. Rigaudt, J. Can. Ceram. Soc. 65, 202 (1996).
T. Húlan, H. J. Ondruška, R. Podoba, and A. Trnik, Vestn. Mosk. Gos. Obl. Univ. Ser. Fiz.-Mat., No. 2, 54 (2013).
T. Húlan, A. Trník, I. Medved’, I. Štubña, and T. Kaljuvee, AIP Conf. Proc. 1752, 040009 (2016). https://doi.org/10.1063/1.4955240
G. R. Faseeva, R. M. Nafikov, S. E. Lapuk, Yu. A. Zakharov, A. A. Novik, A. A. Vjuginova, R. R. Kabirov, and L. N. Garipov, Ceram. Int. 43, 7202 (2017). https://doi.org/10.1016/j.ceramint.2017.03.008
J. A. Franco-Villafañe, E. Flores-Olmedo, G. Báez, O. Gandarilla-Carrillo, and R. A. Méndez-Sánchez, Eur. J. Phys. 33, 1761 (2012). https://doi.org/10.1088/0143-0807/33/6/1761
V. I. Erofeev, V. V. Kazhaev, and N. P. Semerikova, Waves in Rods. Dispersion. Dissipation. Nonlinearity (Fizmatlit, Moscow, 2002).
GOST 8462-85: Wall Materials. Methods for Determination of Ultimate Compressive and Bending Strength (Izd. Standartov, Moscow, 1987).
M. Barth, F. Duckhorn, K. Tschöke, C. Tschöpe, and B. Köhler, in Proc. 19th World Conf. on Non-Destructive Testing, Munich,2016. http://www.ndt.net/article/wcndt2016/papers/we3f3.pdf.
G. R. Faseeva, R. M. Nafikov, S. E. Lapuk, Yu. A. Zakharov, A. G. Kiyamov, R. R. Kabirov, L. N. Garipov, N. M. Lyadov, and I. A. Faizrakhmanov, Glass Ceram. 74, 450 (2018).
G. R. Faseeva, I. E. Mumdzhi, L. R. Gilyazov, R. M. Nafikov, Yu. A. Zakharov, R. R. Kabirov, and S. I. Nikitin, Vestn. Kaz. Tekhnol. Univ. 20 (3), 68 (2017).
Funding
This work was supported by the Ministry of Education and Science of the Russian Federation (contract no. 02.G25.31.0121, 2014).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they do not have any conflicts of interest.
Additional information
Translated by O. Kadkin
Rights and permissions
About this article
Cite this article
Nafikov, R.M., Faseeva, G.R., Lysogorskiy, Y.V. et al. Acoustic Testing in the Technology of Production of Construction Ceramics with Reinforcing Additives. Tech. Phys. 65, 291–298 (2020). https://doi.org/10.1134/S1063784220020164
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063784220020164