Abstract
The results of studying steel cladded intermetallic rods manufactured by means of high-temperature gas extrusion applied for the first time for reactive powder mixtures are presented. The tests were performed on the Ni–Al model system.
Similar content being viewed by others
REFERENCES
V. D. Berbentsev and Yu. S. Konyaev, Kuznechno-Shtampovochnoe Proizvod., No. 10, 10 (1980).
V. D. Berbentsev, Perspekt. Mater., No. 4, 67 (2019).
V. D. Berbentsev, M. I. Alymov, and S. S. Bedov, Ross. Nanotekhnol. 2 (7), 116 (2007).
D. Sivaprahasam, S. B. Chandrasekhar, K. Murugan, and K. V. P. Prabhakar, Mater. Res. Innovations 1 (2019). https://doi.org/10.1080/14328917.2019.1580889
A. M. Stolin and P. M. Bazhin, Theor. Found. Chem. Eng. 48 (6), 751 (2014).
P. M. Bazhin, A. M. Stolin, M. I. Alymov, and A. P. Chizhikov, Perspekt. Mater., No. 11, 73 (2014).
P. M. Bazhin, A. M. Stolin, V. A. Shcherbakov, and E. V. Zamyatkina, Dokl. Chem. 430 (2), 58 (2010).
M. A. Awotunde, O. O. Ayodele, A. O. Adegbenjo, A. M. Okoro, M. B. Shongwe, and P. A. Olubambi, Int. J. Adv. Des. Manuf. Technol., 1 (2019).
N. P. Lyakishev, Phase Diagrams of Binary Metallic Systems (Mashinostroenie, Moscow, 1996), Vol. 1 [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by E. Glushachenkova
Rights and permissions
About this article
Cite this article
Galiev, F.F., Saikov, I.V., Berbentsev, V.D. et al. High-Temperature Gas Extrusion of a Reactive Ni + Al Powder Mixture. Dokl. Phys. 64, 446–448 (2019). https://doi.org/10.1134/S1028335819120024
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1028335819120024