Abstract
This paper describes a novel electro hybrid mechanical system which consists of the following components: electrohydrodynamic printing combined with the fused deposition modeling, electrospinning, and electrospray. The electrohydrodynamic printing section with the fused deposition modeling of the electro hybrid mechanical system was used to obtain fibers from thermoplastics such as polylactic acid, thermoplastic polyurethane, polyethylene terephthalate-glycol, acrylonitrile–butadiene–styrene copolymer, and high impact polystyrene. This study reports the changes in the 2D array and the 3D scaffold structure of the samples and exhibits their characteristics and performance evaluations by comparing them under the same production conditions.
Similar content being viewed by others
REFERENCES
J. Tan and M. M. Saltzman, Biomaterials 23, 3215 (2002).
Q. Hamid, J. Snyder, C. Wang, M. Timmer, J. Hammer, S. Guceri, and W. Sun, Biofabrication 3, 034109 (2011).
K. Wang, L. Cai, L. Zhang, J. Dong, and S. Wang, Adv. Healthcare Mater. 1, 292 (2012).
Y. Jin, Q. Gao, C. Xie, G. Li, J. Du, J. Fu, and Y. He, Mater. Des. 185, 108274 (2020).
D. Dimitrov, K. Schreve, and N. De Beer, Rapid Prototyping J. 12, 136 (2006).
I. Zein, D. W. Hutmacher, K. C. Tan, and S. H. Teoh, Biomaterials 23, 1169 (2002).
E. Kouhi, S. Masood, and Y. Morsi, Assem. Autom. 28, 246 (2008).
D. Dimitrov, W. Van Wijck, K. Schreve, N. De Beer, and J. Meijer, CIRP Ann. 52, 189 (2003).
M. Cloupeau and B. Prunet-Foch, J. Aerosol Sci. 25, 1021 (1994).
J. S. Kim, W. S. Chung, K. Kim, D. Y. Kim, K. J. Paeng, S. M. Jo, and S. Y. Jang, Adv. Funct. Mater. 20, 3538 (2010).
T. J. Sill and H. A. von Recum, Biomaterials 29, 1989 (2008).
M. Rasekh, Z. Ahmad, R. Day, A. Wickam, and M. Edirisinghe, Adv. Eng. Mater. 13, 296 (2011).
D. Grafahrend, K.H. Heffels, M. V. Beer, P. Gasteier, M. Möller, G. Boehm, P. D. Dalton, and J. Groll, Nat. Mater. 10, 67 (2011).
M. J. Poellmann, K. L. Barton, S. Mishra, A. J. W. Johnson, Macromol. Biosci. 11, 1164 (2011).
M. W. Chang, E. Stride, and M. Edirisinghe, Langmuir 26, 5115 (2010).
M. Koç, L. Paralı, and O. Şan, Polym. Test. 90, 106695 (2020).
D. Y. Lee, Y. S. Shin, S. E. Park, T. U. Yu, and J. Hwang, Appl. Phys. Lett. 90, 1 (2007).
Y. Jang, J. Kim, and D. Byun, J. Phys. D: Appl. Phys. 46, 155103 (2013).
Y. Jang, I. Hartarto Tambunan, H. Tak, V. Dat Nguyen, T. Kang, and D. Byun, Appl. Phys. Lett. 102, 1 (2013).
B. Quang Tran Si, D. Byun, and S. Lee, J. Aerosol Sci. 38, 924 (2007).
C. Wei and J. Dong, J. Micromech. Microeng. 23, 025017 (2013).
L. Sha, Z. Chen, Z. Chen, A. Zhang, and Z. Yang, Int. J. Polym. Sci. 2016, 1 (2016).
L. Avérous, in Monomers, Polymers and Composites from Renewable Resources, Ed. by M. N. Belgacem and A. Gandini (Elsevier Ltd., Amsterdam, 2008), pp. 433–450.
Q. Chen, J. D. Mangadlao, J. Wallat, A. De Leon, J. K. Pokorski, and R. C. Advincula, ACS Appl. Mater. Interfaces 9, 4015 (2017).
A. C. De Leon, Q. Chen, N. B. Palaganas, J. O. Palaganas, J. Manapat, and R. C. Advincula, React. Funct. Polym. 103, 141 (2016).
F. Elkholy, S. Schmidt, M. Amirkhani, F. Schmidt, and B. G. Lapatki, J. Healthcare Eng. 10, 1 (2019).
R. B. Dupaix and M. C. Boyce, Polymer 46, 4827 (2005).
T. Lloyd, C. Nightingale, and R. Edler, Br. J. Oral Maxillofac. Surg. 39, 301 (2001).
W. Oh and C. Wang, J. Prosthet. Dent. 98, 335 (2007).
Y. S. Ma, D. Y. Fang, N. Zhang, X. J. Ding, K. Y. Zhang, and Y. X. Bai, Chin. J. Dent. Res. 19, 43 (2016).
D. Fang, N. Zhang, H. Chen, and Y. Bai, Dent. Mater. J. 32, 946 (2013).
E. J. McCullough and V. K. Yadavalli, J. Mater. Process. Technol. 213, 947 (2013).
M. Guvendiren, J. Molde, R. M. D. Soares, and J. Kohn, ACS Biomater. Sci. Eng. 2, 1679 (2016).
R. Singh, R. Kumar, I. Farina, F. Colangelo, L. Feo, and F. Fraternali, Polymers 11, 1(2019).
B. Zhang, B. Seong, V. D. Nguyen, and D. Byun, J. Micromech. Microeng. 26, 25015 (2016).
J. Choi, Y. J. Kim, S. Lee, S. U. Son, H. S. Ko, V. D. Nguyen, and D. Byun, Appl. Phys. Lett. 93, 87 (2008).
Y. Huang, G. Song, X. Chang, Z. Wang, X. Zhang, S. Han, Z. Su, H. Yang, D. Yang, and X. Zhang, Int. J. Nanomed. 13, 2665 (2018).
J. T. Yeh, C. H. Tsou, Y. M. Li, H. W. Xiao, C. S. Wu, W. L. Chai, Y. C. Lai, and C. K. Wang, J. Polym. Res. 19, 9766 (2012).
M. Kattan, E. Dargent, J. Ledru, and J. Grenet, J. Appl. Polym. Sci. 81, 3405 (2001).
Z. Wang, J. Wang, M. Li, K. Sun, and C. J. Liu, Sci. Rep. 4, 5939 (2014).
Y. Tao, J. Shao, P. Li, and S. Q. Shi, Mater. Tehnol. 53, 71 (2019).
R. Jayakumar, M. Rajkumar, R. Nagendran, and S. Nanjundan, J. Appl. Polym. Sci. 85, 1194 (2002).
M. A. Cuiffo, J. Snyder, A. M. Elliott, N. Romero, S. Kannan, and G. P. Halada, Appl. Sci. 7, 1 (2017).
T. Chen, G. Jiang, G. Li, Z. Wu, and J. Zhang, RSC Adv. 74, 60570 (2015).
N. Choksi and H. Desai, Int. J. Appl. Chem. 13, 377 (2017).
H. Nakamura, H. Sakai, S. Aoshima, and M. Abe, J. Oleo Sci. 51, 781 (2002).
I. N. Strain, Q. Wu, A.M. Pourrahimi, M. S. Hedenqvist, R. T. Olsson, and R. L. Andersson, J. Mater. Chem. A 3, 1632 (2015).
T. Chen, W. Zhang, and J. Zhang, Polym. Degrad. Stab. 120, 232 (2015).
M. Miloudi, L. Dascalescu, J. Li, S. El-Mossouess, and K. Medles, IEEE Trans. Dielectr. Electr. Insul. 20, 1510 (2013).
M. Miloudi, M. Remadnia, C. Dragan, K. Medles, A. Tilmatine, and L. Dascalescu, IEEE Trans. Ind. Appl. 49, 699 (2013).
O. Y. Gumus, R. Ilhan, and B. E. Canli, J. Mater. Eng. Perform. 31, 3570 (2022).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest
Rights and permissions
About this article
Cite this article
Levent Paralı, Koç, M. & Yıldız, Z. 2D/3D Direct Writing of Thermoplastics through Electrohydrodynamic Printing. Polym. Sci. Ser. A 64, 559–572 (2022). https://doi.org/10.1134/S0965545X22700183
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0965545X22700183