Abstract
A combined technology is developed to increase the service life of machine components. It combines the advantages of “cold” gas-dynamic (supersonic) spraying and plasma electrolytic oxidation and can be used to deposit high-quality coatings onto tractor parts. The interaction of particles with a surface during gasdynamic spraying is theoretically estimated, and rational spraying conditions are chosen. The service properties of the deposited coatings are experimentally studied.
Similar content being viewed by others
REFERENCES
Yu. A. Kuznetsov, V. V. Goncharenko, and K. V. Kulakov, Innovative Methods of Gas-Thermal Coating Deposition (Izd. Orel GAU, Orel, 2011).
A. F. Puzryakov, I. N. Kravchenko, A. V. Kolomeichenko, A. S. Osipkov, and A. A. Puzryakov, “New approaches to increasing the life of machine components by gas-thermal deposition of nanostructured materials,” Remont. Vosstanovlenie. Modernizatsiya, No. 6, 32–35 (2014).
I. N. Kravchenko, V. M. Korneev, A. A. Kolomeichenko, and I. E. Pupavtsev, “Effective technological methods of coating deposition by gas-flame spraying,” Vestn. FGOU VPO Mosk. Gos. Agro. Univ., No. 1 (65), 36–41 (2015).
I. N. Kravchenko, A. F. Puzryakov, V. M. Korneev, et al., Technological Processes in Technical Service of Machines and Equipment (INAFRA-M, Moscow, 2017).
V. M. Korneev, I. N. Kravchenko, A. G. Gamidov, and D. I. Petrovskii, Technology of Machine Repair (OOO Megapolis, Moscow, 2018).
V. V. Tikhonenko and A. M. Shkil’ko, “Microarc oxidation,” Vost.-Evrop. Zh. Pered. Tekhn. 2 (13 (56)), 13–18 (2012).
Yu. A. Kuznetsov, I. N. Kravchenko, V. V. Goncharenko, and M. A. Glinskii, “Mechanical treatment of ceramic oxide coatings deposited by plasma electrolytic oxidation,” Tekhn. Metallov, No. 10, 18–24 (2017).
A. V. Epel’fel’d, P. N. Belkin, A. M. Borisov, V. A. Vasin, B. L. Krit, V. B. Lyudin, O. V. Somov, V. A. Sorokin, I. V. Suminov, and V. P. Frantskevich, Modern Technologies of Surface Modification and the Deposition of Protective Coatings. Vol. 1. Microarc Oxidation (Renome, St. Petersburg, 2017).
A. Kosenko, A. V. Kolomeichenko, Yu. A. Kuznetsov, N. V. Titov, R. Yu. Solovyev, and S. N. Sharifullin, “Investigation of coating thickness obtained by plasma electrolytic oxidation on aluminium alloys in electrolytes of type “KOH–H3BO3,” J. Phys.: Conf. Ser. 1058, 012065 (2018).
Yu. A. Kuznetsov, I. N. Kravchenko, V. V. Goncharenko, and M. A. Glinskii, “Machining of the ceramic oxide coating formed by plasma electrolytic oxidation,” Russ. Metall. (Metally), No. 13, 82–86 (2018). https://doi.org/10.1134/S003602951813013
A. I. Kashirin and A. V. Shkodkin, “Gas-dynamic spraying of metallic coatings: development and the state of the art,” Upr. Tekhn. Pokr., No. 12 (36), 22–33 (2007).
A. P. Alkhimov, S. V. Klinov, V. F. Kosarev, and V. M. Fomin, Cold Gas-Dynamic Spraying. Theory and Practice (Fizmatlit, Moscow, 2010).
Yu. A. Kuznetsov and V. V. Goncharenko, “Technologies of high-speed spraying,” Tekhn. Oborud. Sela, No. 8 (194), 40–45 (2013).
V. E. Arkhipov, A. F. Londarskii, G. V. Moskvitin, and M. S. Pugachev, Gas-Dynamic Spraying. Structure and Properties of Coatings (Krasand, Moscow, 2017).
Yu. A. Kuznetsov, I. N. Kravchenko, A. V. Sirotov, and T. A. Chekha, “Adhesion and wear resistance of the coatings deposited using a combined technology,” Remont. Vosstanovlenie. Modernizatsiya, No. 7, 28–33 (2018). https://doi.org/10.31044/1684-2561-2018-0-7-28-33
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by K. Shakhlevich
Rights and permissions
About this article
Cite this article
Kuznetsov, Y.A., Kravchenko, I.N., Sevryukov, A.A. et al. Technological Methods for Increasing the Life of Machine Components. Russ. Metall. 2019, 1421–1426 (2019). https://doi.org/10.1134/S0036029519130184
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029519130184