Abstract
We give a survey of the development of basic ideas and implementation methods for technologies of solving complex problem, primarily calendar planning, done with the author’s participation.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Shkurba, V.V., Avtomatizirovannye sistemy upravleniya predpriyatiem (Automated Systems for Plant Management), Kiev: Naukova Dumka, 1966.
Krepish, P.V., Metodika kalendarnogo planirovaniya proizvodstva na mashinostroitel’nykh predpriyatiyakh (Calendar Planning Methods on Machinery Production Plants), Moscow: Mashgiz, 1961.
Conwey, R.H., Maxwell, W.L., and Miller, L.V., Theory of Schedules, New York: Addison-Wesley, 1967. Translated under the tile Teoriya paspisanii, Moscow: Nauka, 1975.
Moot, J.F. and Thomson, J.L., Kalendarnoe planirovanie (Calendar Planning), Moscow: Progress, 1966.
Matematicheskie metody v organizatsii i ekonomike proizvodstva (Mathematical Methods in Production Management and Economics), Dumler, S.A.. Ed., Moscow: Mashinostroenie, 1966.
Organizatsiya proizvodstva na promyshlennykh predpriyatiyakh SShA (Organizing Production on Industrial Plants in the United States), Moscow: Inostrannaya Literatura, 1960–1961, vols. 1 and 2.
Shkurba, V.V., Zadachi kalendarnogo planirovaniya i metody ikh resheniya (Calendar Planning Problems and Methods for Their Solutions), Kiev: Naukova Dumka, 1966.
Tanaev, V.S. and Shkurba, V.V., Vvedenie v teoriyu raspisanii (Introduction to Scheduling Theory), Moscow: Nauka, 1975.
Shkurba, V.V., Teoriya raspisanii. 1. Kombinatornye zadachi. 2. Obshchie podkhody i metody modelirovaniya (Scheduling Theory. I. Combinatorial Problems. II. General Approaches and Modeling Methods), Kiev: DNTP, 1964.
Shkurba, V.V., Zadacha trekh stankov (The Three Machine Problem), Moscow: Nauka, 1975.
Tanaev, V.S., Kovalyov, M.Ya., and Shafransky, Ya.M., Teoriya raspisanii. Gruppovye tekhnologii (Scheduling Theory. Group Technologies), Minsk: ITK, 1998.
Tanaev, V.S., Sotskov, Yu.N., and Strusevich, V.A., Teoriya raspisanii. Mnogostadiinye sistemy (Scheduling Theory. Multi-stage Systems), Moscow: Nauka, 1989.
Tanaev, V.S., Gordon, V.S., and Shafransky, Ya.M., Teoriya raspisanii. Odnostadiinye sistemy (Scheduling Theory. Single-stage Systems), Moscow: Nauka, 1984.
Lazarev, A.A. and Gafarov, E.R., Teoriya raspisanii. Minimizatsiya summarnogo zapazdyvaniya dlya odnogo pribora (Scheduling Theory. Minimizing Total Delay for a Single Device), Moscow: Vychisl. Tsentr Ross. Akad. Nauk, 2006.
Garey, M.R. and Johnson, D.S., Computers and Intractability: A Guide to the Theory of NP-Completeness, San Francisco: Freeman, 1979. Translated under the title Vychislitel’nye mashiny i trudnoreshaemye zadachi, Moscow: Mir, 1982.
Shkurba, V.V., Sistema “L’vov”-zamysel, razrabotka, vnedrenie i razvitie (The “Lvov” System: Design, Development, Implementation, and Extensions), Kiev: UkrNIINTI, 1973.
Shkurba, V.V., Accentuated Economics and Praxeotechnics of Management, Ekonom. Kibernetika, 2000, no. 1, pp. 22–34.
Alekseev, A.S., Point Transformation Method in Problems of Designing an Optimal Schedule of Rhythmic Production, Izv. Vyssh. Uchebn. Zaved., Radiofizika, 1960, vol. III, no. 4.
Monden, Y., Toyota Production System, An Integrated Approach to Just-In-Time, Norcross: Engineering & Management Press, 1998. Translated under the title “Toiota:” metody effektivnogo upravleniya, Moscow: Ekonomika, 1989.
Shkurba, V.V., Sequential Design Circuits in Discrete Systems Optimization, Doctoral Dissertation, Kiev: IK AN USSR, 1970.
Shkurba, V.V., Planirovanie diskretnogo proizvodstva v usloviyakh (Planning Discrete Production under Constraints), Kiev: Tekhnika, 1975.
Shkurba, V.V., Planirovanie i upravlenie v avtomatizirovannom proizvodstve (Planning andManagement in Automated Production), Kiev: Naukova Dumka, 1985.
Shannon, R.E., Systems Simulation: The Art and Science, New York: Prentice Hall, 1975. Translated under the title Imitatsionnoe modelirovanie sistem. Iskusstvo i nauka, Moscow: Mir, 1978.
Solomentsev, Yu.M., Osnovy avtomatizatsii mashinostroitel’nogo proizvodstva (Fundamentals of Automating Machinery Production), Moscow: Vysshaya Shkola, 1999.
Shkurba, V.V., Cybernetics and ... (on the Conceptology of a Forbidden Science), Kibern. Sist. Analiz, 1995, no. 2, p. 3.
Shkurba, V.V., Computerization: A Revolution in Praxeotechnics, in Metody kibernetiki i informatsionnye tekhnologii. Sb. nauch. tr. (Proc. of “Cybernetic Approaches and Informational Technologies”), Saratov: Saratov. Gos. Univ., 1994, no. 1, pp. 58–78.
Shkurba, V.V., Sistemologiya, sistemotekhnika, sistemnyi analiz (Systemology, Systemotechnics, System Analysis), Preprint of Inst. of Cybernetics, Kiev, 1974.
Soros, G., The New Paradigm for Financial Markets: The Credit Crisis of 2008 and What It Means, New York: PublicAffairs, 2008. Translated under the title Novaya paradigma finansovykh rynkov, Moscow: Mann, Ivanov i Ferber, 2008.
Shkurba, V.V., Rynok: ot torga k tsivilizatsii (Market: From Trade to Civilization), Preprint of NIIMS, Moscow, 1992.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.V. Shkurba, 2010, published in Avtomatika i Telemekhanika, 2010, No. 10, pp. 122–132.
This paper is based upon a survey lecture delivered by the author for graduate students in the Institute of Informational Control Systems of the State Management University before their final exams. The cited references point to the literature recommended for the graduate students, at least for cursory reading.
Rights and permissions
About this article
Cite this article
Shkurba, V.V. Calendar planning. Constructive optimization. The praxeotechnics industry. Autom Remote Control 71, 2122–2131 (2010). https://doi.org/10.1134/S0005117910100115
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0005117910100115