Abstract
Results of experimental study of the temperature field of coatings deposited under different conditions are presented. Revealed in this paper are the basic technical options of the control of the thermal state of coatings and determination of the noncrystalline solidification regimes of melt.
Similar content being viewed by others
REFERENCES
Pavlenko, A.N., Tsoi, A.N., Surtaev, A.S., Kuznetsov, D.V., Kalita, V.I., Komlev, D.I., Ivannikov, A.Y., and Radyak, A.A., Experimental study of rewetting of a superheated plate with structured capillary-porous coating by flowing liquid film, High Temp., 2018, vol. 56, no. 3, pp. 404–409.
Shmakov, A.N., Antsiferov, V.N., Bulanov, V.Ya., and Khanov, A.M., Problemy poroshkovogo materialovedeniya. Chast’ VI. Plazmenno-lazernye pokrytiya (Powder Material Science, Part 4: Plasma-Laser Coatings), Yekaterinburg: Ural. Otd., Ross. Akad. Nauk, 2006.
Barvinok, V.A., Bogdanovich, V.I., Mar’in, S.B., and Dokukina, I.A., Metallographic studies of mesostructural order of plasma oxide coatings, Tsvetn. Met., 2015, vol. 867, no. 3, pp. 59–63.
Ushakov, A.V., Karpov, I.V., Lepeshev, A.A., Petrov, M.I., Fedorov, L.Yu., Gokhfel’d, D.M., Zharkov, S.M., Zeer, G.M., Demin, V.G., and Abkaryan, A.K., The influence of CuO dopant nanoparticles, prepared via the arc plasma synthesis method, on the critical current of YBa2Cu3O7–σ composites, Inorg. Mater.: Appl. Res., 2019, vol. 10, no. 4, pp. 999–1002. https://doi.org/10.1134/S2075113319040439
Ushakov, A.V., Karpov, I.V., Fedorov, L.Yu., Dorozhkina, E.A., Karpova, O.N., Shaikhadinov, A.A., Demin, V.G., Demchenko, A.I., Brungardt, M.V., and Goncharova, E.A., Formation of CuO and Cu2O crystalline phases in a reactor for low-pressure arc discharge synthesis, Inorg. Mater.: Appl. Res., 2020, vol. 11, no. 1, pp. 232–237. https://doi.org/10.1134/S2075113320010372
Ushakov, A.V., Karpov, I.V., Fedorov, L.Yu., Dorozhkina, E.A., Karpova, O.N., Shaikhadinov, A.A., Demin, V.G., Demchenko, A.I., Brungardt, M.V., and Goncharova, E.A., Ionization processes in arc discharge of low pressure, Inorg. Mater.: Appl. Res., 2020, vol. 11, no. 4, pp. 757–761. https://doi.org/10.1134/S2075113320040395
Barotov, F.B., Nozdrin, I.V., and Galevskii, G.V., Thermodynamics of the interaction of tungsten (VI) oxide with hydrocarbons in a plasma flow of nitrogen, Vestn. Gorno-Metall. Sekts., Ross. Akad. Estestv. Nauk, Otd. Metall., 2018, no. 41, pp. 135–139.
Il’inkova, T.A. and Tagirov, A.T., Oxidation of the sublayer of plasma heat-insulating coatings during high-temperature treatment, Uprochnyayushchie Tekhnol. Pokrytiya, 2015, vol. 122, no. 2, pp. 3–9.
Vinogradov, A.M., Plasma spraying of powder coatings, Probl. Sovrem. Nauki Obraz., 2015, vol. 35, no. 5, pp. 31–33.
Alyakretskii, R.V., Karchebnyi, M.Yu., Zommer, S.A., Giri, A.V., and Mikheev, A.E., Research of plasma spraying conditions on coating heat-resistance, Reshetnevskie Chteniya, 2015, vol. 1, pp. 6–7.
Tarasova, T.V., Gusarov, A.V., Protasov, K.E., and Filatova, A.A., Effect of thermal fields on the structure of corrosion-resistant steels under different modes of laser treatment, Met. Sci. Heat Treat., 2017, vol. 59, no. 10, pp. 433–440.
Pavlenko, A.M., Usenko, B.O., and Koshlak, A.V., Formation of an amorphous layer of metals, Tekh. Nauki–Teor. Prakt., 2013, no. 23, pp. 114–122.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
This work was supported by the Russian Foundation for Basic Research (project no. 18-48-242002), Krasnoyarsk krai Goverment, and Science Foundation of Krasnoyarsk krai within the Project “Physical-chemical processes and mathematical simulation of arc vacuum synthesis of nanopowders and coatings based on quasilcrystalline Al–Cu–Fe alloys.”
Additional information
Translated by F.A. Baron
Rights and permissions
About this article
Cite this article
Lepeshev, A.A., Ushakov, A.V., Karpov, I.V. et al. Experimental Study of the Thermal State of Plasma Coatings. Inorg. Mater. Appl. Res. 12, 83–87 (2021). https://doi.org/10.1134/S2075113321010226
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113321010226