Abstract—The effect of the boron microalloying on the structure and mechanical properties of a weld of high-strength steel with a standard yield stress of 750 MPa has been studied. On the basis of the results, a flux-cored wire of brand 48PP-69 has been developed.
Similar content being viewed by others
REFERENCES
Grabin, V.F., Metallovedenie svarki plavleniem (Metal Science of Welding by Metling), Kiev: Naukova Dumka, 1982.
Pokhodnya, I.K., Orlov, L.N., shevchenko, G.A., and Shlepakov, V.N., Effect of alloying on the mechanical properties of welded joints from powdered wires, Avtom. Svarka, 1985, no. 7 (388), pp. 10–11.
Evans, G.M., Microstructure and properties of ferritic steel welds containing Al and Ti, Weld. J., 1995, vol. 74, no. 8, pp. 249–261.
Khayakava, N., Sakaguti, S., Kavabata, F., Okatsu, M., Ota, M., Nisiyama, S., Nagatani, K., and Isizaki, K., RF Patent 2434070, Byull. Izobret., 2011, no. 32, p. 26.
Fainberg, L.I., Rybakov, A.A., Alimov, A.N., and Rozert, R., Microalloying of joints with titanium and boron in multi-arc welding of large-diameter gas-oil pipes, Avtom. Svarka, 2007, no. 5, pp. 20–25.
Podgaetskii, V.V., Effect of the chemical composition of the weld on its microstructure and mechanical properties, Avtom. Svarka, 1991, no. 2, pp. 1–9.
Oerlikon Schweisstechnik, Consumables. https://www. oerlikon-welding.com. Accessed March 15, 2018.
Drahtwarenfabrik-Drahtzug Stein, Materialien und Verfahren. http://www.drahtzug.com/de/unternehmen/ materialien-und-verfahren/. Accessed March 15, 2018.
Stainless Steel Welding: ESAB Technical Handbook. http://www.esab.com/gb/en/support/upload/Technical-Handbook-Stainless-Steel-Welding.pdf. Accessed March 15, 2018.
Makarenko, V.D., Belyaev, V.A., Prokhorov, N.N., Shatilo, S.P., and Chernov, V.Yu., Effect of modifying additives on the mechanical and viscoplastic properties of welded joints of oil and gas pipelines, Svar. Proizvod., 2001, no. 5, pp. 9–13.
Houdremont, E., Einführung in die Sonderstahlkunde, Berlin: Springer-Verlag, 1935.
Burkhard, J., Lau, T., North, T.H, and L’Esperance, G., Effect of aluminum on the Ti–O–B–N balance in submerged arc welding, Weld. J., 1988, vol. 67, no. 8, pp. 25–30.
ACKNOWLEDGMENTS
The experimental studies were carried out on the equipment of the Center for Collective Use of Scientific Equipment Composition, Structure, and Properties of Structural and Functional Materials of the National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey with the financial support of the Russian Ministry of Education and Science under agreement no. 14.595.21.0004 (unique identification no. RFMEFI59517X0004).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Kadkin
Rights and permissions
About this article
Cite this article
Melnikov, P.V., Gezha, V.V., Motovilina, G.D. et al. Effect of Boron Microalloying on the Structure and Properties of a Welded Joint Made of a Flux-Cored Wire for Welding of Flat-Rolled High-Strength Steel Plates with a Standard Yield Stress of 750 MPa. Inorg. Mater. Appl. Res. 9, 1165–1168 (2018). https://doi.org/10.1134/S2075113318060199
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113318060199