Abstract
The dependence of the abrasive-wear resistance of an epoxy–sandy composite on sand content was studied. It was shown that abrasive-wear resistance of such composite is directly dependent on sand content and the maximum value is exceeded at 70 pts. wt of sand. The mechanism of the composite abrasive wear is comparable with the change of the tribotechnical indicators of homogenous materials
Similar content being viewed by others
References
A. M. Mikhal’chenkov, R. Yu. Solov’ev, and Ya. Yu. Biryulina, “Restoration of dumps by abrasion-resistant dispersion-hardened composite on the basis of epoxy resin,” Trakt. Sel’khozmash., No. 3, 49–51 (2015).
Yu. I. Filin, T. A. Ermakova, and M. A. Mikhal’chenkova, “A technique for determining the resistance to abrasive wear of polymer dispersed composites while optimizing their composition,” Vestn. Bryansk. Gos. S-kh. Akad., No. 3, 49–55 (2016).
Ya. Yu. Biryulina and M. A. Mikhal’chenkova, “Use of abrasion-resistant epoxy compositions reinforced with dispersed particles from natural sands, for the restoration of details (dumps and cultivator paws for sowing seeds), in Proceedings of the Engineering-Technological Faculty, Ed. by A. M. Mikhal’chenkov (Bryansk, 2015), pp. 79–96 [in Russian].
A. M. Mikhal’chenkov, Ya. Yu. Biryulina, and Yu. I. Filin, “Evolution of accelerated comparative tests of polymer dispersed composites on abrasive resistance,” Remont, Vosstanov., Modernizatsiya, No. 4, 41–43 (2016).
M. M. Khrushchev and M. A. Babichev, Abrasion Wear (Nauka, Moscow, 1970) [in Russian].
B. I. Kostetskii, I. G. Nosovskii, A. K. Karaulov, et al., Surface Strength of Materials in Friction (Tekhnika, Kiev, 1976) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.M. Mikhal’chenkov, V.E. Torikov, Yu.I. Filin, 2017, published in Klei, Germetiki, Tekhnologii, 2017, No. 4, pp. 43–45.
Rights and permissions
About this article
Cite this article
Mikhal’chenkov, A.M., Torikov, V.E. & Filin, Y.I. The Influence of the Concentration of Components of an Epoxy–Sandy Composite on Its Abrasive-Wear Resistance. Polym. Sci. Ser. D 11, 47–49 (2018). https://doi.org/10.1134/S1995421218010124
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421218010124