Abstract
Preparation of silicon-containing epoxy composites with unique properties using silanes, siloxanes, silica, and polyhedral oligomeric silsesquioxanes (POSSs) was considered. Analysis shows that oligomeric and polymeric siloxanes with terminal and internal reactive functional groups are promising for decreasing the surface energy, increasing the contact angle with water, and enhancing the elasticity, heat resistance, and anticorrosive and antifouling properties of the coatings. It is appropriate to use organosilicon adhesion promoters with various functional groups in multilayer coating systems for enhancing the interlayer adhesion, improving the compatibility of (nano)microfillers with the polymer matrix, and thus making the coatings more durable. This opens wide possibilities for using silicon-containing composites of new generation in the technology of anticorrosive and antifouling coatings and also as electronics materials, materials with decreased flammability, semipermeable membranes, spacecraft coatings, etc.
Similar content being viewed by others
References
Barletta, M., Aversa, C., Pizzi, E., Puopolo, M., and Vesco, S., Prog. Org. Coat., 2018, vol. 123, pp. 267–281.
Selima, M. S., Shenashen, M. A., El-Safty, Sh. A., Higazy, S. A., Selim, M. M., Isago, H., and Elmarakbi, A., Prog. Mater. Sci., 2017, vol. 87, pp. 1–32.
Akuzov, D., Vladkova, T., Zamfirova, G., Gaydarov, V., Nascimento, M. V., Szeglat, N., and Granwald, L., Prog. Org. Coat., 2017, vol. 103, pp. 123–134.
Lejars, M., Margaillan, A., and Bressy, Ch., Chem. Rev., 2012, vol. 112, no. 8, pp. 4347–4390.
Wang, Y., Betts, D. E., Finlay, J. A., Brewer, L., Callow, M. E., Callow, J. A., Wendt, D. E., and DeSimone, J. M., Macromolecules, 2011, vol. 44, no. 4, pp. 878–885.
Rasulev, B., Jabeen, E., Stafslien, S. J., Chisholm, B. J., Bahr, J., Ossowski, M., and Boudjouk, Ph., ACS Appl. Mater. Interfaces, 2017, vol. 9, no. 2, pp. 1781–1792.
Karpov, V. A., Koval’chuk, Yu. L., Poltarukha, O. P., and Il’in, I. N., Kompleksnyi podkhod k zashchite ot morskogo obrastaniya i korrozii (Integrated Approach to Protection of Maritime Biofouling and Corrosion), Moscow: KMK. 2007.
Drinberg, A. S., Kalinskaya, T. V., and Udenko, I.A. Tekhnologiya sudovykh pokrytii (Marine Coating Technology), Moscow: LKM, 2016.
Mironova, G. A., Il’darkhanova, F. I., Kopteva, V. V., and Bogoslovskii, K. G., Lakokras. Mater. Ikh Primen., 2010. nos. 1–2, pp. 84–86.
Salta, M., Wharton, J. A., Stoodley, J. A., Dennington, S. P., Goodes, L. R., Werwinski, S., Mart, U., Wood, R.J K., and Stokes, K. R., Philos. Trans. R. Soc., 2010, vol. 368, no. 1929, pp. 4729–1754.
Mironova, G. A., Il’darkhanova, F. I., Bogoslovskii, K. G., Vecherskii, I. V., and Averin, E. V., Lakokras. Mater. Ikh Primen., 2009, no. 12, pp. 23–25.
Gagro, D., Farbe Lack, 2018, vol. 124, no. 8, pp. 12–15.
Pouget, E., Tonnar, L., Lucas, P., Lacroix-Desmazes, P., Ganachaud, F., and Boutevin, B., Chem. Rev., 2010. vol. 110, no. 3, pp. 1233–1277.
Yebra, D. M. and Weinell, C. E., Advances in Marine Antifouling Coatings and Technologies, Cambridge: Woodhead, 2009.
Ahmad, S., Ashraf, S. M., Sharmin, E., Mohomad, A., and Alam, M., J. Appl. Polym. Sci., 2006, vol. 100, no. 6, pp. 4981–4991.
Ahmad, S., Gupta, A.P., Sharmin, E., Alam, M., and Pandey, S. K., Prog. Org. Coat., 2005, vol. 54, no. 3, pp. 248–255.
Hou, Sh-Sh., Chung, Y.-P., Chan, Ch-K., and Kuo, P.-L., Polymer, 2000, vol. 41, no. 9, pp. 3263–3272.
Maciejewski, H., Dabek, I., Fiedorow, R., Dutkiewicz, M., and Majchrzak, M., J. Therm. Anal. Calorim., 2012. vol. 110, no. 3, pp. 1415–1424.
Murias, P., Maciejewski, H., and Galina, H., Eur. Polym. J., 2012, vol. 48, no. 4, pp. 769–773.
Park, S.-J., Jin, F.-L., Park, J.-H., and Kim, K.-S., Mater. Sci. Eng. A, 2005, vol. 399, nos. 1–2, pp. 377–381.
Karamanolevski, P., Buzarovska, Al., and Bogoeva-Gaceva, G., Silicon, 2017, pp. 1–11.
Bera, S., Rout, T. K., Udayabhanua, G., and Narayan, R., Prog. Org. Coat., 2016, vol. 101, pp. 24–44.
Hussinaiah, D., Prasad, M., Mohanaraju, K., and Samui, A. B., IOSR J. Eng., 2014, vol. 4, no. 1, pp. 49–60.
Kumar, S. A. and Narayanan, T.S.N.S., Prog. Org. Coat., 2002, vol. 45, no. 4, pp. 323–330.
Byczynski, L., Dutkiewicz, M., and Maciejewski, H., Prog. Org. Coat., 2017, vol. 112, pp. 118–126.
Dworak, D.P. and Soucek, M. D., Prog. Org. Coat., 2003, vol. 47, nos. 3–4, pp. 448–457.
Dworak, D. P. and Soucek, M. D., Macromolecules, 2004, vol. 37, no. 25, pp. 9402–9417.
Soucek, M. D., Dworak, D. P., and Chakraborty, R., J. Coat. Technol. Res., 2007, vol. 4, no. 3, pp. 263–274.
Patent US WO2009017651, Publ. 2009.
Chen, Z., Chisholm, B., Kim, J., Stafslien, S., Wagner R., Patel, S., Daniels, J., Wal, L. V., Li, J., Ward, K., Callow, M., Thompson, S., and Siripirom, C., Polym. Int., 2008, vol. 57, no. 6, pp. 879–886.
Rath, S. K., Chavan, J. G., Sasane, S., Srivastava, A., Path, M., Samui, A. B., Chakraborty, B. C., and Sawant, S. N., Prog. Org. Coat., 2009, vol. 65, no. 3, pp. 366–374.
Rath, S. K., Chavan, J. G., Sasane, S., Jagannath, Path, M., Samui, A. B., and Chakraborty, B. C., Appl. Surf. Sci., 2010, vol. 256, no. 8, pp. 2440–2446.
Thomas, K.-S., Biofouling, 2001, vol. 17, no. 1, pp. 73–86.
Choi, S.-B., Jepperson, J., Jarabek, L., Thomas, J., Chisholm, B., and Boudjouk, Ph., Macromol. Symp., 2007, vols. 249–250, no. 1, pp. 660–667.
Patent US 7771833, Publ. 2010.
Patent US WO2005/030405, Publ. 2005.
Thomas, J., Choi, S.-B., Fjeldheim, R., and Boudjouk, P., Biofouling, 2004, vol. 20, nos. 4/5, pp. 227–236.
Svendsen, J. R., Kontogeorgis, G. M., Kiil, S., Weinell, C. E., and Grunlund, M., J. Colloid Interface Sci., 2007, vol. 316, no. 2, pp. 678–686.
Patent GB 2300370, Publ. 1996.
Gupta, P. and Bajpai, M., Adv. Chem. Eng. Sci., 2011, vol. 1, no. 3, pp. 133–139.
Ma, S., Liu, W., Li, H., Tang, Ch., and Wei, Zh., J. Macromol. Sci., Part B: Phys., 2011, vol. 50, no. 5, pp. 975–987.
Patent DK WO/2005/033219, Publ. 2005.
Patent US 6391464, Publ. 2002.
Esfandeh, M., Mirabedini, S. M., Pazokifard, S., and Tari, M., Colloids Surf. A: Physicochem. Eng. Asp., 2007. vol. 302, nos. 1–3, pp. 11–16.
Montemor, M. F., Surf. Coat. Technol, 2014, vol. 258, pp. 17–37.
Patent US WO/2008/013825, Publ. 2008.
Dalton, H. M., Stein, J., and March, P. E., Biofouling, 2000, vol. 15, nos. 1–3, pp. 83–94.
Mirabedini, S. M., Mohseni, M., PazokiFard, S., and Esfandeh, M., Colloids Surf. A, 2008, vol. 317, nos. 1–3, pp. 80–86.
Stein, J., Truby, K., Wood, C. D., Takemori, M., Vallance, M., Swain, G., Kavanagh, C., Kovach, B., Schultz, M., Wiebe, D., Holm, E., Montemarano, J., Wendt, D., Smith, C., and Meyer, A., Biofouling, 2003, vol. 19, no. 2, pp. 87–94.
Palraj, S., Selvaraj, M., Maruthan, K., and Rajagopal, G., Prog. Org. Coat., 2015, vol. 81, pp. 132–139.
Li, H. Y., Zhang, Z. S., Ma, X. F., Hu, M., Wang, X. Y., and Fan, P. F., Surf. Coat. Technol, 2007, vol. 201, nos. 9–11, pp. 5269–5272.
Vivar Mora, L., Taylor, A., Paul, S., Dawson, R., Wang, Ch., Taleb, W., Owen, J., Neville, A., and Barker, R., Surf. Coat. Technol., 2018, vol. 342, pp. 48–56.
Sun, Y., Zhang, Z., Moon, K., and Wong, C.P., J. Polym. Sci. B: Polym. Phys., 2004, vol. 42, no. 21, pp. 3849–3858.
Vivar Mora, L., Naik, S., Paul, S., Dawson, R., Neville, A., and Barker, R., Surf Coat. Technol, 2017, vol. 324, pp. 368–375.
Jia, L. Y., Zhang, C., Du, Z. J., Li, C. J., and Li, H. Q., J. Appl. Polym. Sci., 2007, vol. 105, no. 5, pp. 2663–2669.
Eslami-Farsani, R., Khosravi, H., and Fayazzadeh, S., Int. J. Chem. Mol. Nucl. Mater. Metall. Eng., 2015, vol. 9, no. 12, pp. 1455–1458.
Spirkova, M., Bras, J., Brozova, L., Strachota, A., Baldrian, J., Urbanova, M., Kotek, J., Strachotov, B., and Slouf, M., Prog. Org. Coat., 2008, vol. 61, nos. 2–4, pp. 145–155.
Afzal, A. and Siddiqi, H. M., Polymer, 2011, vol. 52, no. 6, pp. 1345–1355.
Chakraborty, R. and Soucek, M. D., Eur. Polym. J., 2008, vol. 44, no. 10, pp. 3326–3334.
Ochi, M. and Takahashi, R., J. Polym. Sci. B: Polym. Phys., 2001, vol. 39, no. 11, pp. 1071–1084.
Cardiano, P., Mineo, P., Sergi, S., Ponterio, R. C., Triscari, M., and Piraino, P., Polymer, 2003, vol. 44, no. 16, pp. 4435–4441.
Cardiano, P., Ponterio, R. C., Sergi, S., Lo Schiavo, S., and Piraino, P., Polymer, 2005, vol. 46, no. 6, pp. 1857–1864.
Kongparakul, S., Kornprasert, S., Suriya, P., Le, D., Samart, Ch., Chantarasiri, N., Prasassarakich, P., and Guan, G., Prog. Org. Coat, 2017, vol. 104, pp. 173–179.
Zhang, J., Zhang, W., Lu, J., Zhu, Ch., Lin, W., and Feng, J., Prog. Org. Coat, 2018, vol. 121, pp. 201–208.
Figueira, R. B., Silva, C.J.R., and Pereira, E. V., J. Coat. Technol. Res., 2015, vol. 12, no. 1, pp. 1–35.
Lu, S. R., Zhang, H. L., Zhao, C. X., and Wang, X. Y., J. Mater. Sci., 2005, vol. 40, no. 5, pp. 1079–1085.
Ochi, M. and Matsura, T., J. Polym. Sci. B: Polym. Phys., 2005, vol. 43, no. 13, pp. 1631–1639.
Innocenzi, P. and Kidchob, T., J. Sol-Gel Sci. Technol., 2005, vol. 35, no. 3, pp. 225–235.
Chiang, C. L., Chang, R. C., and Chiu, Y. C., Thermochim. Acta, 2007, vol. 453, no. 2, pp. 97–104.
Prezzi, L. and Mascia, L., Adv. Polym. Technol., 2005, vol. 24, no. 2, pp. 91–102.
Li, W., Huang, D., Xing, X.Y., Tang, J., Xing, Y., Li, X., and Zhang, J., J. Appl. Polym. Sci., 2014, vol. 131, no. 21, pp. 41010–41018.
Bakhshandeh, E., Jannesari, A., Ranjbar, Z., Sobhani, S., and Saeb, M. R., Prog. Org. Coat., 2014, vol. 77, no. 7, pp. 1169–11
Suleiman, R., Dafalla, H., and El Ali, B., RSC Adv., 2015, vol. 5, no. 49, pp. 39155–39167.
Okamatsu, T. and Ochi, M., Polymer, 2002, vol. 43, no. 3, pp. 721–730.
Nazir, T., Afzal, A., Siddiqi, H. M., Ahmad, Z., and Dumon, M., Prog. Org. Coat., 2010, vol. 69, no. 1, pp. 100–1
Brasciotti, F., Snihirova, D. V., Xue, H., Montemor, M. F., Lamaka, S. V., and Ferreira, M.G.S., Corros. Sci., 2013, vol. 67, pp. 82–90.
Chattopahyay, D. K. and Webster, D. C., Prog. Org. Coat., 2009, vol. 66, no. 1, pp. 73–85.
Ge, Ch., Guo, Y., Ma, X., and Hou, B., E-Polymers, 2017, vol. 17, no. 2, pp. 137–148.
Malucelli, G., Amerio, E., Minelli, M., and de Angelis, M.G., Adv. Polym. Technol, 2009, vol. 28, no. 2, pp. 77–85.
Ahmad, Z. and Al-Sagheer, F., Prog. Org. Coat, 2015, vol. 80, pp. 65–70.
Karimi, A. A. and Ahmad, Z., Prog. Org. Coat, 2017, vol. 106, pp. 137–144.
Noparvar-Qarebagh, A., Roghani-Mamaqani, H., and Salami-Kalajahi, M., Micropor Mesopor Mater, 2016, vol. 224, pp. 58–67.
Abdollahi, A., Roghani-Mamaqani, H., Salami-Kalajahi, M., Mousavi, A., Razavi, B., and Shahi, S., Prog. Org. Coat., 2018, vol. 117, pp. 154–165.
Najafi-Shoa, S., Roghani-Mamaqani, H., Salami-Kalajahi, M., Azimi, R., and Gholipour-Mahmou-dalilou, M., J. Mater. Sci., 2016, vol. 51, no. 19, pp. 9057–9073.
Hu, H., Zhao, Sh., Sun, G., Zhong, Y., and You, B., Prog. Org. Coat., 2018, vol. 117, pp. 118–129.
Wan, Y. J., Gong, L. X., Tang, L. C., Wu, L. B., and Jiang, J. X., Compos. Part A: Appl. Sci. Manuf, 2014, vol. 64, pp. 79–89.
Haeri, S. Z., Asghari, M., and Ramezanzadeh, B., Prog. Org. Coat., 2017, vol. 111, pp. 1–12.
Pourhashem, S., Vaezi, M. R., Rashidi, A., and Bagherzadeh, M. R., Prog. Org. Coat., 2017, vol. 111, pp. 47–56.
Alhumade, H., Nogueira, R. R., Yu, A., Elkamel, A., Simon, L., and Abdala, A., Prog. Org. Coat, 2018, vol. 122, pp. 180–188.
Arimitsu, K., Sugioka, S., Watanabe, K., and Furutani, M., Prog. Org. Coat, 2017, vol. 113, pp. 185–188.
Ramezanzadeh, B., Rostami, M., and Niroumandrad, S., Prog. Org. Coat, 2017, vol. 112, pp. 244–253.
Lickiss, P. D. and Rataboul, F., Adv. Organomet Chem., 2008, vol. 57, pp. 1–116.
Applications of Polyhedral Oligomeric Silsesquioxanes, Hartmann-Thompson, C., Ed., New York: Springer Science + Business Media, 2011.
Cordes, D. B., Lickiss, P. D., and Rataboul, R., Chem. Rev., 2010, vol. 110, no. 4, pp. 2081–2173.
Grunlan, M. A., Lee, N. S., Mansfeld, R., Kus, E., Finlay, J. A., Callow, J. A., Callow, M. E., and Weber, W. P., J. Polym. Sci., Part A: Polym. Chem., 2006, vol. 44, no. 8, pp. 2551–2566.
Liu, Y., Zheng, S., and Nie, K., Polymer, 2005, vol. 46, no. 25, pp. 12016–12025.
Huang, J.-M., Huang, H.-J., Wang, Y.-X., Chen, W.-Y., and Chang, F.-C., J. Polym. Sci., Part B: Polym. Phys., 2009, vol. 47, no. 19, pp. 1927–1934.
Xiao, F., Sun, Y., Xiu, Y., and Wong, C. R., J. Appl. Polym. Sci., 2007, vol. 104, no. 4, pp. 2113–2121.
Mya, K. Y., He, Ch., Huang, J., Xiao, Y., Dai, J., and Siow, Y.-R., J. Polym. Sci., Part A: Polym. Chem., 2004, vol. 42, no. 14, pp. 3490–3503.
Choi, J., Harcup, J., Yee, A. F., Zhu, Q., and Laine, R. M., J. Am. Chem. Soc, 2001, vol. 123, no. 46, pp. 11420–11430.
Choi, J., Kim, S. G., and Laine, R. M., Macromolecules, 2004, vol. 37, no. 1, pp. 99–109.
Chen, Sh., Gao, J., Han, H., and Wang, Ch., Iran. Polym. J., 2014, vol. 23, no. 8, pp. 609–617.
Dias Filho, N. L., de Aquino, H. A., Pires, G., and Caetano, L., J. Braz. Chem. Soc, 2006, vol. 17, no. 3, pp. 533–541.
Dias Filho, N. L., de Aquino, H. A., Pereira, D. S., and Rosa, A. H., J. Appl. Polym. Sci., 2007, vol. 106, no. 1, pp. 205–213.
Florea, N. M., Lungu, A., Badica, P., Craciun, L., Enculescu, M., Ghita, D. G., Ionescu, C., Zgirian, R. G., and Iovu, H., Composites, PartB, 2015, vol. 75, pp. 226–234.
Dias Filho, N. L., Cardoso, C. X., and de Aquino, H. A., J. Braz. Chem. Soc, 2006, vol. 17, no. 5, pp. 935–943.
Choi, J., Yee, A. F., and Laine, R. M., Macromolecules, 2003, vol. 36, no. 15, pp. 5666–5682.
Sogukkanli, S., Yilmazoglu, M., Tasdelen, M. A., and Erciyes, A. T., Prog. Org. Coat., 2018, vol. 124, pp. 175–184.
Zucchi, I. A., Galante, M. J., Williams, R. J., Franchini, E., Galy, J., and Gerard, J.-F., Macromolecules, 2007, vol. 40, no. 4, pp. 1274–1282.
Li, Q., Hutcheson, S. A., McKenna, G. B., and Simon, S. L., J. Polym. Sci., PartB: Polym. Phys., 2008, vol. 46, no. 24, pp. 2719–2732.
Strachota, A., Whelan, P., Kriz, J., Bras, J., Urbanova, M., Slouf, M., and Matejka, L., Polymer, 2007, vol. 48, no. 11, pp. 3041–3058.
Ramirez, C., Abad, M. J., Barral, L., Cano, J., Diez, F. J., Lopez, J., Montes, R., and Polo, J., J. Therm. Anal. Calorim., 2003, vol. 72, no. 2, pp. 421–429.
Ramirez, C., Vilarino, J.M.L., Abad, M. J., Barral, L., Bouza, R., Cano, J., Diez, F. J., Garcia-Garabal, S., and Lopez, J., J. Appl. Polym. Sci., 2004, vol. 92, no. 3, pp. 1576–1583.
Strachota, A., Kroutilova, I., Kovarova, J., and Matejka, L., Macromolecules, 2004, vol. 37, no. 25, pp. 9457–9464.
Matejka, L., Strachota, A., Plestil, J., Whelan, P., Steinhart, M., and Slouf, M., Macromolecules, 2004, vol. 37, no. 25, pp. 9449–9456.
Choi, J., Harcup, J., Yee, A.F., Zhu, Q., and Laine, R. M., J. Am. Chem. Soc, 2001, vol. 123, no. 46, pp. 11420–11430.
Kumar, S. A. and Sasikumar, A., Prog. Org. Coat., 2010, vol. 68, no. 3, pp. 189–200.
Sethuraman, K., Prabunathan, P., and Alagar, M., RSC Adv., 2014, vol. 4, no. 85, pp. 45433–45441.
Cao, I., Fan, H., Li, B.-G., and Zhu, Sh., Polymer, 2017, vol. 124, pp. 157–167.
Wang, L., Zhang, Ch., and Zheng, S., J. Mater. Chem., 2011, vol. 21, pp. 19344–19352.
Kavanagh, C. J., Swain, G. W., Kovach, B. S., Stein, J., Darkangelo-Wood, C., Traby, K., Holm, E., Montemarano, J., Meyer, A., and Wiebe, D., Biofouling, 2003, vol. 19, no. 6, pp. 381–390.
Traby, K., Wood, C., Stein, J., Cella, J., Carpenter, J., Kavanagh C., Swain, G., Wiebe, D., Lapota, D., Meyer, A., Holm, E., Wendt, D., Smith, C., and Montemarano, J., Biofouling, 2000, vol. 15, nos. 1–3, pp. 141–150.
Hoipkemeier- Wilson, L., Schumacher, J. F., Carman, M. L., Gibson, A. L., Feinberg, A. W., Callow, M. E., Finlay, J. A., Callow, J. A., and Brennan, A. B., Biofouling, 2004, vol. 20, no. 1, pp. 53–63.
Ba, M., Zhang, Zh., and Qi, Y., Coatings, 2018, vol. 8, no. 5, pp. 153–164.
Shivapooja, Ph., Cao, Ch., Orihuela, B., Levering, V., Zhao, X., Rittschof, D., and Lopez, G. P., Biofouling, 2016, vol. 32, no. 9, pp. 1017–1028.
Rittschof, D., Orihuela, B., Harder, T., Stafslien, Sh., Chisholm, B., and Dickinson, G. H., PLoS ONE, 2011, vol. 6, no. 2, pp. 1–12.
Galhenage, T. P., Hoffman, D., Silbert, S. D., Stafslien, Sh. J., Daniels, J., Miljkovic, T., Finlay, J. A., Franco, S. C., Clare, A. S., Nedved, B. T., Hadfield, M. G., Wendt, D. E., Waltz, G., Brewer, L., Teo, S.L.M., Lim, Ch-S., and Webster, D. C., ACS Appl. Mater. Interfaces, 2016, vol. 8, no. 42, pp. 29025–29036.
Patent US 20100183886, Publ. 2010.
Xiao, L., Li, J., Mieszkin, S., Di Fino, A., Clare, A.S, Callow, M. E., Callow, J. A., Grunze, M., Rosenhahn, A., and Levkin, P. A., ACS Appl. Mater. Interfaces, 2013, vol. 5, no. 20, pp. 10074–10080.
Patent NL WO/2002/074870, Publ. 2002.
Patent US WO/2000/014166, Publ. 2000.
Stein, J., Truby, K., Wood, C. D., Stein, J., Gardner, M., Swain, G., Kavanagh, C., Kovach, B., Schultz, M., Wiebe, D., Holm, E., Montemarano, J., Wendt, D., Smith C., and Meyer, A., Biofouling, 2003, vol. 19, no. 1, pp. 71–82.
Edwards, D. P., Nevell, T. G., Plunkett, B. A., and Ochiltree, B. C., Int. Biodeterior. Biodegrad., 1994, vol. 34, pp. 349–359.
Patent US EP0563939, Publ. 1993.
Patent US 20100272910, Publ. 2010.
Chrusciel, J. J. and Lesniak, E., Prog. Polym. Sci., 2015, vol. 41, pp. 67–121.
Author information
Authors and Affiliations
Corresponding author
Additional information
Russian Text © The Author(s), 2019, published in Zhurnal Prikladnoi Khimii, 2019, Vol. 92, No. 4, pp. 491−503.
Rights and permissions
About this article
Cite this article
Il’ina, M.A., Mashlyakovskii, L.N., Drinberg, A.S. et al. Silicon-Containing Epoxy Composites and Their Use in Marine Coatings Technology. Russ J Appl Chem 92, 530–542 (2019). https://doi.org/10.1134/S1070427219040098
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427219040098