Abstract
This paper deals with investigating brittle fracture in V-notches with end holes under mode I loading. Thirty-six fracture test results, reported most recently in the literature on a new notched disk-type specimen, namely the Brazilian disk containing central VO-shaped notch made of polymethyl-metacrylate, were theoretically predicted by means of the well-known brittle fracture criterion, namely the strain energy density over a critical control volume which embraces the notch edge. A very good agreement was shown to exist between the experimental and theoretical results.
Similar content being viewed by others
References
Gogotsi, G.A., Fracture Toughness of Ceramics and Ceramic Composites, Ceram. Int., 2003, vol. 29, pp. 777–784.
Knesl, Z., A Criterion of V-Notch Stability, Int. J. Fract., 1991, vol. 48, pp. R79–R83.
Nui, L.S., Chehimi, C., and Pluvinage, G., Stress Field near a Large Blunted Tip V-Notch and Application of the Concept of the Critical Notch Stress Intensity Factor (NSIF) to the Fracture Toughness of Very Brittle Materials, Eng. Fract. Mech., 1994, vol. 49, pp. 325–335.
Seweryn, A., Brittle Fracture Criterion for Structures with Sharp Notches, Eng. Fract. Mech., 1994, vol. 47, pp. 673–681.
Carpinteri, A., Cornetti, P., Pugno, N., Sapora, A., and Taylor, D., Generalized Fracture Toughness for Specimens with Re-entrant Corners: Experiments vs. Theoretical Predictions, Struct. Eng. Mech., 2009, vol. 32, pp. 609–620.
Strandberg, M., Fracture at V-Notches with Contained Plasticity, Eng. Fract. Mech., 2002, vol. 69, pp. 403–415.
Leguillon, D., A Criterion for Crack Nucleation at a Notch in Homogeneous Materials, Comptes Rendus l’ Acadèmie Des Sci. Ser. IIB. Mech., 2001, vol. 329, pp. 97–102.
Leguillon, D., Strength or Toughness? A Criterion for Crack Onset at a Notch, Eur. J. Mech. A. Solids, 2002, vol. 21, pp. 61–72.
Gomez, F.J., Elices, M., and Valiente, A., Cracking in PMMA Containing U-Shaped Notches, Fatigue Fract. Eng. Mater. Struct., 2000, vol. 23, pp. 795–803.
Gomez, F.J. and Elices, M., A Fracture Criterion for Sharp V-Notched Samples, Int. J. Fract., 2003, vol. 123, pp. 163–175.
Gomez, F.J. and Elices, M., A Fracture Criterion for Blunted V-Notched Samples, Int. J. Fract., 2004, vol. 127, pp. 239–264.
Gomez, F.J., Elices, M., and Planas, J., The Cohesive Crack Concept: Application to PMMA at -60°C, Eng. Fract. Mech., 2005, vol. 72, pp. 1268–1285.
Sih, G.C., Strain-Energy-Density Factor Applied to Mixed Mode Crack Problems, Int. J. Fract., 1974, vol. 10, pp. 305–321.
Lazzarin, P. and Zambardi, R., A Finite-Volume-Energy Based Approach to Predict the Static and Fatigue Behavior of Components with Sharp V-Shaped Notches, Int. J. Fract., 2001, vol. 112, pp. 275–298.
Berto, F. and Lazzarin, P., A Review ofthe Volume-Based Strain Energy Density Approach Applied to V-Notches and Welded Structures, Theor. Appl. Fract. Mech., 2009, vol. 52, pp. 183–194.
Berto, F., Cendon, D.A.A., Lazzarin, P., and Elices, M., Fracture Behaviour of Notched Round Bars Made of PMMA Subjected to Torsion at -60°C, Eng. Fract. Mech., 2013, vol. 102, pp. 271–287.
Salavati, H., Alizadeh, Y., and Berto, F., Effect of Notch Depth and Radius on the Critical Fracture Load of Bainitic Functionally Graded Steels under Mixed Mode I + II Loading, Phys. Mesomech., 2014, vol. 17, no. 3, pp. 178-189.
Torabi, A.R., Campagnolo, A., and Berto, F., Local Strain Energy Density to Predict Mode IIBrittle Fracture in Brazilian Disk Specimens Weakened by V-Notches with End Holes, Mater. Des., 2015, vol. 69, pp. 22-29.
Torabi, A.R., Campagnolo, A., and Berto, F., Mode IIBrittle Fracture Assessment of Key-Hole Notches by Means of the Local Energy, J. Test Eval., 2016, vol. 44, doi:10.1520/JTE20140295.
Berto, F., Campagnolo, A., and Lazzarin, P., Fatigue Strength of Severely Notched Specimens Made of Ti-6Al-4V under Multiaxial Loading, Fatigue Fract. Eng. Mater. Struct., 2015, vol. 38, no. 5, pp. 503–517.
Berto, F., Lazzarin, P., and Marangon, C., Fatigue Strength of Notched Specimens Made of 40CrMoV13.9 under Multiaxial Loading, Mater. Des., 2014, vol. 54, pp. 57–66.
Leguillon, D. and Yosibash, Z., Crack Onset at a V-Notch. Influence of the Notch Tip Radius, Int. J. Fract., 2003, vol. 122, pp. 1–21.
Yosibash, Z., Bussiba, A., and Gilad, I., Failure Criteria for Brittle Elastic Materials, Int. J. Fract., 2004., pp. 307–233.
Torabi, A.R. and Berto, F., Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density, Strength Mater., 2013, vol. 45, pp. 635–647.
Torabi, A. and Berto, F., Strain Energy Density to Assess Mode IIFracture in U-Notched Disk-Type Graphite Plates, Int. J. Damage Mech., 2014, vol. 23, pp. 917–930.
Torabi, A.R. and Berto, F., Mixed Mode Fracture Assessment of U-Notched Graphite Brazilian Disk Specimens by Means of the Local Energy, Struct. Eng. Mech., 2014, vol. 50, pp. 723–740.
Livieri, P., A New Path Independent Integral Applied to Notched Components under Mode I Loadings, Int. J. Fract., 2003, vol. 123, pp. 107–125.
Matvienko, Yu.G. and Morozov, E.M., Calculation of the Energy J-Integral for bodies with Notches End, Int. J. Fract., 2004, vol. 125, pp. 249–261.
Livieri, P., Use of J-Integral to Predict Static Failures in Sharp V-Notches and Rounded U-Notches, Eng. Fract. Mech., 2008, vol. 75, pp. 1779–1793.
Barati, E. and Alizadeh, Y., A Numerical Method for Evaluation of J-Integral in Plates Made of Functionally Graded Materials with Sharp and Blunt V-Notches, Fatigue Fract. Eng. Mater. Struct., 2011, vol. 34, pp. 1041–1052.
Becker, T.H., Mostafavi, M., Tait, R.B., and Marrow, T.J., An Approach to Calculate the J-Integral by Digital Image Correlation Displacement Field Measurement, Fatigue Fract. Eng. Mater. Struct., 2012, vol. 35, pp. 971–984.
Barati, E. and Berto, F., A Comparison between Rapid Expressions for Evaluation of the Critical J-Integral in Plates with U-Notches under Mode I Loading, J. Strain Anal. Eng. Des., 2011, vol. 46, pp. 852–865.
Noori-Azghad, F., Khademizadeh, H., and Barati, E., Some Analytical and Numerical Expressions for Evaluation of the Critical J-Integral in Plates with Blunt VNotches under Mode I Loading, J. Strain Anal. Eng. Des., 2013, vol. 49, pp. 352–360.
Carpinteri, A., Cornetti, P., Pugno, N., Sapora, A., and Taylor, D., A Finite Fracture Mechanics Approach to Structures with Sharp V-Notches, Eng. Fract. Mech., 2008, vol. 75, pp. 1736–1752.
El Minor, H., Kifani, A., Louah, M., Azari, Z., and Pluvinage, G., Fracture Toughness of High Strength Steel—Using the Notch Stress Intensity Factor and Volumetric Approach, Struct. Saf., 2003, vol. 25, pp. 35–45.
Ayatollahi, M.R. and Torabi, A.R., Brittle Fracture in Rounded-Tip V-Shaped Notches, Mater. Des., 2010, vol. 31, pp. 60–67.
Ayatollahi, M.R.R. and Torabi, A.R.R., Tensile Fracture in Notched Polycrystalline Graphite Specimens, Carbon, 2010, vol. 48, pp. 2255–2265.
Torabi, A.R., Fakoor, M., and Pirhadi, E., Tensile Fracture in Coarse-Grained Polycrystalline Graphite Weakened by a U-Shaped Notch, Eng. Fract. Mech., 2013, vol. 111, pp. 77–85.
Berto, F. and Zappalorto, M., The Fictitious Notch Rounding Approach Applied to V-Notches with Root Holes Subjected to Mode I Loading, J. Strain Anal. Eng. Des., 2012, vol. 47, pp. 176–186.
Torabi, A. and Amininejad, S., Brittle Fracture in V-Notches with End Holes, Int. J. Damage Mech., 2014, doi:10.1177/1056789514538293.
Torabi, A.R., Closed-Form Expressions of Mode I Apparent Notch Fracture Toughness for Key-Hole Notches, J. Strain Anal. Eng. Des., 2014, doi:10.1177/03093247145- 41882.
Torabi, A.R. and Abedinasab, S.M., Fracture Study on Key-Hole Notches Under Tension: Two Brittle Fracture Criteria and Notch Fracture Toughness Measurement by the Disk Test, Exp. Mech., 2014, doi:10.1007/s11340-014-9949-0.
Lazzarin, P., Berto, F., and Ayatollahi, M.R., Brittle Failure of Inclined Key-Hole Notches in Isostatic Graphite under In-Plane Mixed Mode Loading, Fatigue Fract. Eng. Mater. Struct., 2013, vol. 36, pp. 942–955.
Sistaninia, M., Ayatollahi, M.R., and Sistaninia, M., On Fracture Analysis of Cracked Graphite Components under Mixed Mode Loading, Mech. Adv. Mater. Struct., 2014, vol. 21, pp. 781–791.
Ayatollahi, M.R., Torabi, A.R.R., and Azizi, P., Experimental and Theoretical Assessment of Brittle Fracture in Engineering Components Containing a Sharp V-Notch, Exp. Mech., 2010, vol. 51, pp. 919–932.
Negru, R., Marsavina, L., Filipescu, H., and Pasca, N., Investigation of Mixed Mode I/II Brittle Fracture Using ASCB Specimen, Int. J. Fract., 2013, vol. 181, pp. 155–161.
Brighenti, R. and Carpinteri, A., Buckling and Fracture Behaviour of Cracked Thin Plates under Shear Loading, Mater. Des., 2011, vol. 32, pp. 1347–1355.
Carpinteri, A., Ronchei, C., and Vantadori, S., Stress Intensity Factors and Fatigue Growth of Surface Cracks in Notched Shells and Round Bars: Two Decades of Research Work, Fatigue Fract. Eng. Mater. Struct., 2013, vol. 36, pp.1164–1177.
Brighenti, R. and Carpinteri, A., Surface Cracks in Fatigued Structural Components: A Review, Fatigue Fract. Eng. Mater. Struct., 2013, vol. 36, pp. 1209–1222.
Brighenti, R., Carpinteri, A., and Spagnoli, A., Influence of Material Microvoids and Heterogeneities on Fatigue Crack Propagation, Acta Mech., 2014, doi:10.1007/s00707-014-1111-7.
Brighenti, R. and Carpinteri, A., Some Considerations on Failure of Solids and Liquids, Strength Mater., 2010, vol. 42, pp. 154–166.
Brighenti, R. and Carpinteri, A., A Notch Multiaxial-Fatigue Approach Based on Damage Mechanics, Int. J. Fatigue, 2012, vol. 39, pp. 122–133.
Brighenti, R., Carpinteri, A., and Vantadori, S., Fatigue Life Assessment under a Complex Multiaxial Load History: An Approach Based on Damage Mechanics, Fatigue Fract. Eng. Mater. Struct., 2012, vol. 35, pp. 141–153.
Berto, F. and Lazzarin, P., Recent Developments in Brittle and Quasi-Brittle Failure Assessment of Engineering Materials by Means of Local Approaches, Mater. Sci. Eng. R. Rep., 2014, vol. 75, pp. 1–48.
Lazzarin, P., Campagnolo, A., and Berto, F., A Comparison among Some Recent Energy- and Stress-Based Criteria for the Fracture Assessment of Sharp V-Notched Components under Mode I Loading, Theor Appl. Fract. Mech., 2014, vol. 71, pp. 21–30.
Lazzarin, P., Berto, F., and Zappalorto, M., Rapid Calculations of Notch Stress Intensity Factors Based on Averaged Strain Energy Density from Coarse Meshes: Theoretical Bases and Applications, Int. J. Fatigue, 2010, vol. 32, pp. 1559–1567.
Pook, L.P., Berto, F., Campagnolo, A., and Lazzarin, P., Coupled Fracture Mode of a Cracked Disc under Anti-Plane Loading, Eng. Fract. Mech., 2014, vol. 128, pp. 22–36.
Berto, F., A Review on Coupled Modes in V-Notched Plates of Finite Thickness: A Generalized Approach to the Problem, Phys. Mesomech., 2013, vol. 16, no. 4, pp. 378–390.
Pook, L.P., Campagnolo, A., Berto, F., and Lazzarin, P., Coupled Fracture Mode of a Cracked Plate under AntiPlane Loading, Eng. Fract. Mech., 2015, vol. 134, pp. 391–403.
Campagnolo, A., Berto, F., and Lazzarin, P., The Effects of Different Boundary Conditions on Three-Dimensional Cracked Discs under Anti-Plane Loading, Eur. J. Mech. A. Solids, 2015, vol. 50, pp. 76–86.
Berto, F., Lazzarin, P., and Marangon, Ch., The Effect of the Boundary Conditions on In-Plane and Out-of-Plane Stress Field in Three Dimensional Plates Weakened by Free-Clamped V-Notches, Phys. Mesomech., 2012, vol. 15, no. 1-2, pp. 26–36.
Kotousov, A., Fracture in Plates of Finite Thickness, Int. J. Solids Struct., 2007, vol. 44, pp. 8259–8273.
Kotousov, A., On Stress Singularities at Angular Corners of Plates of Arbitrary Thickness under Tension, Int. J. Fract., 2005, vol. 132, pp. 29–36.
Pook, L.P., A 50 Year Retrospective Review of Three-Dimensional Effects at Cracks and Sharp Notches, Fatigue Fract. Eng. Mater. Struct., 2013, vol. 36, pp. 699–723.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Text © A.R. Torabi, A. Campagnolo, F. Berto, 2015, published in Fizicheskaya Mezomekhanika, 2015, Vol. 18, No. 2, pp. 5-12.
Rights and permissions
About this article
Cite this article
Torabi, A.R., Campagnolo, A. & Berto, F. Tensile fracture analysis of V-notches with end holes by means of the local energy. Phys Mesomech 18, 194–202 (2015). https://doi.org/10.1134/S1029959915030030
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1029959915030030