Abstract
In the present paper, results of numerical simulation of single-phase flows of heat carrier through square and triangular rod bundles are reported. The simulations were aimed at the determination of parameters involved in an integral model of turbulence being developed for modeling nuclear-reactor cores and heat exchangers in anisotropic porous-body approximation.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
F.M. Mitenkov, V.F. Golovko, P.A. Ushakov, and Yu.S. Yuriev, Design of Heat-Exchanging Apparatus for Nuclear Power Plants, Energoatomizdat, Moscow, 1988.
V.I. Subbotin, V.M. Kashcheev, E.V. Nomofilov, and Yu.S. Yuriev, Solution of Reactor-Thermophysics Problems Using Computers, Atomizdat, Moscow, 1979.
A.S. Korsun and S.V. Vikulova, Determination of anisotropic porous body resistance, in: Proc. Second National Conference on Heat Transfer, in eight volumes, Moscow Power Engineering Institute, Moscow, 1998, Vol. 5. P. 215–218.
A.S. Korsun, Effective thermal conductivity of porous structures formed by rod or tube bundles, in: Heat and Mass Transfer MIF 4, Proc._IV Minsk International Forum, Minsk, 2000, Vol 10, P. 242–250.
A.S. Korsun, V.B. Kruglov, Yu.A. Maslov, I.G. Merinov, A.A. Odintsov, V.S. Kharitonov, I.N. Vasil’chenko, S.N. Kobelev, and D.V. Mal’chevskii, Numerical study of heat-carrier circulation in fuel assemblies with intermixing lattices, Voprosy Atomnoi Nauki i Tekhniki, ser. Accident prevention at nuclear power plants, 2008, Iss. 23, P. 97–102.
N.N. Davidenko, Yu.A. Maslov, A.S. Korsun, I.G. Merinov, V.S. Kharitinov, and B.E. Shumskii, Simulation of 3D thermohydraulic processes in water-moderated reactor core using the TRETON program complex, Izv. VUZov, ser. Nuclear power engineering, 2009, Iss. 3, P. 139–151.
M.H.J. Pedras and M.J.S. de Lemos, Computation of turbulent flow in porous media using a low-Reynolds model and an infinite array of transversally displaced elliptic rods, Numerical Heat Transfer, 2003, Part A, Vol. 43, P. 585–602.
M.J.S. de Lemos, Turbulence in Porous Media: Modeling and Applications, Elsevier, 2006.
V.I. Subbotin, V.V. Kharitonov, A.A. Plakseev, and S.V. Alekseev, Inter-channel transfer of heat in transverse water flow through a tube bundle, Teploenergetika, 1985, No. 1, P. 42–44.
A.S. Korsun and V.A. Ponomarev, Effective stress tensor in rod-or tube-bundle flows, Thermal and hydraulic safety aspects of water-or liquid-metal-cooled reactor cores, in: Proc. Scientific-Engineering Conference «Thermophysics 2008», 2009, P. 550–565.
A.S. Korsun, Effective thermal conductivity of porous structures formed by rod or tube bundles, in: Heat and Mass Transfer MIF 4, Proc._IV Minsk International Forum, Minsk, 2000, Vol 10, P. 242–250.
P.L. Kirillov, V.P. Bobkov, A.V. Zhukov, and Yu.S. Yuriev, Reference Book on Thermal-Hydraulic Calculations in Nuclear Engineering, Vol. 1. Thermohydraulic processes in power reactor facilities, edited by P.L. Kirillov, IzdAT, Moscow, 2010.
A.V. Zhukov, A.P. Sorokin, and N.M. Matyukhin, Inter-Channel Transfer of Heat in Fast-Reactor Fuel Assemblies, Energoatomizdat, Moscow, 1989.
A.V. Zhukov, Thermal-Hydraulic Design of Reactors. Part 1, General Aspects, RF SSC IPPE, Obninsk, 2001.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Vlasov, M.N., Korsun, A.S., Maslov, Y.A. et al. Determination of integral turbulence model parameters as applied to calculation of rod-bundle flows in porous-body approximation. Thermophys. Aeromech. 23, 201–209 (2016). https://doi.org/10.1134/S0869864316020062
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0869864316020062