Abstract
Measured data on the filtration velocity of air in highly porous cellular materials under conditions of high filtration velocities and reduced air densities are reported. The viscosity and inertia coefficients entering the quadratic dependence of pressure gradient as a function of filtration velocity in porous materials for various flow conditions in the pores are evaluated.
Similar content being viewed by others
References
N. Chokani, D.A. Bountin, A.N. Shiplyuk, and A.A. Maslov, Nonlinear aspects of hypersonic boundary-layer stability on a porous surface, AIAA J., 2005, Vol. 43, No. 1, P. 149–155.
A. Fedorov, V. Kozlov, A. Shiplyuk, A. Maslov, and N. Malmuth, Stability of hypersonic boundary layer on porous wall with regular microstructure, AIAA J., 2006, Vol. 44, No. 8, P. 1866–1871.
A.A. Maslov, S.G. Mironov, T.V. Poplavskaya, I.S. Tsyryulnikov, and S.V. Kirilovskiy, Effect of soundabsorbing materials on the intensity of disturbances in the shock layer of a flat plate aligned at an angle of attack, J. Appl. Mech. Tech. Physics, 2012, Vol. 53, No. 2, P. 162–172.
V.M. Fomin, S.G. Mironov, and K.M. Serdyuk, Reducing the wave drag of bodies in supersonic flow using porous materials, Tech. Physics Letters, 2009, Vol. 35, Iss. 3, P. 17–19.
V.M. Fomin, V.I. Zapryagaev, A.V. Lokotko, and V.F. Volkov, Effect of gas-permeable surface areas on aerodynamic characteristics of a body of rotation at supersonic velocities, Doklady Physics, 2009, Vol. 54, No. 8, P. 384–388
V.M. Fomin, V.I. Zapryagaev, A.V. Lokotko, V.F. Volkov, A.E. Lutskii, I.S. Men’shov, and Yu.M. Maksimov, Aerodynamic characteristics of a body of revolution with gas-permeable surface areas, J. Appl. Mech. Tech. Phys., 2010, Vol. 51, No. 1, P. 65–73.
S.G. Mironov, I.S. Tsyryul’nikov, and A.A. Maslov, Controlling aerodynamic forces with the aid of gaspermeable porous materials, Tech. Phys. Letters, 2014, Vol. 40, Iss. 19, P. 868–870.
I.A. Bedarev, S.G. Mironov, K.M. Serdyuk, A.V. Fedorov, and V.M. Fomin, Physical and mathematical modeling of supersonic flow of a cylinder with a porous insert, J. Appl. Mech. Tech. Phys., 2011, Vol. 52, No. 1, P. 10–17.
S.V. Kirilovskiy, S.G. Mironov, and T.V. Poplavskaya, Numerical modeling of the flow around a cylinder with a gas-permeable porous insert in front, Abstracts 17th Int. Conf. on the Methods of Aerophysical Research, Part II. Novosibirsk, Avtograf, 2014, P. 95–96.
Yu.F. Gortyshov, G.B. Murav’ev, and I.N. Nadyrov, Experimental study of flow and heat exchange in highly porous structures, J. Engng Phys., 1987, Vol. 53, No. 3, P. 987–990.
Yu.F. Gortyshov, I.N. Nadyrov, S.R. Ashimkhin, and A.P. Kunevich, Heat transfer in the flow of a singlephase and boiling coolant in a channel with a porous insert, J. Engng Phys., 1991, Vol. 60, No. 2, P. 202–207.
A.M. Beklemyshev, Structural and Hydraulic Properties of Metal-Based Highly Porous Cellular Materials, Perm State Technical University, Perm, 1998.
Yu.A. Kirsanov, R.A. Nazipov, and V.A. Danilov, Heat transfer between a porous body and a single-phase flow of the heat carrier, High Temp., 2011, Vol. 49, No. 2, P. 227–234.
Porous Permeable Materials: a Reference Book, S.V. Belov, Metallurgiya, Moscow, 1987.
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was financially supported by the Russian Foundation for Basic Research (Grants Nos. 012-08-00457 and 015-08-03867) and by Government of the Russian Federation (grant for supporting studies under the supervision of leading scientists (Contract No. 14Z50.31.0019).
Rights and permissions
About this article
Cite this article
Mironov, S.G., Kolotilov, V.A. & Maslov, A.A. An experimental study of filtration characteristics of highly porous cellular materials. Thermophys. Aeromech. 22, 575–583 (2015). https://doi.org/10.1134/S0869864315050066
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0869864315050066