Abstract
The effect of magnetic-pulse fields on the surface porosity, the microhardness, the brittleness, and the structure of a precision sendust alloy is studied. A reduction in the open surface porosity indices and the brittleness and an increase in the microhardness of the sendust alloy are revealed. The influence of magnetic pulses on the crystal structure of sendust is shown.
Similar content being viewed by others
References
A. A. Griffith, “The phenomena of rupture and flow in solids,” Philos. Trans. Roy. Soc. London. Ser A. 221, 163–198 (1921).
A. F. Ioffe, M. V. Kirpicheva, and M. A. Levitinskaya, Zh. Russ. Fiz. Khim. Obshchestva, No. 56, 429 (1924).
A. P. Aleksandrov and S. N. Zhurkov, Brittle Fracture Phenomenon (Gos. Tech. Theor. Izd., Leningrad-Moscow, 1993).
F. F. Vitman, A. V. Bernshtein, and V. P. Pukh, Glass Strength, Ed. by V. A. Stepanova (Mir, Moscow, 1969).
F. De Kazinczy, “Effect of small defects on the fatigue properties of medium-strength cast steel,” J. Iron Steel Inst., London, 851–856 (1970).
P. G. Cheremskoi, V. V. Slezov, and V. I. Betekhtin, Pores within a Solid, (Energoatomizdat, Moscow, 1990).
V. I. Betekhtin, “Effect of microscopic pores and cracks on the mechanical properties of metallic materials,” Metalloved. Term. Obrab. Met., No. 1(691), 51–55 (2013).
V. I. Betekhtin, V. I. Vladimirov, A. G. Kadomtsev, and A. I. Petrov, Poverkhnost Fiz. Khim. Mekhan. No. 7, 144–151 (1984).
V. I. Betekhtin, S. Yu. Veselkov, Yu. M. Dal’, A. G. Kadomtsev, and O. V. Amosova, “Theoretical and experimental investigation of internal load effect on pores in solids,” Fiz. Tverd. Tela 45 (4), 618–624 (2003).
N. V. Kurlaev, A. I. Gulidov, and N. A. Ryngach, “Theoretical and experimental studies of the magneticpulsed processing on structural defects in metals,” in Transactions of Novosibirsk State Techn. Univ. (Novosibirsk, 2004), Vol. 4(38), pp. 65–74).
M. A. Khudyakov and R. R. Altynova, “Effect of constant magnetic field on cyclic crack resistance and corrosion resistance,” Neftegazov. Delo 4 (2), 99–107 (2006).
B. V. Malygin, Magnetic Strengthening of Tools and Machine Parts (Mashinostroenie, Moscow, 1989).
M. L. Bernshtein and V. N. Pustovoit, Heat Treatment of Steel Products in a Magnetic Field (Mashinostroenie, Moscow, 1987).
Yu. M. Baron, Magnetic-Abrasive and Magnetic Treatment of Products and Cutting Tools (Mashinostroenie, Leningrad, 1977).
A. V. Komshina, A. S. Pomel’nikova, M. N. Shipko, and V. V. Korovushkin, “Effect of magnetic-pulse treatment on Sendast and titanium alloy VT23 surface porosity,” Tekhnol. Met., No. 1, 22–29 (2013).
E. S. Ventsel’, Probability Theory (Nauka, Moscow, 1969).
Yu. I. Golovin, “Magnetoplasticity of solids,” Fiz. Tverd. Tela, 46 (5) 769–803 (2004).
V. S. Litvinov, S. D. Karakishev, and V. V. Ovchinnikov, Mössbauer Spectroscopy of Alloys (Metallurgiya, Moscow, 1982).
M. N. Shipko, M. A. Stepovich, B. A. Staroverov, and V. Kh. Kostyuk, “Influence of weak low-frequency pulsed fields on the physical and mechanical properties of metals and precision alloys,” Promyshl. ASU Kontrollery, No. 1, 2–6 (2012).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Komshina, A.S. Pomel’nikova, M.N. Shipko, V.V. Korovushkin, 2014, published in Tekhnologiya Metallov, 2014, No. 1, pp. 15–22.
Rights and permissions
About this article
Cite this article
Komshina, A.V., Pomel’nikova, A.S., Shipko, M.N. et al. Effect of magnetic-pulse treatment on the surface defects, the properties, and the structure of sendust alloy. Russ. Metall. 2015, 1103–1109 (2015). https://doi.org/10.1134/S0036029515130091
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029515130091