Abstract
The results of structural studies and mechanical, abrasion, and erosion tests of single-layer and multi-layer TiN, Ti–Cr–Al–N, and Cr–Al–Ti–N coatings deposited on a closed-field unbalanced magnetron sputtering (CFUBMS) system using the ion-plasma technique are reported. It is demonstrated that, despite their low level of hardness (17–18 GPa versus 40 GPa for TiN), Ti–Cr–Al–N and Cr–Al–Ti–N coatings are superior to single-layer titanium nitride coatings in terms of their abrasive wear resistance and erosion resistance due to their structural features.
Similar content being viewed by others
REFERENCES
Rajendran, R., Eng. Failure Anal., 2012, vol. 26, pp. 355–369.
Carter, T.J., Eng. Failure Anal., 2005, vol. 12, pp. 237–247.
Bousser, E., et al., Surf. Coat. Technol., 2013, vol. 235, pp. 383–393.
Feuerstein, A. and Kleyman, A., Surf. Coat. Technol., 2009, vol. 204, pp. 1092–1096.
Reedy, M.W., et al., Surf. Coat. Technol., 2011, vol. 206, pp. 464–472.
Hassani, S., et al., Wear, 2008, vol. 265, pp. 879–887.
Jianxin, D., et al., Int. J. Refract. Met. Hard Mater., 2012, vol. 35, p. 10.
Yang, Q., et al., Surf. Coat. Technol., 2004, vols. 188–189, pp. 168–173.
Bousser, E., et al., Surf. Coat. Technol., 2013, vol. 235, pp. 383–393.
Bonu, V., et al., Surf. Coat. Technol., 2019, vol. 357, pp. 204–211.
Cao, X., He, W., Liao, B., Zhou, H., Zhang, H., Tan, C., and Yang, Z., Surf. Coat. Technol., 2018, vol. 365, pp. 214–221. https://doi.org/10.1016/j.surfcoat.2018.08.066
Paternoster, C., et al., Surf. Coat. Technol., 2008, vol. 203, pp. 736–740.
Kiryukhantsev-Korneev, F.V., et al., Phys. Met. Metallogr., 2007, vol. 104, no. 2, pp. 167–174.
Shtansky, D.V., et al., Surf. Coat. Technol., 2008, vol. 202, pp. 5953–5961.
Kiryukhantsev-Korneev, F.V., Russ. J. Non-Ferrous Met., 2014, vol. 55, p. 494.
Pharr, G.M., Oliver, W.C., and Brotzen, F.R., J. Mater. Res., 1992, vol. 3, p. 613.
Levashov, E.A., et al., Russ. Metall. (Engl. Transl.), 2010, vol. 2010, pp. 917–935.
Gee, M.G., et al., Wear, 2003, vol. 255, pp. 1–13.
https://lab-nnz.ru/calowear-2-izmerenie-tolshhiny-i-iznosa-pokrytij-ili-materialov/.
Luo, Q. and Hovsepian, P.Eh., Thin Solid Films, 2006, vol. 497, pp. 203–209.
Hovsepian, P.Eh., et al., Vacuum, 2008, vol. 82, pp. 1312–1317.
Leyland, A. and Matthews, A., Wear, 2000, vol. 246, pp. 1–11.
Levashov, E.A., et al., Mater. Sci. Eng., A, 2013, vol. 570, pp. 51–62.
Lawal, J., et al., Surf. Coat. Technol., 2017, vol. 310, pp. 59–69.
Gee, M.G., et al., Wear, 2005, vol. 259, pp. 27–35.
ACKNOWLEDGMENTS
The authors thank T.B. Sagalova, N.V. Shvyndina, and M.I. Petrzhik for their assistance with the XRD analysis, SEM studies, and nanoindentation measurements
Funding
This work was supported by the Russian Foundation for Basic Research (project no. 19-08-00187).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by D. Terpilovskaya
Rights and permissions
About this article
Cite this article
Kiryukhantsev-Korneev, P.V., Phiri, J., Gladkov, V.I. et al. Erosion and Abrasion Resistance, Mechanical Properties, and Structure of the TiN, Ti–Cr–Al–N and Cr–Al–Ti–N Coatings Deposited by CFUBMS. Prot Met Phys Chem Surf 55, 913–923 (2019). https://doi.org/10.1134/S2070205119050125
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205119050125