Abstract
Fylolflex oligo(resorsinol phenyl phosphate) with terminal phenyl groups is an effective plasticizer for an epoxy polymer, allowing the development of compounds with enhanced levels of physicomechanical properties, heat resistance, softening point, an flame resistance. Introduction of chromite, a cheap and active filler, into the epoxy polymer in amounts of 0.1 and 100 wt parts enhances the physicochemical and mechanical properties of the composite. Namely, the Vicat softening point increases from 132 to 140–250°С, the degradation onset temperature increases, and the yield of carbonized structures increases from 54 to 68–86 wt %, which leads to a decrease in the release of volatile pyrolysis products into the gas phase and in the combustibility of the epoxy composite.
Similar content being viewed by others
References
Kumar, R., Kumar, K., Sahoo, P., and Bhowmik, S., Procedia Mater. Sci., 2014, vol. 6, pp. 551–556.
Radoman, T.S., Dzunuzovic, J.V., Jeremic, K.B., Grgur, B.N., Milicevic, D.S., Popovic, I.G., and Dzunuzovic, E.S., Mater. Des., 2014, vol. 62, pp. 158–167.
Qian, L., Qiu, Y., Sun, N., Xu, M., Xu, G., Xin, F., and Chen, Y., Polym. Degrad. Stab., 2014, vol. 107, pp. 98–105.
Ulegin, S.V., Kadykova, Yu.A., Artemenko, S.E., and Demidova, S.A., Int. Polym. Sci. Technol., 2014, vol. 41, no. 5, pp. 57–60.
Kadykova, Yu.A., Ulegin, S.V., Farkhutdinova, E.G., and Sotnik, V.A., Vestn. Sarat. Gos. Tekh. Univ., 2012, no. 4 (68), pp. 97–99.
Fedoseev, M.S., Derzhavinskaya, L.F., and Tsvetkov, R.V., Perspekt. Mater., 2014, no. 4, pp. 30–36.
Mostovoi, A.S., Plakunova, E.V., and Panova, L.G., Perspekt. Mater., 2014, no. 1, pp. 37–43.
Osipov, P.V., Osipchik, V.S., Smotrova, S.A., and Savel’ev, D.N., Int. Polym. Sci. Technol., 2012, vol. 39, no. 8, pp. T29–T31.
Maisuradze, N.V. and Abdrakhmanova, L.A., Vestn. Tekhnol. Univ., 2015, vol. 18, no. 18, pp. 179–181.
Sadygov, Sh.F., Ishchenko, N.Ya., and Agaeva, S.A., Plast. Massy, 2008, no. 3, pp. 24–26.
Stukhlyak, P.D., Kartashov, V.V., Sorivka, I.T., and Skorokhod, A.Z., Perspekt. Mater., 2013, no. 6, pp. 63–68.
Starokadomskii, D.L., Tkachenko, A.A., and Garashchenko, I.I., Plast. Massy, 2015, nos. 5–6, pp. 50–55.
Plakunova, E.V. and Panova, L.G., Khim. Prom–st., 2013, vol. 90, no. 6, pp. 295–301.
Firsov, V.A., Paramonov, Yu.M., Artemov, V.N., and Lipskaya, V.A., Vysokomol. Soedin., Ser. B, 1982, vol. 24, no. 11, pp. 822–824.
Khozin, V.G., Usilenie epoksidnykh polimerov (Reinforcement of Epoxy Polymers), Kazan: Dom Pechati, 2004.
Burmistrov, I.N., Shatrova, N.V., Mostovoy, A.S., Mazov, I.N., Kuznetsov, D.V., Panova, L.G., Gorokhovsky, A.V., and Yudin, A.G., Polym. Eng. Sci., 2014, vol. 54, no. 12, pp. 2866–2871.
Shirshova, E.S., Tatarintseva, E.A., Plakunova, E.V., and Panova, L.G., Plast. Massy, 2006, no. 12, pp. 34–36.
Eremeeva, N.M., Chadina, V.V., Sveshnikova, E.S., and Panova, L.G., Fundam. Issled., 2015, no. 5, pp. 68–72.
Mostovoi, A.S., Vopr. Materialoved., 2015, no. 4 (84), pp. 117–122.
Mostovoi, A.S., Plakunova, E.V., and Panova, L.G., Dizain. Mater. Tekhnol., 2012, no. 5 (25), pp. 135–137.
Barshtein, R.S., Kirilovich, R.S., and Nosovskii, Yu.E., Plastifikatory dlya polimerov (Plasticizers for Polymers), Moscow: Khimiya, 1982.
Mostovoi, A.S., Perspekt. Mater., 2016, no. 4, pp. 60–66.
Mostovoi, A.S., Panova, L.G., and Kurbatova, E.A., Vopr. Materialoved., 2016, no. 2 (86), pp. 87–95.
Lazarev, A.V., Kaznacheev, S.V., Erofeev, V.T., Khudyakov, V.A., and Kretova, V.M., Izv. Yugo-Zap. Gos. Univ., 2014, no. 1, pp. 94–98.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.S. Mostovoy, A.S. Nurtazina, I.N. Burmistrov, Yu.A. Kadykova, 2018, published in Zhurnal Prikladnoi Khimii, 2018, Vol. 91, No. 11, pp. 1549−1558.
Rights and permissions
About this article
Cite this article
Mostovoy, A.S., Nurtazina, A.S., Burmistrov, I.N. et al. Effect of Finely Dispersed Chromite on the Physicochemical and Mechanical Properties of Modified Epoxy Composites. Russ J Appl Chem 91, 1758–1766 (2018). https://doi.org/10.1134/S1070427218110046
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427218110046