Abstract
The deformational structure and the phase composition of binary and commercial aluminumcopper alloys produced using electroplastic deformation by rolling (EPDR) have been studied. It has been shown that structural transformation in the materials and changes in their hardness in the course of EPDR are governed by the initial state, which determines the distribution and the thermomechanical stability of a dislocation ensemble. It has been found that EPDR causes the dynamic deformation-induced aging of the aluminum-based supersaturated solid solution, which is accompanied by the precipitation of the strengthening θ phase in the Al-Cu alloy and the S phase in the D16 alloy.
Similar content being viewed by others
References
S. K. Kim, E. I. Anisimov, A. V. Drozhzhin, S. A. Kutsenko, and V. A. Martynov, “New equipment for electroplastic rolling of stainless steels,” Vestn. Nauch.-Tekhn. Razv., No. 9, 20–24 (2010).
V. V. Stolyarov, “Effect of electopulsed treatment on the structure and mechanical properties of nanocrystalline TiNi shape-memory alloy,” Pis’ma Mater. 1, 75–77 (2011).
O. A. Troitskii and V. I. Stashenko, “Modernization of the rolling equipment and specific features of the technology of electroplastic rolling,” Mashinostr. Inzh. Obraz., No. 1, 9–16 (2013).
I. Sh. Valeev, N. P. Barykin, V. G. Trifonov, Z. G. Kamalov, and A. Kh. Valeeva, “Effect of high-power current pulses on the structure and mechanical properties of the aluminum alloy AMg6,” Phys. Met. Metallogr. 96, 426–430 (2003).
E. V. Avtokratova, R. R. Il’yasov, I. Sh. Valeev, O. Sh. Sitdikov, and M. V. Markushev, “Structure of the 1570S aluminum alloy after cold rolling and treatment by strong current pulses,” Perspektiv. Mater., No. 15, 44–48 (2013).
V. V. Stolyarov, U. Kh. Ugurchiev, I. B. Trubitsyna, and S. D. Prokoshkin, “Severe electroplastic deformation of TiNi,” Fiz. Tekh. Vys. Davlenii 16, 64–67 (2006).
I. G. Brodova, I. G. Shirinkina, V. V. Astaf’ev, T. I. Yablonskikh, A. A. Potapova, and V. V. Stolyarov, “Effect of pulsed current on structure of Al-Mg-Si aluminum-based alloy during cold deformation,” Phys. Met. Metallogr. 114, 940–946 (2013).
V. V. Stolyarov and I. G. Brodova, “Deformation of an aluminum alloy at a pulsed current impact,” Mashinostr. Inzh. Obraz., No. 2, 39–43 (2013).
S. S. Gorelik, S. V. Dobatkin, and L. M. Kaputkina, Recrystallization of Metals and Alloys (MISiS, Moscow, 2005) [in Russian].
R. D. Doherty and J. W. Martin, “The effect of a dispersed second phase on the recrystallization of aluminium-copper alloys,” J. Inst. Met., No. 3, 332–338 (1962).
L. F. Mondolfo, Aluminum Alloys: Structure and Properties (Butterworths, London, 1976; Metallurgiya, Moscow, 1979).
I. G. Brodova, E. V. Shorokhov, I. G. Shirinkina, I. N. Zhgilev, T. I. Yablonskikh, V. V. Astaf’ev, and O. V. Antonova, “Evolution of the structure formation during dynamic pressing of the AMts alloy,” Phys. Met. Metallogr. 105, 594–601 (2008).
J.E. Hatch, Aluminum: Properties and Physical Metallurgy. A Handbook (ASM, Metals Park, Ohio, 1984; Metallurgiya, Moscow, 1989).
Structure and Properties of Semi-Finished Products from Aluminum Alloys. A Handbook, Ed. by Z. N. Archukova, G. A. Balakhontsev, et al. (Metallurgiya, Moscow, 1984), [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.G. Shirinkina, I.G. Brodova, V.V. Astaf’ev, T.I. Yablonskikh, V.V. Stolyarov, A.A. Potapova, A.V. Frolova, V.V. Mukhgalin, A.L. Bel’tyukov, 2014, published in Fizika Metallov i Metallovedenie, 2014, Vol. 115, No. 12, pp. 1289–1298.
Rights and permissions
About this article
Cite this article
Shirinkina, I.G., Brodova, I.G., Astaf’ev, V.V. et al. Structural and phase transformations in aluminum-copper alloys under the effect of electroplastic deformation. Phys. Metals Metallogr. 115, 1221–1230 (2014). https://doi.org/10.1134/S0031918X14090129
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0031918X14090129