The Archaellum of Methanospirillum hungatei Is Electrically Conductive.

Microbially produced electrically conductive protein filaments are of interest because they can function as conduits for long-range biological electron transfer. They also show promise as sustainably produced electronic materials. Until now, microbially produced conductive protein filaments have been reported only for bacteria. We report here that the archaellum of Methanospirillum hungatei is electrically conductive. This is the first demonstration that electrically conductive protein filaments have evolved in Archaea Furthermore, the structure of the M. hungatei archaellum was previously determined (N. Poweleit, P. Ge, H. N. Nguyen, R. R. O. Loo, et al., Nat Microbiol 2:16222, 2016, https://doi.org/10.1038/nmicrobiol.2016.222). Thus, the archaellum of M. hungatei is the first microbially produced electrically conductive protein filament for which a structure is known. We analyzed the previously published structure and identified a core of tightly packed phenylalanines that is one likely route for electron conductance. The availability of the M. hungatei archaellum structure is expected to substantially advance mechanistic evaluation of long-range electron transport in microbially produced electrically conductive filaments and to aid in the design of "green" electronic materials that can be microbially produced with renewable feedstocks.IMPORTANCE Microbially produced electrically conductive protein filaments are a revolutionary, sustainably produced, electronic material with broad potential applications. The design of new protein nanowires based on the known M. hungatei archaellum structure could be a major advance over the current empirical design of synthetic protein nanowires from electrically conductive bacterial pili. An understanding of the diversity of outer-surface protein structures capable of electron transfer is important for developing models for microbial electrical communication with other cells and minerals in natural anaerobic environments. Extracellular electron exchange is also essential in engineered environments such as bioelectrochemical devices and anaerobic digesters converting wastes to methane. The finding that the archaellum of M. hungatei is electrically conductive suggests that some archaea might be able to make long-range electrical connections with their external environment.

e-Pili enable unprecedented long-range (micrometer) electron conduction along the length of a protein filament, which not only has important biological implications but also suggests diverse applications for these "protein nanowires" as a sustainably produced electronic material (1,(5)(6)(7). There is substantial debate over the potential mechanisms of long-range electron transport in e-pili (1,6,7). Although it has been possible to determine the structure of some pili with cryo-electron microscopy (cryo-EM) (8), an experimentally determined structure of G. sulfurreducens e-pili that could help clarify electron transport mechanisms is not available. However, from the known importance of aromatic amino acids for the conductivity of e-pili (1), synthetic electrically conductive protein nanowires have been designed that are either microbially produced (9) or assembled in vitro (10).
The finding that e-pili have independently evolved multiple times in Bacteria (3) raised the question of whether conductive protein filaments have ever evolved in Archaea. Diverse Archaea exchange electrons with their extracellular environment, reducing extracellular electron acceptors or engaging in direct interspecies electron transfer (DIET) with bacteria (2,11). The alpha-helix filament structure of archaella, as well as the mechanisms for assembly and export, resembles that of type IV pili (8,12,13). However, detailed analysis of the Methanospirillum hungatei archaellum also revealed important differences from previously described structures of bacterial pili, such as a lack of an inner channel and a distinct tertiary structure and subunit packing arrangement (13).
Initial screening of the relative conductivity of diverse bacterial pili is typically determined with conductive atomic force microscopy in which samples are deposited on a conductive surface and a conductive tip serves as a translatable top electrode (16)(17)(18)(19). Therefore, 100 l of a culture of M. hungatei grown in low-phosphate medium to induce archaellum expression (15) was drop-cast onto highly oriented pyrolytic graphite (HOPG), washed, dried, and then equilibrated at 40% relative humidity for conductivity measurements. This process was designed to mimic physiologically relevant conditions by avoiding chemical alteration of the archaellum structure and determining conductivity of hydrated archaella.
Cells with a polar archaellum with the expected height of 10 nm (13) were readily detected with topographic imaging in contact mode ( Fig. 1a, b, and d). Conductive imaging demonstrated that the archaellum was electrically conductive (Fig. 1c to e; see also Fig. S1 and S2 in the supplemental material). Point-mode current-voltage (I-V) spectroscopy revealed a linear-like response with currents that were higher than at the same voltage with G. sulfurreducens e-pili prepared in the same manner (Fig. 1e). The pili of G. sulfurreducens strain Aro-5, which produces pili specifically designed for low conductivity (20,21), exhibited very low currents at the same voltages (Fig. 1e). Conductance estimated from the linear portion of the I-V curves yielded conductance estimates of 16.9 Ϯ 3.9 nS (mean Ϯ standard deviation; n ϭ 9; three independent points on three separate archaella; 8,000 points of measurement taken for each experimental I-V curve comprised of quadruplicate 0.6-V-bias sweeps) for the archaella, 4.5 Ϯ 0.3 nS for the wild-type G. sulfurreducens pili, and only 0.004 Ϯ 0.002 nS for the Aro-5 pili. The estimated conductance of the wild-type G. sulfurreducens pili was similar to the values found in previous studies that employed a comparable measurement technique (16).
These results demonstrated that the M. hungatei archaellum is conductive and suggest that a search for electrically conductive protein filaments in other Archaea as well as the Eukarya is warranted. It has been proposed that electrically conductive filaments of anaerobic methane-oxidizing archaea may be conduits for extracellular transfer to electron-accepting partners (22). Other possible benefits of archaellum conductivity might include facilitating attachment by dissipating charge barriers between cells and surfaces or electrical signaling between cells. Expression of synthetic, poorly conductive pili has played an important role in elucidating the function of e-pili in Geobacter species (1). Similar functional studies of M. hungatei will require the development of genetic tools for this microbe.
The M. hungatei archaellum contains a core of closely packed phenylalanines. The cryo-EM structure of the M. hungatei e-archaellum (Fig. 2a), previously reported by Poweleit et al. (13), provides a much needed first opportunity to directly evaluate possible routes for long-range electron transport along a biologically produced protein filament. Aromatic rings of phenylalanine, tyrosine, and tryptophan are grouped into three well-separated regions: an outer sleeve ( Fig. 2b and Fig. S5a), a middle sleeve ( Fig. 2b and Fig. S5b), and a core (Fig. 2c). It was previously noted that the N-terminal phenylalanine residues in the archaellin subunits (Phe1) interact to "create a spokes effect via a -stacking sandwich" that plays a key role in stabilizing the structure (13). Additional analysis of the distribution of aromatic amino acids (Fig. 2b and c and  Fig. S5) further revealed that the aromatic rings of Phe1 and Phe13 in the core of the structure are packed almost as close as is physically possible (distances between ring centers of Phe1 and Phe13 of 4.5 and 5.1 Å), with angled T-shaped geometric orientations, which previous studies have suggested may enableinteractions (23). Furthermore, recent experimental evidence has indicated that, even in the absence ofstacking, phenylalanines within the hydrophobic core of an amino acid ␣-helical structure can facilitate long-range electron transport (10,24). Therefore, our working hypothesis is that the Phe1-Phe13 core is at least one of the features contributing to the e-archaellum conductivity. Other aromatic amino acids of note include Phe20 (Fig. 2b), which is positioned close to the Phe1-Phe13 core, as well as outer and middle sleeves of aromatics that are well separated from each other and from the Phe1,13,20 core (Fig. 2b). Unlike the core, the outer and middle aromatic sleeves lack any closely spaced continuous chain of aromatics extending the length of the filament (Fig. S5).
Analogous to recent studies of G. sulfurreducens e-pili (20,21,25,26), genetic manipulations to alter the positions of aromatic amino acids or other amino acids that may promote conductivity within the M. hungatei archaellum could lead to a better understanding of the structural features contributing to conductivity. The added benefit of such studies with the M. hungatei e-archaellum is that it will be possible to directly examine structural modifications to electron conductance pathways with cryo-EM. In the absence of genetic tools for M. hungatei, it will be necessary to heterologously express the gene for the M. hungatei archaellin in a genetically tractable archaeal host, similar to the expression of heterologous e-pili in G. sulfurreducens (3) or to identify a similar e-archaellum in a genetically tractable archaeon.
Microbially produced protein nanowires show substantial promise as a sustainable "green" electronic material with possibilities for functionalization and biocompatibility not available with other nanowire materials (1, 5-7). e-Archaella offer a unique opportunity to directly examine how synthetic designs to tune conductivity and/or add functionality influences protein nanowire structure, enabling a less empirical approach to the design of protein nanowire electronics. Methods. M. hungatei was grown as previously described (1) in low-phosphate medium to induce archaellum expression. An aliquot (100 l) of the culture was drop-cast onto highly oriented pyrolytic graphite (HOPG). Cells were allowed to attach to the HOPG for 10 min, and then the liquid was removed with a pipette tip. The surface was washed twice with 100 l of deionized water, the surface was blotted dry at the edge with a Kimwipe, and the sample was placed in a desiccator overnight. All samples were equilibrated with atmospheric humidity (40%) inside the atomic force microscope (AFM) chamber for at least 2 h at 26.1°C at 1.1 mbarg. Conductive atomic force microscopy was performed using an Oxford Instruments/Asylum Research Cypher ES atomic force microscope. All topographic and current imaging was performed with a Pt/Ir-coated Arrow-ContPT tip with a 0.36701-N/m spring constant (NanoWorld AG, Neuchâtel, Switzerland). Topographic imaging was performed at a force of 0.1 nN. The conductive tip was attached to an ORCA dual-gain transimpedance amplifier and held at ground to serve as a translatable top electrode. A 300-mV bias was applied to the HOPG, and the locally detected current response of the archaellum was identified. Point-mode current-voltage (I-V) spectroscopy was performed by applying the conducting AFM tip at a force of 1 nN to the top of the archaellum and performing a voltage sweep at a frequency of 0.99 Hz. Continual force and current responses were collected for each I-V curve (Fig. S3) to ensure good consistent contact with the sample and avoid archaellum damage. The HOPG was periodically touched between samples to ensure the correct I-V response and tip quality (Fig. S4). Conductance was calculated from the linear portion of each I-V curve (Ϫ0.2 V to 0.2 V) as previously described (2). Average conductance and standard deviation were calculated for each of the three independent points on the three independent archaella.