Paper
25 September 1979 Metal Optics Versus Glass Optics
K. Lindsey, A. Franks
Author Affiliations +
Proceedings Volume 0163, Advances in Optical Production Technology II; (1979) https://doi.org/10.1117/12.956911
Event: Advances in Optical Production Technology, 1979, London, United Kingdom
Abstract
A limited range of materials is available for optical components of the highest quality. The quality which can be achieved depends not only on the material but also on the blank manufacturing method, the machining and finishing techniques and often, in the case of metals, on the properties of a more readily machinable or polishable overlayer. The materials and manufacturing methods employed will also determine whether the component will maintain its specification throughout its proposed lifetime during which it may be subjected to adverse mechanical and thermal stresses and corrosive conditions. For the highest quality optics, pure synthetic vitreous silica and the remelted quartzes are the preferred materials. If severe thermal changes are encountered in use, then ULE silica or the optical glass ceramics may be preferred despite their somewhat greater inhomogeneity. The best metallic optical components are made of beryllium coated with electroless nickel. This combination is inferior to glasses in its stability but has a superior stiffness to weight ratio and is superior to all but ULE silica and the glass ceramics in its response to rapid thermal fluctuations.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
K. Lindsey and A. Franks "Metal Optics Versus Glass Optics", Proc. SPIE 0163, Advances in Optical Production Technology II, (25 September 1979); https://doi.org/10.1117/12.956911
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Glasses

Polishing

Surface finishing

Aluminum

Beryllium

Metals

Silica

RELATED CONTENT

Low temperature GRISM direct bonding
Proceedings of SPIE (September 02 2015)
Itek Optical Technology In Manufacturing And Metrology
Proceedings of SPIE (February 21 1986)
Large active mirror in aluminium
Proceedings of SPIE (November 01 1991)
Selection Of Materials And Processes For Metal Optics
Proceedings of SPIE (January 15 1976)

Back to Top