Paper
2 January 1986 Nanometer-resolution SEM Metrology in a Hostile Laboratory Environment
Kevin M. Monahan, David S. Lim
Author Affiliations +
Abstract
In microelectronic applications, electron beam measurements are frequently plagued by electromagnetic interference and vibration in the fabrication environment. In the past, efforts to control environmental effects have focused on attempts to decouple the measurement apparatus from the source of interference. Rerouting power cables, balancing phase loads, shielding with mu-metal and copper screen, isolating on concrete pads, and mounting on vibrationally damped columns have all been tried with some degree of success. The com-mon problem with these active solutions is that retrofitting an existing facility can be prohibitively expensive. We have found, however, that where environmental effects are relatively well known, they can be removed from the data a posteriori. In particular, 60-Hz electromagnetic interference, appearing as sawtooth patterns in non-synchronous SEM images, is probably the most common deleterious effect experienced in fabrication areas. Techniques are demonstrated by which tuned integrating and differentiating filters can automatically reduce the measurement error by as much as 80 percent.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kevin M. Monahan and David S. Lim "Nanometer-resolution SEM Metrology in a Hostile Laboratory Environment", Proc. SPIE 0565, Micron and Submicron Integrated Circuit Metrology, (2 January 1986); https://doi.org/10.1117/12.949748
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metrology

Scanning electron microscopy

Photoresist materials

Calibration

Electromagnetic interference

Environmental sensing

Crystals

Back to Top