Paper
23 May 2008 Formation of grooves in SiO2 coated silicon using femtosecond ytterbium DPSS laser
Andrius Melninkaitis, Tadas Balčiūnas, Valdas Sirutkaitis, Valdemaras Juzumas, Julius Janušonis, Gintas Šlekys
Author Affiliations +
Abstract
Femtosecond laser micromachining of grooves in the SiO2 coated crystal silicon is investigated using 300 fs laser pulses at a center wavelength of 1030 nm. A novel chirped pulse amplified femtosecond Yb:KGW laser source (Pharos, Light Conversion, Lithuania) with high pulse repetition rate of 1- 350 kHz and high average power up to 8 W is employed. The ablation depth of grooves as a function of pulse repetition rate, number of passes over the same groove, and the light polarization relative to the cutting direction is investigated. Different scanning algorithms as well as influence of the focal plane height relative to the sample are investigated.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrius Melninkaitis, Tadas Balčiūnas, Valdas Sirutkaitis, Valdemaras Juzumas, Julius Janušonis, and Gintas Šlekys "Formation of grooves in SiO2 coated silicon using femtosecond ytterbium DPSS laser", Proc. SPIE 7005, High-Power Laser Ablation VII, 70050L (23 May 2008); https://doi.org/10.1117/12.778478
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Silica

Laser ablation

Polarization

Femtosecond phenomena

Semiconductor lasers

Micromachining

Back to Top