High-resolution deployable CubeSat prototype

Noah Schwartz; William Brzozowski; Maria Milanova; Katherine Morris; Stephen Todd; Zeshan Ali; Jean-Francois Sauvage; Alex Ward; David Lunney; Donald MacLeod

doi:10.1117/12.2562255

13 December 2020 High-resolution deployable CubeSat prototype

Noah Schwartz, William Brzozowski, Maria Milanova, Katherine Morris, Stephen Todd, Zeshan Ali, Jean-Francois Sauvage, Alex Ward, David Lunney, Donald MacLeod

Author Affiliations +

Proceedings Volume 11443, Space Telescopes and Instrumentation 2020: Optical, Infrared, and Millimeter Wave; 1144331 (2020) https://doi.org/10.1117/12.2562255
Event: SPIE Astronomical Telescopes + Instrumentation, 2020, Online Only

Conference Poster

Abstract

The volume available on-board small satellites limit the optical aperture to a few centimetres, which limits the GroundSampling Distance (GSD) in the visible to approximately 3 m at 500 km. We present the latest development of a laboratory demonstrator for a deployable telescope that will triple the achievable ground resolution and quadruple the photometric capability from a CubeSat imager. In this paper, we present the overall opto-mechanical design of a Cassegrain telescope with a segmented primary mirror with a 30 cm baseline. The segments are folded for launch and unfold in space. To enable diffraction-limited imaging, piston, tip, and tilt (PTT) on each of the mirror segments should be below 12 nm RMS. The key challenge is to ensure phasing, and this precision level will require an active phasing stage. We present laboratory results of deployment and active phasing of the primary mirror segments. The initial deployment is performed using shaped memory alloy that deploy mirror segments. We demonstrate a repeatability below ±4.5 μm, enabling the four PSFs (one for each mirror segment) to be imaged on the detector simultaneously. An alignment step using compact and calibrated capacitive sensors allows for a control of the mirror positions in PTT below the wavelength. Finally, we investigate the sensitivity of misalignments of a deployable secondary mirror and show that it is well within reach of the technology developed in this study.

Citation Download Citation

Noah Schwartz, William Brzozowski, Maria Milanova, Katherine Morris, Stephen Todd, Zeshan Ali, Jean-Francois Sauvage, Alex Ward, David Lunney, and Donald MacLeod "High-resolution deployable CubeSat prototype", Proc. SPIE 11443, Space Telescopes and Instrumentation 2020: Optical, Infrared, and Millimeter Wave, 1144331 (13 December 2020); https://doi.org/10.1117/12.2562255

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available