Paper
21 February 2020 High power narrow-linewidth Raman amplifier and its limitation
Author Affiliations +
Abstract
We investigated the limitations in output power generated by a high power narrow-linewidth Raman fiber amplifier. The pump was produced by a kW-level all-fiber Yb-doped amplifier emitting at 1060 nm, whose seed linewidth could be changed. The Raman seed was a narrow-linewidth signal at 1110 nm co-propagating with the laser at 1060 nm. The main Raman conversion occurred in the passive fiber at the amplifier output. We identified cross-phase modulation (XPM) as a main reason for broadening of the Raman light by using different pump sources, which is a first limitation. An improved setup was limited at approximately 600 W of Stokes output power by a threshold-like onset of a transverse mode instability. Since the instability was not observed without a Stokes seed and the temperatures of the active fiber with and without Stokes seed are equal, this constitutes the first direct observation of transverse mode instabilities (TMI) induced by SRS in a passive fiber.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Victor Distler, Friedrich Möller, Maximilian Strecker, Gonzalo Palma-Vega, Till Walbaum, Thomas Schreiber, and Andreas Tünnermann "High power narrow-linewidth Raman amplifier and its limitation", Proc. SPIE 11260, Fiber Lasers XVII: Technology and Systems, 1126005 (21 February 2020); https://doi.org/10.1117/12.2544622
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber amplifiers

Optical amplifiers

Fiber lasers

Raman scattering

High power fiber amplifiers

High power fiber lasers

Back to Top