Paper
26 February 2018 5-kW single stage all-fiber Yb-doped single-mode fiber laser for materials processing
Author Affiliations +
Proceedings Volume 10512, Fiber Lasers XV: Technology and Systems; 105120C (2018) https://doi.org/10.1117/12.2287624
Event: SPIE LASE, 2018, San Francisco, California, United States
Abstract
Stimulated Raman scattering gives back reflection sensitivity to a high power fiber laser. Therefor SRS suppression is necessary in order to realize stable laser processing by a high power fiber laser. A 5-kW single-mode ytterbium doped fiber laser with a 20-m long delivery fiber has been realized. The fiber laser is an all-fiber single-stage Fabry-Perot system in a co-pumping configuration. The optical to optical efficiency was 80% at the output power of 5.0 kW. And the M-squared figure of 1.3 was obtained. The Stokes light by SRS is suppressed to 45 dB below the laser output by using fibers with the effective mode area of 600 μm2 . While SRS was well suppressed, four wave mixing was observed with the frequency shift of ~6 THz. Four wave mixing between the fundamental mode and the secondary modes is believed to take place. Four wave mixing is believed not to give back reflection sensitivity to the fiber laser. The 5-kW single-mode fiber laser was applied to laser processing. Bead-on-plate tests were carried out with a galvanometer scanner. The laser ran without stopping nor damaging the laser system even during processing highly reflective material. This implies that our SRS suppressed single-mode fiber laser can be used practically in most of processing systems.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kensuke Shima, Shinya Ikoma, Keisuke Uchiyama, Yuya Takubo, Masahiro Kashiwagi, and Daiichiro Tanaka "5-kW single stage all-fiber Yb-doped single-mode fiber laser for materials processing", Proc. SPIE 10512, Fiber Lasers XV: Technology and Systems, 105120C (26 February 2018); https://doi.org/10.1117/12.2287624
Lens.org Logo
CITATIONS
Cited by 25 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Single mode fibers

Laser processing

Materials processing

Raman scattering

Copper

Four wave mixing

RELATED CONTENT

Evolution of the nth Stokes due to SRS in single...
Proceedings of SPIE (September 27 2013)
Triple-clad ytterbium-doped fiber for 10 kW fiber laser
Proceedings of SPIE (January 01 1900)
8 kW single stage all fiber Yb doped fiber laser...
Proceedings of SPIE (February 21 2020)
2 kW single mode fiber laser with 20 m long...
Proceedings of SPIE (March 09 2016)
3 kW single stage all fiber Yb doped single mode...
Proceedings of SPIE (February 22 2017)

Back to Top