Paper
24 April 1995 Use of liquid crystal display technology in ocular prosthesis
Desmond L. Seekola, F. Wilhelm Leuschner
Author Affiliations +
Proceedings Volume 2408, Liquid Crystal Materials, Devices, and Displays; (1995) https://doi.org/10.1117/12.207502
Event: IS&T/SPIE's Symposium on Electronic Imaging: Science and Technology, 1995, San Jose, CA, United States
Abstract
Use of liquid crystal display technology for ocular prosthesis was recently proposed. Liquid crystal light valves are used for the purpose of light modulation to control pupil size proportional to incident light intensity. In the current study two different types of liquid crystal technology are tested for use in a prosthetic eye. The first type is the conventional twisted nematic (TN) cell. The second type of technology is a color dispersion system consisting of liquid crystal droplets in a polymer binder. Because of the principle of operation of the prosthetic device, in the off state the display should block light and appear black. This is easily achieved with TN cells. For the dispersed technology, a colored dispersed system using a black dichroic dye is used so that the display is black in the off state. The response of the two types of technology are measured and compared for ocular prosthesis. Factors such as photostability, battery life, alternate modes of operation, and the use of other types of liquid crystal display technology are also discussed.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Desmond L. Seekola and F. Wilhelm Leuschner "Use of liquid crystal display technology in ocular prosthesis", Proc. SPIE 2408, Liquid Crystal Materials, Devices, and Displays, (24 April 1995); https://doi.org/10.1117/12.207502
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Eye

Polymers

LCDs

Liquid crystals

Epoxies

Absorption

Polymethylmethacrylate

Back to Top