Stability analysis of the martensitic phase transformation in Co2NiGa Heusler alloy

Anjana Talapatra, Raymundo Arróyave, Peter Entel, I. Valencia-Jaime, and Aldo H. Romero
Phys. Rev. B 92, 054107 – Published 13 August 2015

Abstract

Phase competition and the subsequent phase selection are important characteristics of alloy systems exhibiting numerous states of distinct symmetry but comparable energy. The stoichiometric Co2NiGa Heusler alloy exhibits a martensitic transformation with concomitant reduction in symmetry from an austenitic L21 phase (cubic) to a martensitic L10 phase (tetragonal). A structural search was carried out for this alloy and it showed the existence of a number of structures with monoclinic and orthorhombic symmetry with ground state energies comparable to and even less than that of the L10 structure, usually reported as the ground state at low temperatures. We describe these structures and focus in particular on the structural transition path from the L21 to tetragonal and orthorhombic structures for this material. Calculations were carried out to study the Bain (L21L10) and Burgers (L21hcp) transformations. The barrierless Burgers path yielded a stable martensitic phase with orthorhombic symmetry (O) with energy much lower—beyond the expected uncertainty of the calculation methods—than the known tetragonal L10 martensitic structure. This low-energy structure (O) has yet to be observed experimentally and it is thus of scientific interest to discern the cause for the apparent discrepancy between experiments and calculations. It is postulated that the Co2NiGa Heusler system exhibits a classic case of the phase selection problem: although the unexpected O phase may be relatively more stable than the L10 phase, the energy barrier for the (L21O) transformation may be much higher than the barrier to the (L21L10) transformation. To validate this hypothesis, the stability of this structure was investigated by considering the contributions of elastic and vibrational effects, configurational disorder, magnetic disorder, and atomic disorder. The calculations simulating the effect of magnetic disorder/high temperature as well as the atomic disorder simulations showed that the transformation from L21 to L10 is favored over the Burgers path at high temperatures (large magnetic disorder). These conditions are prevalent upon cooling the material from high temperatures (the usual synthesis route), and this provides a plausible explanation of why L10 and not the O phase is observed. Other ground states (not observed in experiments but predicted through calculations) are ruled out in terms of symmetry relations as well as through considerations of elastic barriers to their nucleation.

  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
  • Figure
3 More
  • Received 3 June 2015
  • Revised 30 July 2015

DOI:https://doi.org/10.1103/PhysRevB.92.054107

©2015 American Physical Society

Authors & Affiliations

Anjana Talapatra1,*, Raymundo Arróyave1,2, Peter Entel3, I. Valencia-Jaime4,5, and Aldo H. Romero5

  • 1Department of Mechanical Engineering, Texas A&M University, College Station, Texas 77843, USA
  • 2Department of Materials Science & Engineering, Texas A&M University, College Station, Texas 77843, USA
  • 3Faculty of Physics and CENIDE, University of Duisburg-Essen, 47048 Duisburg, Germany
  • 4CINVESTAV-Querétaro, Libramiento Norponiente No. 2000, Real de Juriquilla, 76230 Querétaro, México
  • 5Department of Physics, West Virginia University, Morgantown, West Virginia 26506, USA

  • *anjanatalapatra@tamu.edu

Article Text (Subscription Required)

Click to Expand

References (Subscription Required)

Click to Expand
Issue

Vol. 92, Iss. 5 — 1 August 2015

Reuse & Permissions
Access Options
CHORUS

Article Available via CHORUS

Download Accepted Manuscript

Authorization Required


×
×

Images

×

Sign up to receive regular email alerts from Physical Review B

Log In

Cancel
×

Search


Article Lookup

Paste a citation or DOI

Enter a citation
×