Optical hole burning and spectral diffusion in ruby

A. Szabo and R. Kaarli
Phys. Rev. B 44, 12307 – Published 1 December 1991
PDFExport Citation

Abstract

Frequency-domain optical hole burning of the R1 line [4A2(-1/2)⇆E¯(-1/2) transition] in dilute ruby is studied at 2 K and with a field of 3.6 kG applied along the c axis. A pump-probe (PP) technique is used with precise probe-frequency shifting obtained by an acousto-optic modulator. For sufficiently short PP pulses (50 μs), two holes (narrow and wide) are observed. The narrow (∼20 kHz half width at half maximum at low power) hole-width dependence on Rabi frequency approximately agrees with that inferred from free-induction-decay measurements. For the present concentration (0.0034 wt. % Cr2O3) and field, the narrow hole width is determined by fluctuating fields produced by Cr-Cr spin flips [A. Szabo, T. Muramoto, and R. Kaarli, Phys. Rev. B 42, 7769 (1990)]. When the PP delay time is varied, the amplitude of the narrow hole decays with a 1/e time constant of ∼300 μs compared to the E¯ fluorescence lifetime of 4 ms. The wide hole (∼500 kHz half width at half maximum) is due to Al-Cr superhyperfine interactions and is created by a spectral diffusion mechanism driven by Al-spin flipping in the host lattice.

  • Received 1 July 1991

DOI:https://doi.org/10.1103/PhysRevB.44.12307

©1991 American Physical Society

Authors & Affiliations

A. Szabo and R. Kaarli

  • Institute of Microstructural Sciences, National Research Council of Canada, Ottawa, Ontario, Canada K1A 0R6

References (Subscription Required)

Click to Expand
Issue

Vol. 44, Iss. 22 — 1 December 1991

Reuse & Permissions
Access Options
Author publication services for translation and copyediting assistance advertisement

Authorization Required


×
×

Images

×

Sign up to receive regular email alerts from Physical Review B

Log In

Cancel
×

Search


Article Lookup

Paste a citation or DOI

Enter a citation
×