Abstract
Soft grippers are suitable for gripping various objects without damage owing to their high flexibility. But current soft grippers have a general problem of insufficient gripping force. To grip objects with different mass and sizes on assembly line safely and reliably, a novel pneumatic soft gripper with a jointed endoskeleton structure was developed and fabricated successfully. The actuation and force bearing functions of the gripper were separated to increase the gripping force. Moreover, to control the output force of the finger tip of the soft gripper, a fuzzy auto-tuning PID controller was designed and the relevant parameters of the controller were determined. Furthermore, a test platform with the designed fuzzy auto-tuning PID controller was developed to control the output force of the finger tip. The test results showed that the controller was able to maintain the desired target output force with a maximum deviation of 0.6 N. At last, the soft gripper was used to grip material objects for testing. From the experiment, it indicated that the output force of the finger tip can reach up to the desired values accurately and various objects can be gripped safely and reliably.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.