Improvement of the railway track efficiency by minimizing the rail wear in curves

The article presents the analysis results for the parameters measurements of the rail track and the ratio between values of the vertical and side wears of rails in curves of different radii under different operating conditions. It is shown that the installed elevations of the outer rail do not meet the contemporary requirements in increasing the efficiency of the track while minimizing the rail wear. At the second stage of the research, various sections were examined by type of traction, technical equipment, plan parameters and the longitudinal profile. As an example, the results of calculations are presented in Lviv-Rava-Ruska section as a promising project that can ensure the integration of railway transport in Lviv-Warsaw direction. Analysis of the results obtained with the help of the software package – MoveRW and RWPlan programmes, allowed to determine such a combination of elevations of the outer rail in curves, so that trains of different categories realize the lowest values of cross unbalanced accelerations, which provide the minimum wear of rails in compliance with regulatory requirements for unbalanced acceleration, changing this acceleration in time, elevating speed of a wheel on the removal of the outer rail.