Abstract
In this study, we performed the optimization study of selective laser sintering (SLS) 3D printing mode for the material is a mixture of Green Bean Powder and Polylactic acid powder (GBP/PLA) to createed a new biodegradable synthetic material (GBCP). The study was designed with 2 factors changing: print speed and laser power, fixed factor is the ratio of GBP/PLA is 20/80. Through Scanning Electron Microscope (SEM) to assess the structure of materials; tensile strength, flexural strength and impact strength evaluate the mechanical properties of materials. Experimental results show that with the printing speed of 2 m/s, the printing power of 21W, the GBP/PLA material has the best quality with a tensile strength of 2.89 MPa, flexural strength of 5.91MPa and impact strength is 0.57KJ.m2.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.