Abstract
Most of LPG explosions are caused by undetected gas leakage in the pre-detection condition. So that, LPG detection system is needed. The purpose of this system is to detect gas leakage, neutralize it, and prevent the explosion. Gas leakage could happen due to improper regulator installation or the hose is broken. This detection should not work in just one location because gas can leak at the gas regulator and its hose. Therefore, Wireless Sensor Network (WSN) is one of the methods that suitable for detecting gas leakage in the wider area. This method uses two or more gas sensors to detect leakage in two or more locations around the gas tube and its distribution line. WSN system works based on gas sensor MQ-6 and wireless module Bluetooth HC-05. Explosion prevention system works based on alarm/buzzer, exhaust fan, and automatic gas regulator. If the gas leaks, the sensor will send its data wirelessly to Arduino. Then, explosion prevention system will be activated. The system will turn the alarm/buzzer on, automatically releases gas regulator, and neutralizes the air with the exhaust fan. Both systems will be fully controlled by Arduino platform.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.